Fluorine in a Carbon-Enhanced Metal-Poor Star

The fluorine abundance of the Carbon-Enhanced Metal-Poor (CEMP) star HE 1305+0132 has been derived by analysis of the molecular HF (1-0) R9 line at 2.3357 microns in a high-resolution (R = 50,000) spectrum obtained with the Phoenix spectrometer and Gemini-South telescope. Our abundance analysis makes use of a CNO-enhanced ATLAS12 model atmosphere characterized by a metallicity and CNO enhancements determined utilizing medium-resolution (R = 3,000) optical and near-IR spectra. The effective iron abundance is found to be [Fe/H] = -2.5, making HE 1305+0132 the most Fe-deficient star, by more than an order of magnitude, for which the abundance of fluorine has been measured. Using spectral synthesis, we derive a super-solar fluorine abundance of A(19F) = 4.96 +/- 0.21, corresponding to a relative abundance of [F/Fe] = 2.90. A single line of the Phillips C_2 system is identified in our Phoenix spectrum, and along with multiple lines of the first-overtone vibration-rotation CO (3-1) band head, C and O abundances of A(12C) = 8.57 +/- 0.11 and A(16O) = 7.04 +/- 0.14 are derived. We consider the striking fluorine overabundance in the framework of the nucleosynthetic processes thought to be responsible for the C-enhancement of CEMP stars and conclude that the atmosphere of HE 1305+0132 was polluted via mass transfer by a primary companion during its asymptotic giant branch phase. This is the first study of fluorine in a CEMP star, and it demonstrates that this rare nuclide can be a key diagnostic of nucleosynthetic processes in the early Galaxy.Comment: 13 pages, 3 figures; Accepted for publication in ApJ Letter

PEPSI deep spectra. III. A chemical analysis of the ancient planet-host star Kepler-444

We obtained an LBT/PEPSI spectrum with very high resolution and high signal-to-noise ratio (S/N) of the K0V host Kepler-444, which is known to host 5 sub-Earth size rocky planets. The spectrum has a resolution of R=250,000, a continuous wavelength coverage from 4230 to 9120A, and S/N between 150 and 550:1 (blue to red). We performed a detailed chemical analysis to determine the photospheric abundances of 18 chemical elements, in order to use the abundances to place constraints on the bulk composition of the five rocky planets. Our spectral analysis employs the equivalent width method for most of our spectral lines, but we used spectral synthesis to fit a small number of lines that require special care. In both cases, we derived our abundances using the MOOG spectral analysis package and Kurucz model atmospheres. We find no correlation between elemental abundance and condensation temperature among the refractory elements. In addition, using our spectroscopic stellar parameters and isochrone fitting, we find an age of 10+/-1.5 Gyr, which is consistent with the asteroseismic age of 11+/-1 Gyr. Finally, from the photospheric abundances of Mg, Si, and Fe, we estimate that the typical Fe-core mass fraction for the rocky planets in the Kepler-444 system is approximately 24 per cent. If our estimate of the Fe-core mass fraction is confirmed by more detailed modeling of the disk chemistry and simulations of planet formation and evolution in the Kepler-444 system, then this would suggest that rocky planets in more metal-poor and alpha-enhanced systems may tend to be less dense than their counterparts of comparable size in more metal-rich systems.Comment: in press, 11 pages, 3 figures, data available from pepsi.aip.d

Li I and K I Scatter in Cool Pleiades Dwarfs

We utilize high-resolution (R~60,000), high S/N (~100) spectroscopy of 17 cool Pleiades dwarfs to examine the confounding star-to-star scatter in the 6707 Li I line strengths in this young cluster. Our Pleiads, selected for their small projected rotational velocity and modest chromospheric emission, evince substantial scatter in the linestrengths of 6707 Li I feature that is absent in the 7699 K I resonance line. The Li I scatter is not correlated with that in the high-excitation 7774 O I feature, and the magnitude of the former is greater than the latter despite the larger temperature sensitivity of the O I feature. These results suggest that systematic errors in linestrength measurements due to blending, color (or color-based T_eff) errors, or line formation effects related to an overlying chromosphere are not the principal source of Li I scatter in our stars. There do exist analytic spot models that can produce the observed Li scatter without introducing scatter in the K I line strengths or the color-magnitude diagram. However, these models predict factor of >3 differences in abundances derived from the subordinate 6104 and resonance 6707 Li I features; we find no difference in the abundances determined from these two features. These analytic spot models also predict CN line strengths significantly larger than we observe in our spectra. The simplest explanation of the Li, K, CN, and photometric data is that there must be a real abundance component to the Pleiades Li dispersion. We suggest that this real abundance component is the manifestation of relic differences in erstwhile pre-main-sequence Li burning caused by effects of surface activity on stellar structure. We discuss observational predictions of these effects.Comment: 35 pages, 7 figures; accepted by Ap

Measurement of Stochastic Entropy Production

Using fluorescence spectroscopy we directly measure entropy production of a single two-level system realized experimentally as an optically driven defect center in diamond. We exploit a recent suggestion to define entropy on the level of a single stochastic trajectory (Seifert, Phys. Rev. Lett. {\bf 95}, 040602 (2005)). Entropy production can then be split into one of the system itself and one of the surrounding medium. We demonstrate that the total entropy production obeys various exact relations for finite time trajectories.Comment: Phys. Rev. Lett., in pres

Metallicities of Planet Hosting Stars: A Sample of Giants and Subgiants

This work presents a homogeneous derivation of atmospheric parameters and iron abundances for a sample of giant and subgiant stars which host giant planets, as well as a control sample of subgiant stars not known to host giant planets. The analysis is done using the same technique as for our previous analysis of a large sample of planet-hosting and control sample dwarf stars. A comparison between the distributions of [Fe/H] in planet-hosting main-sequence stars, subgiants, and giants within these samples finds that the main-sequence stars and subgiants have the same mean metallicity of \simeq +0.11 dex, while the giant sample is typically more metal poor, having an average metallicity of = -0.06 dex. The fact that the subgiants have the same average metallicities as the dwarfs indicates that significant accretion of solid metal-rich material onto the planet-hosting stars has not taken place, as such material would be diluted in the evolution from dwarf to subgiant. The lower metallicity found for the planet-hosting giant stars in comparison with the planet-hosting dwarfs and subgiants is interpreted as being related to the underlying stellar mass, with giants having larger masses and thus, on average larger-mass protoplanetary disks. In core accretion models of planet formation, larger disk masses can contain the critical amount of metals necessary to form giant planets even at lower metallicities.Comment: 38 pages, 7 figures, 4 tables, accepted for publication in Ap

Experimental study of flow deflectors designed to alleviate ground winds induced by exhaust of 80-by 120-foot wind tunnel

An experimental study directed at finding a deflector ramp that will reduce to an acceptable level the ground winds under the exhaust jet of the 80 by 120 Foot Wind Tunnel at NASA Ames Center is described. A one-fifieth scale model of the full-scale facility was used to investigate how the jet flow field was modified by the various design parameters of the ramp. It was concluded that the ground winds were alleviated sufficiently by a ramp with end plates located next to the wind tunnel building along the ground edge of the exhaust opening. At full scale, the ramp should have a slant length of 7.62 m (25 ft) or more, and would be elevated at about 45 degrees to the ground plane. The material should have holes less than 15.2 (6 in) in diameter distributed uniformly over its surface to produce a porosity of about 30%

The Cartilage-Sparing Versus the Cartilage-Cutting Technique: A Retrospective Quality Control Comparison of the Francesconi and Converse Otoplasties

From a total of 281 patients with protruding ears who underwent a bilateral otoplasty between 1990 and 2001, a group of 28 (10%) was selected for a retrospective quality control study. The goal was to compare two methods of otoplasty, the Francesconi, a cartilage-sparing technique, and the Converse, a cartilage-cutting technique, in terms of objectively measurable and subjectively discernable differences in results. Objective parameters included measurement of the three cephaloauricular distances and the conchoscapal angle. An independent plastic surgeon performed the evaluation by means of a systematic evaluation system for rating cosmetic surgical procedures and a 5-point visual analog scale for rating satisfaction. The patients' subjective rate of satisfaction also was investigated using the 5-point scale. The mean medial and inferior cephaloauricular distances were significantly smaller in the Francesconi group. The concoscaphal angle was 90°, or less in all the patients of the Francesconi group, but more than 90° in eight patients (57%) of the Converse group (p = 0.041). Accordingly, the independent surgeon found adequate correction of protrusion in 86% of the Francesconi group and 50% of the Converse group (p = 0.050). His satisfaction rate was significantly in favor of the Francesconi technique (p = 0.006). Not unexpectedly, the patients' satisfaction rate was comparably high in both groups, and there was no statistical difference between them. In conclusion, the quality control led to a clear preference of the Francesconi over the Converse otoplasty. In addition, the assessment of the postoperative results with the systematic evaluation system offered an excellent information base by which to judge the results of otoplasty. Consequent use of this evaluation system will lead to progress in the surgical procedur

Soil management qualification under no-till system in Center Southern Brazil.

No-tillage (NT) system comprises a set of technological processes aimed at exploring farming systems while promoting soil conservation management. Its main principles are: leaving soil undisturbed except for seeding in the drills or rows, the maintenance of permanent soil cover, the diversifi cation of crops by rotation or crop consortium, the adoption of joined harvesting-seeding process to reduce the time gap between operations. Although the NT system was developed to reduce erosion and to promote soil quality, there are several inadequate practices that have been applied in areas where cropping is misnamed as "No-tillage" system, e.g., the use of monoculture, the terraces misuse or elimination, the absence of contour plowing and others that are incompatible with the conservation principles and that lead to losses in soil and water quality and in local biodiversity. In order to improve the soil management in NT areas, a network research program coordinated by Embrapa Soils and supported by Itaipu Binacional has been studying no-tillage in twelve watersheds of six regions in Center-Southern Brazil since 2014. The network is developing indicators to assess soil management and its environmental eff ects at property and watershed scales. The program includes: participatory processes of self-evaluation, adjustment and certification by farmers; monitoring farming systems and small watersheds parameters (soil and plant) in twelve locations; long term experiments in six study-sites; and technology transfer in reference areas for training in NT systems. As preliminary results, the selection of monitoring watersheds has been carried out and the communication process has promoted eff ective participation of farmers in Paranapanema-SP, Londrina-PR, Toledo- PR, Maracaju-MS, Rio Verde-GO and Passo Fundo-RS. In addition, the establishment of local and international institutions network started up actions to improve soil management though no-tillage system.The monitoring approach adopts complementary methods to assess the farming system: IQP which is the No Tillage Participatory Quality Index developed by the Brazilian Federation of No-Till Farms and Irrigation (FEBRAPDP); DRES (Rapid Diagnostic of Soil Structure) to asses management structural quality in areas under NT; and Beta (β) index to classify watershed management based on hydrometeorological data, turbidity time series and sedimentary data set from monitored watersheds