514 research outputs found
Water waves overtopping over barriers
A numerical and experimental analysis of the wave overtopping over emerged and submerged structures, is presented. An original model is used in order to simulate three-dimensional free surface flows. The model is based on the numerical solution of the motion equations expressed in an integral form in time-dependent curvilinear coordinates. A non-intrusive and continuous-in-space image analysis technique, which is able to properly identify the free surface even in very shallow waters or breaking waves, is adopted for the experimental tests. Numerical and experimental results are compared, for several wave and water depth conditions
Recommended from our members
Particle organization after viscous sedimentation in tilted containers
A series of sedimentation experiments and numerical simulations have been conducted
to understand the factors that control the final angle of a static sediment
layer formed by quasi-monodisperse particles settling in an inclined container. The
set of experiments includes several combinations of fluid viscosity, container angle,
and solids concentration. A comparison between the experiments and a set of twodimensional
numerical simulations shows that the physical mechanism responsible
for the energy dissipation in the system is the collision between the particles.
The results provide new insights into the mechanism that sets the morphology of
the sediment layer formed by the settling of quasi-monodisperse particles onto the
bottom of an inclined container. Tracking the interface between the suspension solids
and the clear fluid zone reveals that the final angle adopted by the sediment layer
shows strong dependencies on the initial particle concentration and the container
inclination, but not the fluid viscosity. It is concluded that (1) the hindrance function
plays an important role on the sediment bed angle, (2) the relation between the
friction effect and the slope may be explained as a quasi-linear function of the
projected velocity along the container bottom, and (3) prior to the end of settling
there is a significant interparticle interaction through the fluid affecting to the final
bed organization.We can express the sediment bed slope as a function of two dimensionless
numbers, a version of the inertial number and the particle concentration.
The present experiments confirm some previous results on the role of the interstitial
fluid on low Stokes number flows of particulate matter.The authors acknowledge the support of the National Commission for Scientific and Techno-
logical Research of Chile, CONICYT, Grant Nâ—¦ 21110766, Fondecyt Projects Nâ—¦ 11110201
and Nâ—¦ 1130910, the Department of Civil Engineering, the Department of Mining Engineering and the Advanced Mining Technology Center of the University of Chile, as well the staff
of the G.K. Batchelor Laboratory, Department of Applied Mathematics and Theoretical
Physics, University of Cambridge.This is the author accepted manuscript. The final version is available from AIP at http://dx.doi.org/10.1063/1.4958722
A Numerical Analysis on Nanofluid Mixed Convection in Triangular Cross-Sectioned Ducts Heated by a Uniform Heat Flux:
In this paper, results obtained by the numerical investigation on laminar mixed convection in triangular ducts, filled with nanofluids, are presented in order to evaluate the fluid dynamic and thermal features of the considered geometry by considering Al 2 O 3 /water based nanofluids. The system is heated by a constant and uniform heat flux also along the perimeter of the triangular duct section in H2 mode as thermal boundary condition and the single-phase model has been assigned for a Reynolds number value equal to 100. Results are given for different nanoparticle volume concentrations and Richardson number values ranging from 0% to 5% and from 0 to 5, respectively. Results, presented for the fully developed regime flow, show the enhancement of average convective heat transfer coefficients values for increasing values of Richardson number and particle fractions. However, wall shear stress and required pumping power profiles increase as expected. The PEC analysis showed that the use of nanofluids in mixed convection seems slightly convenient. It should be underlined that, at the moment, experimental data are not available to compare the numerical proposed model for mixed convection in horizontal triangular ducts with nanofluids
Sensor architectures and technologies for upper limb 3d surface reconstruction: A review
3D digital models of the upper limb anatomy represent the starting point for the design process of bespoke devices, such as orthoses and prostheses, which can be modeled on the actual patient’s anatomy by using CAD (Computer Aided Design) tools. The ongoing research on optical scanning methodologies has allowed the development of technologies that allow the surface reconstruction of the upper limb anatomy through procedures characterized by minimum discomfort for the patient. However, the 3D optical scanning of upper limbs is a complex task that requires solving problematic aspects, such as the difficulty of keeping the hand in a stable position and the presence of artefacts due to involuntary movements. Scientific literature, indeed, investigated different approaches in this regard by either integrating commercial devices, to create customized sensor architectures, or by developing innovative 3D acquisition techniques. The present work is aimed at presenting an overview of the state of the art of optical technologies and sensor architectures for the surface acquisition of upper limb anatomies. The review analyzes the working principles at the basis of existing devices and proposes a categorization of the approaches based on handling, pre/post-processing effort, and potentialities in real-time scanning. An in-depth analysis of strengths and weaknesses of the approaches proposed by the research community is also provided to give valuable support in selecting the most appropriate solution for the specific application to be addressed
Chromatin Protamination and Catsper Expression in Spermatozoa Predict Clinical Outcomes after Assisted Reproduction Programs
Abstract Identification of parameters predicting assisted reproductive technologies (ARTs) success is a major goal of research in reproduction. Quality of gametes is essential to achieve good quality embryos and increase the success of ARTs. We evaluated two sperm parameters, chromatin maturity and expression of the sperm specific calcium channel CATSPER, in relation to ART outcomes in 206 couples undergoing ARTs. Chromatin maturity was evaluated by Chromomycin A3 (CMA3) for protamination and Aniline Blue (AB) for histone persistence and CATSPER expression by a flow cytometric method. CMA3 positivity and CATSPER expression significantly predicted the attainment of good quality embryos with an OR of 6.6 and 14.3 respectively, whereas AB staining was correlated with fertilization rate. In the subgroup of couples with women ≤35 years, CATSPER also predicted achievement of clinical pregnancy (OR = 4.4). Including CMA3, CATSPER and other parameters affecting ART outcomes (female age, female factor and number of MII oocytes), a model that resulted able to predict good embryo quality with high accuracy was developed. CMA3 staining and CATSPER expression may be considered two applicable tools to predict ART success and useful for couple counseling. This is the first study demonstrating a role of CATSPER expression in embryo development after ARTs programs
A Fast Matrix Compression Method for Large Scale Numerical Modelling of Rotationally Symmetric 3D Passive Structures in Fusion Devices
Evaluation of sperm DNA quality in men presenting with testicular cancer and lymphoma using alkaline and neutral Comet assays
- …