2,231 research outputs found

    Monolithic Arrays of Grating-Surface-Emitting Diode Lasers and Quantum Well Modulators for Optical Communications

    Get PDF
    The electro-optic switching properties of injection-coupled coherent 2-D grating-surface-emitting laser arrays with multiple gain sections and quantum well active layers are discussed and demonstrated. Within such an array of injection-coupled grating-surface-emitting lasers, a single gain section can be operated as intra-cavity saturable loss element that can modulate the output of the entire array. Experimental results demonstrate efficient sub-nanosecond switching of high power grading-surface-emitting laser arrays by using only one gain section as an intra-cavity loss modulator

    Comparison of acidic and enzymatic pectin extraction from passion fruit peels and its gel properties

    Get PDF
    The influences of extractor concentration, extraction temperature and time on the yield of pectin and degree of esterification (DE) were investigated by the acidic and enzymatic extraction methods. Citric acid and Celluclast were selected as pectin extractors for environmentally friendly reasons. The peels of yellow passion fruit using the acidic and enzymatic extraction methods gave pectin yield of 7.16 and 7.12%, and DE of 71.02 and 85.45% in the optimized condition of extraction time of 102 min with citric acid concentration of 0.19% (w/w) at 75C and Celluclast concentration of 1.67% (w/w) at 61.11C, respectively. The enzymatic extraction method has greater capability of producing high methoxyl pectin. The morphological features of fruit peel powder and the extracted pectin examined by scanning electron microscopy suggested that the nanostructure of wet passion fruit pectin was dependable on the type of extraction process. The formed pectin gel also has pseudoplastic liquid behavior and its viscosity was greatly affected by sugar. Pectin has been intensively used as natural gelling agent and stabilizer to alter rheological properties in food ingredients by most food processing industries to achieve desired textural quality. Pectin could be recovery from fruit wastes. The conversion of passion fruit peel into pectin offers great scope for utilization. Citric acid and enzymatic extraction methods are effectively used for pectin extraction which may be of interest by pectin industry and consumer with these eco-friendly processing technology with no using harmful chemicals. Furthermore, scientific work of this study such as the optimized condition, morphological features of extracted pectin and pectin gel formation contributes valuable information on pectin, which could be beneficial for pectin industry improving the process quality of pectin as well as process profitability

    Prediction of ammonia concentration in water based on microwave spectroscopy

    Get PDF
    Ammonia is a common pollutant in water as the result of runoff in agricultural areas where it is applied as fertilizer. It must be monitored regulary for safety purpose. The current testing technique does not allow on-site measurement as the equipment are bulky, the measurement process is time-consuming and tedious with additional mixing reagents. In this study, the presence of ammonia in distilled water is estimated from open-ended coaxial probe in the range of 200 MHz to 14000 MHz. Experimental results were obtained from two set of samples with seven different ammonia concentration each. The measurements are repeated thrice hence producing forty-two data sets with 550 points. Both curve fitting and multiple regression analysis were considered to perform valid ammonia concentration projection. Validation based on 5-fold and 10-fold cross validation suggested the feasibility of the technique as it presents root mean square error (RMSE) which is less than 0.02 in the ammonia prediction. Detection method based on open-ended probe would be convenient, simple and accurate method for in-situ determination of ammonia concentration

    Enhancement of thermal and mechanical stabilities of silicon doped titanium nitride coating by manipulation of sputtering conditions

    Get PDF
    This study investigates the influence of substrate (AISI M42 tool steel) bias voltage (from −30 to −80 V), on the mechanical properties of magnetron sputtered TiSiN coating derived from Ti and Si targets. Thermal stability, microstructure (crystallite size, microstrain, lattice constant), morphology and mechanical (hardness, Young's modulus, residual stresses) properties, of the deposited TiSiN coatings, were investigated with synchrotron powered X-ray diffraction (SR-XRD), X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and nanoindentation techniques. Rietveld analysis, of the in-situ SR-XRD, in the temperature range of 25–800 °C, demonstrated cubic TiN form in (Ti,Si)N solid solutions, with TiO2 and Ti2O3 identified at lower bias voltages. Density functional theory supplemented the experimental results. Increase in the bias voltage resulted in: (i) a decrease in Si content, (ii) significant smoothening of surface morphology, (iii) change in the phase composition and microstructure, (iv) improved oxidation resistance and thermal oxidation threshold, and (v) hardness and Young's modulus of the coatings increased up to 50% to 33 GPa and 450 GPa, respectively

    Design new voltage balancing control series connected for HV-IGBT`s

    Get PDF
    The insulated gate bipolar transistors (IGBTs) are widely used in various applications as they require low gate drive power and gate voltage. This paper proposes an active gain circuit to maintain voltage stability of series-connected IGBTs for high voltage applications. The novel gate driver circuit with closed-loops control amplifies the gate signal while restricting the IGBT emitter voltage below a predetermined level. With the proposed circuit, serial-connected IGBTs can replace high-voltage IGBTs (HV-IGBTs) for high-voltage applications through the active control of the gate signal time delay. Closed-loop controls function is to charged current to the gate to restrict the IGBT emitter voltage to a predetermined level. This paper also presents the experiment on the gate driver capability based on a series-connected IGBTs with three IGBTs and a snubber circuit. The experimental results show a voltage offset with active control with a wide variation in load and imbalance conditions. Lastly, the experimental results are validated with the simulation results, where the simulation results agree with the experimental results

    Effect of Chilled Air Coolant on Surface Roughness and Tool Wear When Machining 2205 Duplex Stainless Steel

    Get PDF
    Cutting fluid is important to enhance machinability. However, conventional cutting fluid is uneconomical and hazardous to environment and health. Thus, non conventional coolant method is studied in order to overcome these problems. In this study, the effect of chilled air coolant on surface roughness and tool wear when machining 2205 duplex stainless steel is investigated. The compressed air is chilled by using vortex tube. Cold air and hot air is produced by means of vortex tube from the source of compressed air. This study also investigated the comparison of machining performance between conventional flood coolant and chilled air coolant. The tests were conducted on a conventional turning machine with TiAlN coated carbide tools and the constant parameters were feed rate, cutting depth, and cutting speed. Surface roughness and tool wear were measured after each run and the results were analysed. The experiment results showed that chilled air coolant gave better surface finish compared to conventional flood coolant. However, tool life was better when using conventional flood coolant compared to chilled air coolant. For both coolant method, the result showed decreasing trend for surface roughness and tool wear values when the temperature of chilled air coolant decreased

    Blood-based biomarkers for detecting mild osteoarthritis in the human knee

    Get PDF
    SummaryObjectiveThis study was designed to test the utility of a blood-based approach to identify mild osteoarthritis (OA) of the knee.MethodsBlood samples were drawn from 161 subjects, including 85 subjects with arthroscopically diagnosed mild OA of the knee and 76 controls. Following RNA isolation, an in-house custom cDNA microarray was used to screen for differentially expressed genes. A subset of selected genes was then tested using real-time RT-PCR. Logistic regression analysis was used to evaluate linear combinations of the biomarkers and receiver operating characteristic curve analysis was used to assess the discriminatory power of the combinations.ResultsGenes differentially expressed (3543 genes) between mild knee OA and control samples were identified through microarray analysis. Subsequent real-time RT-PCR verification identified six genes significantly down-regulated in mild OA: heat shock 90kDa protein 1, alpha; inhibitor of kappa light polypeptide gene enhancer in B-cells, kinase complex-associated protein; interleukin 13 receptor, alpha 1; laminin, gamma 1; platelet factor 4 (also known as chemokine (C-X-C motif) ligand 4) and tumor necrosis factor, alpha-induced protein 6. Logistic regression analysis identified linear combinations of nine genes – the above six genes, early growth response 1; alpha glucosidase II alpha subunit; and v-maf musculoaponeurotic fibrosarcoma oncogene homolog B (avian) – as discriminatory between subjects with mild OA and controls, with a sensitivity of 86% and specificity of 83% in a training set of 78 samples. The optimal biomarker combinations were then evaluated using a blind test set (67 subjects) which showed 72% sensitivity and 66% specificity.ConclusionsLinear combinations of blood RNA biomarkers offer a substantial improvement over currently available diagnostic tools for mild OA. Blood-derived RNA biomarkers may be of significant clinical value for the diagnosis of early, asymptomatic OA of the knee

    Observation of bright polariton solitons in a semiconductor microcavity

    Get PDF
    Microcavity polaritons are composite half-light half-matter quasi-particles, which have recently been demonstrated to exhibit rich physical properties, such as non-equilibrium Bose-Einstein condensation, parametric scattering and superfluidity. At the same time, polaritons have some important advantages over photons for information processing applications, since their excitonic component leads to weaker diffraction and stronger inter-particle interactions, implying, respectively, tighter localization and lower powers for nonlinear functionality. Here we present the first experimental observations of bright polariton solitons in a strongly coupled semiconductor microcavity. The polariton solitons are shown to be non-diffracting high density wavepackets, that are strongly localised in real space with a corresponding broad spectrum in momentum space. Unlike solitons known in other matter-wave systems such as Bose condensed ultracold atomic gases, they are non-equilibrium and rely on a balance between losses and external pumping. Microcavity polariton solitons are excited on picosecond timescales, and thus have significant benefits for ultrafast switching and transfer of information over their light only counterparts, semiconductor cavity lasers (VCSELs), which have only nanosecond response time

    Insulin Signaling Regulates Mitochondrial Function in Pancreatic β-Cells

    Get PDF
    Insulin/IGF-I signaling regulates the metabolism of most mammalian tissues including pancreatic islets. To dissect the mechanisms linking insulin signaling with mitochondrial function, we first identified a mitochondria-tethering complex in β-cells that included glucokinase (GK), and the pro-apoptotic protein, BADS. Mitochondria isolated from β-cells derived from β-cell specific insulin receptor knockout (βIRKO) mice exhibited reduced BADS, GK and protein kinase A in the complex, and attenuated function. Similar alterations were evident in islets from patients with type 2 diabetes. Decreased mitochondrial GK activity in βIRKOs could be explained, in part, by reduced expression and altered phosphorylation of BADS. The elevated phosphorylation of p70S6K and JNK1 was likely due to compensatory increase in IGF-1 receptor expression. Re-expression of insulin receptors in βIRKO cells partially restored the stoichiometry of the complex and mitochondrial function. These data indicate that insulin signaling regulates mitochondrial function and have implications for β-cell dysfunction in type 2 diabetes
    corecore