Finite element simulation of the braiding process

Braiding is one of the most common technique employed for the manufacture of fabrics and ropes. It is also commonly used to produce near-net shaped preforms for advanced fibre reinforced composites. This paper presents an explicit finite element approach to create and simulate the braiding process for the virtual manufacture of 2D braids. The process starts from the definition of an analytical function which describes the movement of the carriers on a braiding track plate. Models of idealised Maypole-type braiding machines are built and used to shape virtual yarns into braids. This procedure can be used in a parameter control fashion, to optimise or to create virtual braided structures, which can serve as input for other structural analyses. It is emphasised that multiple cylinders are required for the modelling of a multifilament yarn to achieve better correlation with the experimental results. A parametric study is presented to investigate the effect of the number of virtual cylinders to represent a real yarn and the shape of the final braid. Excellent correlation was found between the virtual models and the experimental results when comparing the braid angle and yarn width

Experimental investigation of the mechanical properties of dry microbraids and microbraid reinforced polymer composites

AbstractThis paper presents a comprehensive series of mechanical tests performed on two high performance polymeric fibres, microbraids and microbraid reinforced polymer composites (mBRPC). Quasi-static tests were performed on the raw materials and the effect of different gauge lengths and strain rates investigated. Then, microbraids having sub-millimetre diameters were manufactured from the raw yarns using a Maypole-type braiding machine. The effects of different braid architectures, number of braided yarns and bias angles were assessed through a series of tensile tests on dry microbraids. A novel and unique manufacturing method of aligning microbraids in a unidirectional fashion via robotised filament winding was developed to manufacture microbraid reinforced polymer composites (mBRPC). Quasi-static tensile tests performed on mBRPC showed improved mechanical properties, for certain architectures, with respect to those noted for unidirectional composites manufactured using same technique

Resident training in urology: Bipolar transurethral resection of the prostate - a safe method in learning endoscopic surgical procedure

Introduction: Modern medicine uses increasingly innovative techniques that require more and more capabilities for acquisition. In the urological department is increasing the presence of patients with lower urinary tract symptoms (LUTS) and transurethral resection of the prostate (TURP) is the standard of care in their surgical treatment. We report our surgical experience and learning curve of using bipolar plasmakinetic devices in the training of urological residents to benign prostatic hyperplasia (BPH) treatment. Materials and Methods: 80 patients with benign prostatic enlargement due to BPH were enrolled in the study. TURP has been performed by three urological residents and by an expe- rienced urologist. Patients were evaluated before and 6 months after the endoscopic bipolar plasmakinetic resection using the International Prostate Symptom Score (IPSS), maximum uri- nary flow rate (Qmax), postvoid residual urine (PVR) and prostate specific antigen (PSA). Results: Overall 60 procedures were performed, 18 PlasmaKinetic (PK)-TURP procedures were completed by the three residents. In the other 42 cases the procedures were completed by the experienced urologist. In eight cases there was a capsular perforation and the experienced urol- ogist replaced the resident to complete the resection. No complications have been reported in the procedures completed by the senior urologist. All complications caused by the residents were man- aged intraoperatively without changing the course of the procedure. Statistical differences were observed regarding IPSS, quality of life (QoL), and PVR at 6-month follow-up when procedures completed by urological residents were compared to those completed by the senior urologist. Conclusion: Bipolar device represents appropriate tools to acquire endoscopic skills. It is safe and it can be used at the first experience of BPH treatment by a resident who has not previ- ously approached this endoscopic surgical procedure

Understanding the thickness effect on the tensile strength property of Dyneema®HB26 laminates

In this study, an experimental and numerical investigation is presented on the effect of thickness and test rate within the pseudo static regime on the tensile properties of Dyneema®HB26 laminates. A detailed experimental presentation on the tensile testing of different thickness is presented and highlights the commonly seen observation that the tensile strength of a laminate reduces as a function of the specimen thickness. To understand these experimental observations, a constitutive material model of the individual macro fibril is developed and applied to modelling the fibre and upscaling to the laminate. The modelling strategy is implemented into ls-dyna and used to perform a parameter study on the specimen geometries used in the experimental study. The model assumes that the fibril strength is a function of the amorphous volume within the fibre and hence fibril. It can be observed that the experimental behaviour can be simulated by modelling the interface between laminate plies and the fibril, and hence fibre failure. The weak interfaces from the fibril to the laminate scale make the testing of fibres and laminates very difficult. Hence, it is proposed that the intrinsic fibril strength should be used as a measure of strength, and the fundamental strength is determined through numerical studies

Self-heating effect on ultra-high molecular weight polyethylene fibres and composites

This paper investigates the self-heating effect observed during testing ultra-high molecular weight polyethylene (UHMWPE) fibres and their composites, in particular Dyneema® SK76 fibres and Dyneema® HB26 laminates. Monotonic and cyclic tests were carried out at strain rates between 0.00833 s−1 and 250 s−1, frequencies up to 20 Hz, and different mean stress, amplitude stress and stress ratios to evaluate the self-heating effect developing in the materials. Measurements of the specimen’s temperature were carried out using a thermochromic liquid crystal paint and an infrared sensor. Experimental results showed that the temperature increased during fibre testing by as much as 13.2 ± 0.2 °C and, even though the maximum temperature was below the melting temperature of the material, melting was observed. Tension-tension cyclic tests showed that the fatigue life of the coupon specimens significantly depended on the testing conditions. In some cases, the measured temperature was as high as 102 ± 1 °C. Depending on the fatigue parameters, the laminates showed two different types of failure modes: mechanical or thermal. Hence, it is important to take into account self-heating effects when designing engineering parts reinforced with UHMWPE fibres

Raloxifene reduces urokinase-type plasminogen activator-dependent proliferation of synoviocytes from patients with rheumatoid arthritis

Extracellular fibrinolysis, controlled by the membrane-bound fibrinolytic system, is involved in cartilage damage and rheumatoid arthritis (RA) synovitis. Estrogen status and metabolism seem to be impaired in RA, and synoviocytes show receptors for estrogens. Our aims in this study were to evaluate in healthy and RA synoviocytes the effects of Raloxifene (RAL), a selective estrogen receptor modulator (SERM), on: proliferation; the components of the fibrinolytic system; and chemoinvasion. The effects of RAL were studied in vitro on synoviocytes from four RA patients and four controls. Proliferation was evaluated as cell number increase, and synoviocytes were treated with 0.5 μM and 1 μM RAL with and without urokinase-plasminogen activator (u-PA) and anti-u-PA/anti-u-PA receptor (u-PAR) antibodies. Fibrinolytic system components (u-PA, u-PAR and plasminogen activator inhibitor (PAI)-1) were assayed by ELISA with cells treated with 0.5 μM and 1 μM RAL for 48 h. u-PA activity was evaluated by zymography and a direct fibrinolytic assay. U-PAR/cell and its saturation were studied by radioiodination of u-PA and a u-PA binding assay. Chemoinvasion was measured using the Boyden chamber invasion assay. u-PA induced proliferation of RA synoviocytes was blocked by RAL (p < 0.05) and antagonized by antibodies alone. The inhibitory effect of RAL was not additive with u-PA/u-PAR antagonism. RA synoviocytes treated with RAL showed, compared to basal, higher levels of PAI-1 (10.75 ± 0.26 versus 5.5 ± 0.1 μg/10(6 )cells, respectively; p < 0.01), lower levels of u-PA (1.04 ± 0.05 versus 3.1 ± 0.4 ng/10(6 )cells, respectively; p < 0.001), and lower levels of u-PAR (11.28 ± 0.22 versus 23.6 ± 0.1 ng/10(6 )cells, respectively; p < 0.001). RAL also significantly inhibited u-PA-induced migration. Similar effects were also shown, at least partially, in controls. RAL exerts anti-proliferative and anti-invasive effects on synoviocytes, mainly modulating u-PAR and, to a lesser extent, u-PA and PAI-1 levels, and inhibiting cell migration and proliferation

Tandem chemiluminescence-flow injection analysis for dimethoate determination

This work was supported by the Ministry of Education and Science of Spain (Project CTM2006-11991) and FEDER funds.Catalá Icardo, M.; López Paz, JL.; Choves Barón, C. (2010). Tandem chemiluminescence-flow injection analysis for dimethoate determination. Luminescence. 25:235-236. https://doi.org/10.1002/bio.1217S2352362

In systemic sclerosis, anxiety and depression assessed by hospital anxiety depression scale are independently associated with disability and psychological factors.

Background. Anxious and depressive symptoms are frequent in Systemic Sclerosis (SSc). Our objective is to assess their prevalence and association with district and global disability and psychological variables. Methods. 119 SSc patients were assessed by Hospital Anxiety Depression Scale (HADS). Clinical depression and anxiety were defined for HADS score cutoff ≥8. Patients were assessed for psychological symptoms (RSES, COPE-NIV), hand (HAMIS, CHFDS, fist closure, and hand opening) and face disability (MHISS, mouth opening), global disability, and fatigue (HAQ, FACIT). Results. Both depression and anxiety in SSc are 36%. Depressive patients with comorbid anxiety have higher HADS-D score than patients with depression only (). HADS-A and -D are positively correlated with global disability, hands and mouth disability, fatigue, self-esteem and avoidance coping strategy, and, only HADS-A, also with social support (). By multiple regression, HADS-D is independently associated with FACIT-F (), RSES (), and MHISS total score (), together explaining 50% of variance. HADS-A is independently associated with RSES (), COPE-NIV SA (), COPE-NIV SS (), FACIT-F (), and MHISS mouth opening (), explaining 41% of variance. Conclusions. In SSc depression and anxiety correlate to local and global disabilities and psychological characteristics. Depressive patients with comorbid anxiety have higher level of depressive symptoms