1,019 research outputs found
The influence of primary Cu6Sn5 size on the shear impact properties of Sn-Cu/Cu BGA Joints
A method is presented to control the size of primary Cu6Sn5 in ball grid array (BGA) joints while keeping all other microstructural features near-constant, enabling a direct study of the size of primary Cu6Sn5 on impact properties. For Sn-2Cu/Cu BGA joints, it is shown that larger primary Cu6Sn5 particles have a clear negative effect on the shear impact properties. Macroscopic fracture occurred by a combination of the brittle fracture of embedded primary Cu6Sn5 rods and ductile fracture of the matrix βSn. Cleavage of the Cu6Sn5 rods occurred mostly along (0001) or perpendicular to (0001) with some crack deflection between the two. The deterioration of shear impact properties with increasing Cu6Sn5 size is attributed to (1) the larger microcracks introduced by the brittle fracture of larger embedded Cu6Sn5 crystals, and (2) the less numerous and more widely spaced rods when the Cu6Sn5 crystals are larger, which makes them poor strengtheners
Nucleation and twinning in tin droplet solidification on single crystal intermetallic compounds
βSn nucleation is a key step in the formation of microstructure in electronic solder joints. Here, the heterogeneous nucleation of βSn is studied in undercooled tin droplets spread on the facets of various intermetallic compounds (IMCs). Nucleation undercoolings are measured in solidifying droplets and are linked to orientation relationships (ORs) measured by electron backscatter diffraction (EBSD). Preferred ORs developed on all IMCs studied. For the more potent nucleants (αCoSn3, IrSn4, PtSn4, PdSn4) the ORs represent relatively simple atomic matches. ORs with lower potency nucleants (Cu6Sn5, Ag3Sn, Ni3Sn4) had more complex atomic matches that are explored based on matching of the closest packed atomic rows. βSn solidification twinning is shown to be more complex than has been reported previously: both nucleation on an IMC facet and cyclic twinning of that grain occurred in many droplets on Cu6Sn5, Ag3Sn, Ni3Sn4; in all twinned droplets the Sn twinning axis occurred along a direction on the IMC with the lowest linear atomic disregistry; and interrelated cyclic twins formed consisting of up to five rings of cyclic twins all related by shared Sn axes
Solidification behavior of intensively sheared hypoeutectic Al-Si alloy liquid
The official published version of this article can be found at the link below.The effect of the processing temperature on the microstructural and mechanical properties of Al-Si (hypoeutectic) alloy solidified from intensively sheared liquid metal has been investigated systematically. Intensive shearing gives a significant refinement in grain size and intermetallic particle size. It also is observed that the morphology of intermetallics, defect bands, and microscopic defects in high-pressure die cast components are affected by intensive shearing the liquid metal. We attempt to discuss the possible mechanism for these effects.Funded by the EPSRC
Recommended from our members
Balancing competing policy demands: the case of sustainable public sector food procurement.
A focus on market-based green growth strategies to pursue sustainability goals neglects the pursuit of understanding how human health is interwoven with the health of eco-systems to deliver sustainability goals. The article argues that clarifying the difference between green and sustainable public sector food procurement, with political continuity that supports and enables policymakers and practitioners to take an incremental approach to change, makes an important contribution to delivering more sustainable food systems and better public health nutrition. Five European case studies demonstrate the reality of devising and implementing innovative approaches to sustainable public sector food procurement and the effects of cultural and political framings. How legislation is enacted at the national level and interpreted at the local level is a key driver for sustainable procurement. Transition is dependent on political will and leadership and an infrastructure that can balance the economic, environmental and social drivers to effect change. The development of systems and indicators to measure change, reforms to EU directives on procurement, and the relationship between green growth strategies and sustainable diets are also discussed. The findings show the need to explore how consistent definitions for green public procurement and sustainable public procurement can be refined and standardized in order to support governments at all levels in reviewing and analyzing their current food procurement strategies and practices to improve sustainability
Interventions to Reduce Adult Nursing Turnover: A Systematic Review of Systematic Reviews.
Background: Nurse turnover is an issue of concern in health care systems internationally. Understanding which interventions are effective to reduce turnover rates is important to managers and health care organisations. Despite a plethora of reviews of such interventions, strength of evidence is hard to determine. Objective: We aimed to review literature on interventions to reduce turnover in nurses working in the adult health care services in developed economies. Method: We conducted an overview (systematic review of systematic reviews) using the Cochrane Database of Systematic Reviews, MEDLINE, EMBASE, Applied Social Sciences Index and Abstracts, CINAHL plus and SCOPUS and forward searching. We included reviews published between 1990 and January 2015 in English. We carried out parallel blinded selection, extraction of data and assessment of bias, using the Assessment of Multiple Systematic Reviews. We carried out a narrative synthesis. Results: Despite the large body of published reviews, only seven reviews met the inclusion criteria. These provide moderate quality review evidence, albeit from poorly controlled primary studies. They provide evidence of effect of a small number of interventions which decrease turnover or increase retention of nurses, these being preceptorship of new graduates and leadership for group cohesion. Conclusion: We highlight that a large body of reviews does not equate with a large body of high quality evidence. Agreement as to the measures and terminology to be used together with well-designed, funded primary research to provide robust evidence for nurse and human resource managers to base their nurse retention strategies on is urgently required
Recommended from our members
Tripled critical current in racetrack coils made of Bi-2212 Rutherford cables with overpressure processing and leakage control
We fabricated three racetrack coils (RC1, RC2, and RC3) from Bi-2212 Rutherford cables (17-strand, thickness × width = 1.44 mm × 7.8 mm, strand diameter = 0.8 mm) and applied overpressure processing heat treatment (OPHT). The quench currents of RC1 and RC2 reached 5268 A and 5781 A, respectively, despite them still, surprisingly, exhibiting some Bi-2212 leakage to the surface. After removing most of the leakages using a simple-to-implement insulation scheme, the quench current of RC3 improved to 6485 A, which is about three times the average quench current of a dozen racetrack coils that had been fabricated and reacted using the conventional 1 bar heat treatment. The results confirm the effectiveness of the OPHT technology and the new leakage control scheme for coils made from Bi-2212 Rutherford cables. Coils exhibited an increased quench current with increasing the current ramp rate from 5 to 200 A s ; they were quite stable against point and transient disturbances, and were capable of adsorbing persistent Joule heating at ∼80 mW for >15 s before quenching. These behaviors are different from Nb-Ti and Nb Sn accelerator magnets. Overall, our results provide a critical evaluation and verification of Bi-2212 wire and magnet technologies (wire, insulation, heat treatment, coil fabrication, and coil operation), reveal crucial new stability features of Bi-2212 magnets, and demonstrate technological options for it to become a practical high-field magnet technology. -1
Evaluating the impact of DREAMS on HIV incidence among adolescent girls and young women: A population-based cohort study in Kenya and South Africa
Background: Through a multisectoral approach, the DREAMS Partnership aimed to reduce HIV incidence among adolescent girls and young women (AGYW) by 40% over 2 years in high-burden districts across sub-Saharan Africa. DREAMS promotes a combination package of evidence-based interventions to reduce individual, family, partner, and community-based drivers of young women’s heightened HIV risk. We evaluated the impact of DREAMS on HIV incidence among AGYW and young men in 2 settings. // Methods and findings: We directly estimated HIV incidence rates among open population-based cohorts participating in demographic and HIV serological surveys from 2006 to 2018 annually in uMkhanyakude (KwaZulu-Natal, South Africa) and over 6 rounds from 2010 to 2019 in Gem (Siaya, Kenya). We compared HIV incidence among AGYW aged 15 to 24 years before DREAMS and up to 3 years after DREAMS implementation began in 2016. We investigated the timing of any change in HIV incidence and whether the rate of any change accelerated during DREAMS implementation. Comparable analyses were also conducted for young men (20 to 29/34 years).
In uMkhanyakude, between 5,000 and 6,000 AGYW were eligible for the serological survey each year, an average of 85% were contacted, and consent rates varied from 37% to 67%. During 26,395 person-years (py), HIV incidence was lower during DREAMS implementation (2016 to 2018) than in the previous 5-year period among 15- to 19-year-old females (4.5 new infections per 100 py as compared with 2.8; age-adjusted rate ratio (aRR) = 0.62, 95% confidence interval [CI] 0.48 to 0.82), and lower among 20- to 24-year-olds (7.1/100 py as compared with 5.8; aRR = 0.82, 95% CI 0.65 to 1.04). Declines preceded DREAMS introduction, beginning from 2012 to 2013 among the younger and 2014 for the older women, with no evidence of more rapid decline during DREAMS implementation. In Gem, between 8,515 and 11,428 AGYW were eligible each survey round, an average of 34% were contacted and offered an HIV test, and consent rates ranged from 84% to 99%. During 10,382 py, declines in HIV incidence among 15- to 19-year-olds began before DREAMS and did not change after DREAMS introduction. Among 20- to 24-year-olds in Gem, HIV incidence estimates were lower during DREAMS implementation (0.64/100 py) compared with the pre-DREAMS period (0.94/100 py), with no statistical evidence of a decline (aRR = 0.69, 95% CI 0.53 to 2.18). Among young men, declines in HIV incidence were greater than those observed among AGYW and also began prior to DREAMS investments. Study limitations include low study power in Kenya and the introduction of other interventions such as universal treatment for HIV during the study period. // Conclusions: Substantial declines in HIV incidence among AGYW were observed, but most began before DREAMS introduction and did not accelerate in the first 3 years of DREAMS implementation. Like the declines observed among young men, they are likely driven by earlier and ongoing investments in HIV testing and treatment. Longer-term implementation and evaluation are needed to assess the impact of such a complex HIV prevention intervention and to help accelerate reductions in HIV incidence among young women
Quench Performance and Field Quality Measurements of the First LHC low- Quadrupole Model
As part of the LHC magnet development program, CERN in collaboration with Oxford Instruments has designed, built and tested a one metre model of a 70 mm aperture low-beta quadrupole. The magnet features a four layer coil, and is designed for 250 T/m at 1.9 K. We review the results of the magnet training and quench propagation studies performed at 4.3 K and 1.9 K, and report on the magnetic field measurements
The Hydrogen Atom in Combined Electric and Magnetic Fields with Arbitrary Mutual Orientations
For the hydrogen atom in combined magnetic and electric fields we investigate
the dependence of the quantum spectra, classical dynamics, and statistical
distributions of energy levels on the mutual orientation of the two external
fields. Resonance energies and oscillator strengths are obtained by exact
diagonalization of the Hamiltonian in a complete basis set, even far above the
ionization threshold. At high excitation energies around the Stark saddle point
the eigenenergies exhibit strong level repulsions when the angle between the
fields is varied. The large avoided crossings occur between states with the
same approximately conserved principal quantum number, n, and this
intramanifold mixing of states cannot be explained, not even qualitatively, by
conventional perturbation theory. However, it is well reproduced by an extended
perturbation theory which takes into account all couplings between the angular
momentum and Runge-Lenz vector. The large avoided crossings are interpreted as
a quantum manifestation of classical intramanifold chaos. This interpretation
is supported by both classical Poincar\'e surfaces of section, which reveal a
mixed regular-chaotic intramanifold dynamics, and the statistical analysis of
nearest-neighbor-spacingComment: two-column version, 10 pages, REVTeX, 10 figures, uuencoded,
submitted to Rhys. Rev.
Recommended from our members
Synchrotron radiography studies of shear-induced dilation in semi-solid Al alloys and steels
An improved understanding of the response of solidifying microstructures to load is required to further minimize casting defects and optimize casting processes. This article overviews synchrotron radiography studies that directly measure the micromechanics of semisolid alloy deformation in a thin sample direct-shear cell. It is shown that shear-induced dilation (also known as Reynolds’ dilatancy) occurs in semisolid alloys with morphologies ranging from equiaxed-dendritic to globular, at solid fractions from the dendrite coherency point to ~90% solid, and it occurs in both Al alloys and carbon steels. Discrete-element method simulations that treat solidifying microstructures as granular materials are then used to explore the origins of dilatancy in semisolid alloys
- …