84 research outputs found
Room Temperature Nanoparticulate Interfacial Layers for Perovskite Solar Cells via solvothermal synthesis
We present a solvothermal synthetic route to produce monodispersed CuO
nanoparticles (NPs) in the range of 5-10 nm that can be used as hole selective
interfacial layer between indium tin oxide (ITO) and perovskite active layer
for p-i-n perovskite solar cells by a spin casting the dispersions at room
temperature. The bottom electrode interface modification provided by spherical
CuO-NPs at room temperature promotes the formation of high quality perovskite
photoactive layers with large crystal size and strong optical absorption.
Furthermore, it is shown that the nanoparticulate nature of the CuO hole
transporting interfacial layer can be used to improve light manipulation within
perovskite solar cell device structure. The corresponding p-i-n
CH3NH3PbI3-based solar cells show high Voc values of 1.09 V, which is
significantly higher compared to the Voc values obtained with conventional
PEDOT:PSS hole selective contact based perovskite solar cells
Intrinsic Defects and H Doping in WO3.
WO3 is widely used as industrial catalyst. Intrinsic and/or extrinsic defects can tune the electronic properties and extend applications to gas sensors and optoelectonics. However, H doping is a challenge to WO3, the relevant mechanisms being hardly understood. In this context, we investigate intrinsic defects and H doping by density functional theory and experiments. Formation energies are calculated to determine the lowest energy defect states. O vacancies turn out to be stable in O-poor environment, in agreement with X-ray photoelectron spectroscopy, and O-H bond formation of H interstitial defects is predicted and confirmed by Fourier transform infrared spectroscopy
Evaluation de la quantité des métaux lourds dans la décharge d’Agoè (Lomé- Togo): Cas du plomb, cadmium, cuivre, nickel et zinc
Depuis l’indépendance (1960), la population de la ville de Lomé à l’instar des grandes villes Africaines n’a cessé d’augmenter, engendrant ainsi une forte production des déchets. Ceci a entraîné la mise en place des décharges à l’exemple de celle d’Agoè pour une gestion pérenne des déchets. Ce travail a pour objectif d’évaluer la quantité des métaux lourds de la décharge finale des déchets urbains de la ville de Lomé. Les échantillons sont prélevés à la surface et à chaque mètre en profondeur en six points de la décharge finale. Les paramètres physico-chimiques (humidité, pH, matière organique) ont été déterminés sur ces échantillons de même que les teneurs de cinq métaux lourds (plomb, cadmium, nickel, cuivre et zinc). Le taux d’humidité des échantillons varie entre 17,65 et 67,64%. Le pH mesuré varie entre 7,48 et 8,45. La teneur en matière organique déterminée par la méthode de perte au feu varie entre 8,58 et 14,57%. Les teneurs moyennes des métaux lourds sont de 66,91 mg/kg pour le plomb ; 2,51 mg/kg pour le cadmium ; 6,10 mg/kg pour le nickel; 70,24 mg/kg pour le cuivre et 401,13 mg/kg pour le zinc. Le cadmium et le zinc ont des teneurs supérieures à la norme AFNOR NF U 44-041.Mots clés: Déchets, décharge, métaux lourds, polluant
Nanoscale processes during the interaction of aluminosilicate and carbonate mineral surfaces with acid mine drainage (AMD)
Depto. de Mineralogía y PetrologíaFac. de Ciencias GeológicasTRUEpu
Optimization of the hydrogen response characteristics of halogen-doped SnO2
The increasing demand for efficient sensing devices with facile low-cost fabrication has attracted a lot of scientific research effort in the recent years. In particular, the scientific community aims to develop new candidate materials suitable for energy-related devices, such as sensors and photovoltaics or clean energy applications such as hydrogen production. One of the most prominent methods to improve materials functionality and performance is doping key device component(s). This paper aims to examine in detail, both from a theoretical and an experimental point of view, the effect of halogen doping on the properties of tin dioxide (SnO2) and provide a deeper understanding on the atomic scale mechanisms with respect to their potential applications in sensors. Density Functional Theory (DFT) calculations are used to examine the defect processes, the electronic structure and the thermodynamical properties of halogen-doped SnO2. Calculations show that halogen doping reduces the oxide bandgap by creating gap states which agree well with our experimental data. The crystallinity and morphology of the samples is also altered. The synergy of these effects results in a significant improvement of the gas-sensing response. This work demonstrates for the first time a complete theoretical and experimental characterization of halogen-doped SnO2 and investigates the possible responsible mechanisms. Our results illustrate that halogen doping is a low-cost method that significantly enhances the room temperature response of SnO2
Inverted Perovskite Photovoltaics Using Flame Spray Pyrolysis Solution Based CuAlO2/Cu−O Hole-Selective Contact
We present the functionalization process of a conductive and transparent CuAlO2/Cu-O hole-transporting layer (HTL). The CuAlO2/Cu-O powders were developed by flame spray pyrolysis and their stabilized dispersions were treated by sonication and centrifugation methods. We show that when the supernatant part of the treated CuAlO2/Cu-O dispersions is used for the development of CuAlO2/Cu-O HTLs the corresponding inverted perovskite-based solar cells show improved functionality and power conversion efficiency of up to 16.3% with negligible hysteresis effect
NOTE : UTILISATION DE L'ORGE EN VERT PRODUITE HORS SOL POUR ALIMENTER DES LAPINS EN CROISSANCE EN SYSTEME FAMILIAL
[EN] Twenty, 42-day old crossbred rabbits (New-Zealand x
Californian) were divided in 2 groups and raised in wire mesh
cages involving 5 rabbits per cage. During the 7 weeks of the
experiment, rabbits received daily one of the following feeding
programmes : control ration (T) - 160 g pelleted concentrate per
animal, or experimental ration (E) - 80 g of the same concentrate
+ 400 g per animal of barley grass produced in 1 O days using a
hydroponic method. The crude fibre content of barley grass was 24.8% of dry mater (DM). Barley grass (whole plant parts) was
readily consumed by rabbits. lntake of barley grass represented
40% of the daily DM intake (34 to 45% according to the week).
Final live weight at 91 days was similar in the 2 groups : 2.47 and
2.38 kg for T and E. DM feed conversion ratio was numerically
lower in the E than in the T group: 4.09 vs 4.28. Carcass weight
and adiposity (6 rabbits slaughtered per group) were similar in
the 2 groups. Use of barley grass makes it possible to reduce
feed costs by 10% and also to increase independence of
breeders from pellets suppliers.[FR] Vingt lapins croisés (mére New Zélandaise, pére
Californien) agés de 42j ont été répartis en 2 lots de 1 O et logés dans
des cages collectives de 5 sujets. lls ont été alimentés pendant 7
semaines avec deux rations différentes : lot témoin (T) distribution
d'un aliment granulé concentré complet pour lapin en croissance, a
raison de 160 g I tete/jour et lot expérimental (E) distribution de 80 g
du meme aliment concentré granulé et de 400 g de verdure par
/tete/jour. La verdure était fournie par de l'orge cultivée en systéme
hydroponique pendant 1 O jours et contenait 24,8% de cellulose brute
par rapport a la matiére séche (MS). La verdure a été bien acceptée
par les lapins qui ont consommé facilement la plantule entiére (feuilles + racines). Son ingestion a représenté 40% de la
consommation moyenne quotidienne de MS des lapins du lot E (34 a
45% selon les semaines). Le poids vif final des deux groupe de
lapins était équivalent: 2,47 kg et 2,38 kg a 91 jours pour les lots T et
E. L'indice de consommation de la MS a été numériquement plus
faible pour le lot E : 4,09 vs 4,28. Le poids et l'adiposité des
carcasses (6 lapins par lot) n'ont pas été significativement affectés
par les traitements. L'utilisation de l'orge en vert permet de réduire
de 10% les coOts alimentaires et diminue la dépendance des
élevages par rapport aux fournisseurs d'aliments du bétail.Kriaa, S.; Bergaoui, R.; Kennou, S. (2001). NOTE : UTILISATION DE L'ORGE EN VERT PRODUITE HORS SOL POUR ALIMENTER DES LAPINS EN CROISSANCE EN SYSTEME FAMILIAL. World Rabbit Science. doi:10.4995/wrs.2001.462SWORD9
Resultat de croissance de lapins locaux tunisiens alimentes avec des rations contenant du fourrage vert ou ensile
National audienc
- …