Comportamiento de yautía [Xanthosoma sagittifolium (L.) Schott] derivada de cultivo de tejido

To respond to questions raised about field adaptability of tissue culture derived (TC) cocoyam, a study was conducted to compare TC cocoyam with cocoyam from non-tissue culture (NTC), i.e., vegetatively propagated. Throughout the vegetative cycle, TC plants out performed NTC plants in terms of plant vigor and average leaf number. In general, TC plants acclimatized in the greenhouse produced significantly more suckers than NTC plants, regardless of the period within the growing season. In the trial, the average number of cormels per plant varied from 6.66 to 12.44. TC plants acclimatized for two months (h1), yielded higher than the other TC and TCN plants. The total weight (weight of cormels and corms) of TC plants of h1 was significantly higher than in all other treatments. This finding suggests the importance of the acclimatization process in preparing TC derived plantlets for field conditions.Para responder a preguntas sobre la adaptabilidad al campo de la yautía derivada de cultivo de tejido (CT), se comparó ésta con ia yautía no derivada de cultivo de tejido (NCT). Durante el ciclo vegetativo, las plantas CT superaron a las plantas NCT en términos de vigor de la planta y del número promedio de hojas. Por lo general, las plantas CT aclimatadas en el invernadero produjeron significativamente más hijuelos que las plantas NCT, sin importar la etapa de crecimiento de !a planta. El número promedio de cormelos por planta varió de 6.66 a 12.44. Las plantas CT aclimatadas por dos meses (h1) produjeron más cormelos que las otras plantas CT y que las plantas NCT. El peso total (peso de los cormelos y los cormos) de las plantas CT en h1  fue significativamente mayor que el peso total obtenido en los otros tratamientos. Este hallazgo sugiere la importancia del proceso de aclimatización en la preparación de las plantas derivadas de cultivo de tejido para las condiciones del campo

Validation of a cost-effective alternative for a radiochromatography method to be used in a developing country

INTRODUCTION: The radiochemical purity (RCP) of technetium-99m labelled radiopharmaceuticals (RP) is important to ensure optimal scintigraphic image quality. In low-income settings, it may not be possible to use compendial analytical methods or expensive equipment for radiochemical purity analysis. All radiochemical analysis methods should however be validated against compendial or otherwise proven methods. To ensure the efficacy of RP prepared at Yaoundé General Hospital (YGH) Cameroon, this study cross-validated a cost-effective routine chromatographic method using a simple survey meter technique. A GMP-compliant method used at the University Medical Center Groningen (UMCG), the Netherlands was used as the comparator. METHODS: Sestamibi, HMDP and DMSA kits currently used at YGH were reconstituted at UMCG with about 2000 MBq of freshly eluted sodium pertechnetate as described by the manufacturer, and spiked with eluate of the same generator to obtain a range of impurity concentrations. Samples of technetium-99m RP were spotted on 1 × 10 cm iTLC-SG strips and developed in appropriate mobile phases. Each strip was first scanned on the chromatogram-scanner used at the UMCG (standard method), and immediately thereafter the strip was cut in two pieces and radioactivity from each portion was counted with a small survey meter from YGH. The percentage RCP for each TLC strip was calculated using both counting methods. Internationally recommended validation parameters and acceptance criteria were used. Student's paired t-test or ANOVA were used with 'no significant difference' designated at a 95% confidence-interval (P ≥ 0.05). Linearity of the survey meter was determined for Tc-99m. Readings obtained with the survey meter were also plotted against the scanner results. RESULTS AND DISCUSSION: The proposed method proved to be accurate (CV of mean RCP  0.05). LOD and LOQ were determined for the survey meter. Specificity depends on chemical separation. As we were validating the suitability of a method to quantify radioactivity, specificity was not included in the validation parameters. CONCLUSION: The proposed method compared well with the standard method and is suitable as a reliable low cost method for limited resource settings

Optimization of micro and nanoimprint de-embossing by elastic fracture modelling

A semi-analytical model is presented for the de-embossing phase of the nanoimprint patterning process. The model is based on established principles of elastic fracture mechanics as developed for fibre-bridged cracking in composites. De-embossing is idealized as a steady-state fracture process, which enables the energy change to be considered by reference to a unit cell of a cylindrical polymer post, de-embossing from an axisymmetric stamp. The model provides predictions of the achievable limits for de-embossing as a function of key geometrical variables such as feature size, area ratio and aspect ratio and material properties such as interfacial adhesion, shear strength, polymer yield strength and the ratio of the elastic moduli of the polymer and the stamp. Process 'maps' have been created showing de-embossing limits. A strong dependence of the achievable aspect ratio on the pattern area ratio and the interfacial shear stress is seen. For polymer yield stresses similar to that of PMMA, the critical interfacial strain energy release rate has little effect on de-embossing. Large area and aspect ratios are predicted to be achievable by keeping the ratio of polymer and stamp Young's moduli between 0.015 and 2.5. The model provides key insights into the physical origins of previously observed limits on the achievable aspect ratios and area ratios achieved by imprint patternin

Understanding Silicate Deposit Variability and its Implications for Evaluating TBCs and EBCs

Please click Additional Files below to see the full abstract

Is there a relationship between pain intensity and postural sway in patients with non-specific low back pain?

Background Increased center of pressure excursions are well documented in patients suffering from non-specific low back pain, whereby the altered postural sway includes both higher mean sway velocities and larger sway area. No investigation has been conducted to evaluate a relationship between pain intensity and postural sway in adults (aged 50 or less) with non-specific low back pain. Methods Seventy-seven patients with non-specific low back pain and a matching number of healthy controls were enrolled. Center of pressure parameters were measured by three static bipedal standing tasks of 90sec duration with eyes closed in narrow stance on a firm surface. The perceived pain intensity was assessed by a numeric rating scale (NRS-11), an equal number of patients (n=11) was enrolled per pain score. Results Generally, our results confirmed increased postural instability in pain sufferers compared to healthy controls. In addition, regression analysis revealed a significant and linear increase in postural sway with higher pain ratings for all included COP parameters. Statistically significant changes in mean sway velocity in antero-posterior and medio lateral direction and sway area were reached with an incremental change in NRS scores of two to three points. Conclusions COP mean velocity and sway area are closely related to self-reported pain scores. This relationship may be of clinical use as an objective monitoring tool for patients under treatment or rehabilitation

Numerical study on load-bearing capabilities of beam-like lattice structures with three different unit cells

The design and analysis of lattice structures manufactured using Additive Manufacturing (AM) technique is a new approach to create lightweight high-strength components. However, it is difficult for engineers to choose the proper unit cell for a certain function structure and loading case. In this paper, three beam-like lattice structures with triangular prism, square prism and hexagonal prism were designed, manufactured by SLM process using AlSi10Mg and tested. The mechanical performances of lattice structures with equal relative density, equal base area and height, and equal length for all unit cells were conducted by Finite Element Analysis (FEA). It was found that effective Young’s modulus is proportional to relative density, but with different affecting levels. When the lattice structures are designed with the same relative density or the same side lengths, the effective Young’s modulus of lattice structure with triangular prism exhibits the maximum value for both cases. When the lattice structures are designed with the same base areas for all unit cells, the effective Young’s modulus of lattice structures with square prism presents the maximum. FEA results also show that the maximum stress of lattice structures with triangular prisms in each comparison is at the lowest level and the stiffness-to-mass ratio remains at the maximum value, showing the overwhelming advantages in terms of mechanical strength. The excellent agreements between numerical results and experimental tests reveal the validity of FEA methods applied. The results in this work provide an explicit guideline to fabricate beam-like lattice structures with the best tensile and bending capabilities

Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness

Acknowledgements H.N.G.W. is grateful for support for this work by the ONR (grant number N00014-15-1-2933), managed by D. Shifler, and the DARPA MCMA programme (grant number W91CRB-10-1-005), managed by J. Goldwasser.Peer reviewedPostprintPostprintPostprintPostprin

Silencing Agrobacterium oncogenes in transgenic grapevine results in strain-specific crown gall resistance

Crown gall disease of grapevine induced by Agrobacterium vitis or Agrobacterium tumefaciens causes serious economic losses in viticulture. To establish crown gall-resistant lines, somatic proembryos of Vitis berlandieri × V. rupestris cv. 'Richter 110' rootstock were transformed with an oncogene-silencing transgene based on iaaM and ipt oncogene sequences from octopine-type, tumor-inducing (Ti) plasmid pTiA6. Twentyone transgenic lines were selected, and their transgenic nature was confirmed by polymerase chain reaction (PCR). These lines were inoculated with two A. tumefaciens and three A. vitis strains. Eight lines showed resistance to octopine-type A. tumefaciens A348. Resistance correlated with the expression of the silencing genes. However, oncogene silencing was mostly sequence specific because these lines did not abolish tumorigenesis by A. vitis strains or nopaline-type A. tumefaciens C58

Large-Scale Assessment of the Zebrafish Embryo as a Possible Predictive Model in Toxicity Testing

Background: In the drug discovery pipeline, safety pharmacology is a major issue. The zebrafish has been proposed as a model that can bridge the gap in this field between cell assays (which are cost-effective, but low in data content) and rodent assays (which are high in data content, but less cost-efficient). However, zebrafish assays are only likely to be useful if they can be shown to have high predictive power. We examined this issue by assaying 60 water-soluble compounds representing a range of chemical classes and toxicological mechanisms. Methodology/Principal Findings: Over 20,000 wild-type zebrafish embryos (including controls) were cultured individually in defined buffer in 96-well plates. Embryos were exposed for a 96 hour period starting at 24 hours post fertilization. A logarithmic concentration series was used for range-finding, followed by a narrower geometric series for LC 50 determination. Zebrafish embryo LC50 (log mmol/L), and published data on rodent LD50 (log mmol/kg), were found to be strongly correlated (using Kendall’s rank correlation tau and Pearson’s product-moment correlation). The slope of the regression line for the full set of compounds was 0.73403. However, we found that the slope was strongly influenced by compound class. Thus, while most compounds had a similar toxicity level in both species, some compounds were markedly more toxic in zebrafish than in rodents, or vice versa. Conclusions: For the substances examined here, in aggregate, the zebrafish embryo model has good predictivity for toxicit