175 research outputs found
Factors impacting time to total shoulder arthroplasty among patients with primary glenohumeral osteoarthritis and rotator cuff arthropathy managed conservatively with corticosteroid injections
Background The purpose of this study was to identify predictors of the time from initial presentation to total shoulder arthroplasty (TSA) in patients with primary glenohumeral osteoarthritis (OA) and rotator cuff (RTC) arthropathy who were conservatively managed with corticosteroid injections. Methods We conducted a retrospective cohort study of patients who underwent TSA from 2010 to 2021. Kaplan-Meier survival analysis was used to estimate median time to TSA for primary OA and RTC arthropathy patients. The Cox proportional hazards model was used to identify significant predictors of time to TSA and to calculate hazard ratios (HRs) with 95% confidence intervals (CIs). Statistical significance was set at P<0.05. Results The cohort included 160 patients with primary OA and 92 with RTC arthropathy. In the primary OA group, median time to TSA was 15 months. Significant predictors of shorter time to TSA were older age at presentation (HR, 1.02; 95% CI, 1.00–1.04; P=0.03) and presence of moderate or severe acromioclavicular joint arthritis (HR, 1.45; 95% CI, 1.05–2.01; P=0.03). In the RTC arthropathy group, median time to TSA was 14 months, and increased number of corticosteroid injections was associated with longer time to TSA (HR, 0.87; 95% CI, 0.80–0.95; P=0.003). Conclusions There are distinct prognostic factors for progression to TSA between primary OA patients and RTC arthropathy patients managed with corticosteroid injections. Multiple corticosteroid injections are associated with delayed time to TSA in RTC arthropathy patients. Level of evidence III
Level structure of the Tz=-1 nucleus Ar 34 and its relevance for nucleosynthesis in ONe novae
The Mg24+C12 fusion reaction was used to perform a detailed γ-ray spectroscopy study of the astrophysically important nucleus Ar34. In particular, an experimental setup, coupling the advanced γ-ray tracking array GRETINA with the well-established Argonne fragment mass analyzer (FMA), was employed to obtain excitation energies and spin-parity assignments for excited states in Ar34, both above and below the proton separation energy. For the first time, an angular distribution analysis of in-beam γ rays from fusion-evaporation reactions, using a tracking array, has been performed and Coulomb energy differences of analog states in the T=1, A=34 mirror system, explored from 0 to 6 MeV. Furthermore, we present a comprehensive discussion of the astrophysical Cl33(p,γ) stellar reaction rate, together with implications for the identification of nova presolar grains from sulfur isotopic abundances
Search for Nova Presolar Grains: γ -Ray Spectroscopy of Ar 34 and its Relevance for the Astrophysical Cl 33 (p,γ) Reaction
The discovery of presolar grains in primitive meteorites has initiated a new era of research in the study of stellar nucleosynthesis. However, the accurate classification of presolar grains as being of specific stellar origins is particularly challenging. Recently, it has been suggested that sulfur isotopic abundances may hold the key to definitively identifying presolar grains with being of nova origins and, in this regard, the astrophysical Cl33(p,γ)Ar34 reaction is expected to play a decisive role. As such, we have performed a detailed γ-ray spectroscopy study of Ar34. Excitation energies have been measured with high precision and spin-parity assignments for resonant states, located above the proton threshold in Ar34, have been made for the first time. Uncertainties in the Cl33(p,γ) reaction have been dramatically reduced and the results indicate that a newly identified ℓ =0 resonance at Er=396.9(13) keV dominates the entire rate for T=0.25-0.40 GK. Furthermore, nova hydrodynamic simulations based on the present work indicate an ejected S32/S33 abundance ratio distinctive from type-II supernovae and potentially compatible with recent measurements of a presolar grain
Can osseous landmarks in the distal medial humerus be used to identify the attachment sites of ligaments and tendons: paleopathologic–anatomic imaging study in cadavers
Objective: To describe osseous landmarks that allow identification of the attachments of the ligaments and tendons in the distal medial aspect of the humerus. Materials and methods: Reliable osseous landmarks in the distal medial aspect of the humerus were identified in 34 well-preserved specimens from a paleopathologic collection. These osseous landmarks were then sought in magnetic resonance (MR) images of ten cadaveric elbow specimens so that the ease of their visualization and optimal imaging plane could be assessed. To assign these osseous landmarks to specific attachments of the tendons and ligaments in the distal medial humerus, we cut the specimens in slices and photographed and examined them. Subsequently, the prevalence of these osseous landmarks as well as the attachment sites of the tendons and ligaments in this location was determined. Results: We determined ten reliable osseous landmarks in the distal medial aspect of the humerus, their prevalence and ease of identification, and their relationship to the attachments of the tendons and ligaments at the medial distal humerus. Conclusion: It is possible to use osseous landmarks at the distal medial humerus to facilitate identification of the different attachments of tendons and ligaments when MR images of the elbow are assesse
Ceramic on ceramic bearing fractures in total hip arthroplasty : an analysis of data from the national joint registry
Aims: Ceramic-on-ceramic (CoC) bearings in total hip arthroplasty (THA) are commonly used but concerns exist regarding ceramic fracture. This study aims to report the risk of revision for fracture of modern CoC bearings and identify factors that might influence this risk, using data from the National Joint Registry (NJR). Patients and Methods: We analysed data on 111,681 primary CoC THA’s and 182 linked revisions for bearing fracture recorded in NJR. We used implant codes to identify ceramic bearing composition and generated Kaplan-Meier estimates for implant survivorship. Logistic regression analyses were performed for implant size and patient specific variables to determine any associated risks for revision. Results: 99.8% of bearings were CeramTec Biolox® products. Revisions for fracture were linked to 7 of 79,442 (0.009%) Biolox® Delta heads, 38 of 31,982 (0.119%) Biolox® Forte heads, 101 of 80,170 (0.126%) Biolox® Delta liners and 35 of 31,258 (0.112%) Biolox® Forte liners. Regression analysis of implant size revealed smaller heads had significantly higher odds of fracture (χ2=68.0, p<0.0001). The highest fracture risk were observed in the 28mm Biolox® Forte subgroup (0.382%). There were no fractures in the 40mm head group for either ceramic type. Liner thickness was not predictive of fracture (p=0.67). BMI was independently associated with revision for both head fractures (OR 1.09 per unit increase, p=0.031) and liner fractures (OR 1.06 per unit increase, p=0.006). Conclusions: We report the largest study of CoC bearing fractures to date. The risk of revision for CoC bearing fracture is very low, however previous studies have underestimated this risk. There is good evidence that the latest generation of ceramic has greatly reduced the odds of head fracture but not of liner fracture. Small head size and high patient BMI are associated with an increased risk of ceramic bearing fracture
Mechanically assisted electrochemical degradation of alumina-TiC composites
Alumina-TiC composite material is a tough ceramic composite with excellent hardness, wear resistance and oxidation resistance in dry and high-temperature conditions. In aqueous conditions, however, it is likely to be electrochemically active facilitating charge transfer processes due to the conductive nature of TiC. For application as an orthopedic biomaterial, it is crucial to assess the electrochemical behavior of this composite, especially under a combined mechanical and electrochemical environment. In this study, we examined the mechanically assisted electrochemical performance of alumina-TiC composite in an aqueous environment. The spontaneous electrochemical response to brushing abrasion was measured. Changes in the magnitude of electrochemical current with abrasion test conditions and possible causal relationship to the alteration in surface morphology were examined. Results showed that the alumina matrix underwent abrasive wear with evidence of microploughing and grain boundary damage. Chemical analysis revealed TiO2 formation in the abraded region, indicating oxidation of the conductive TiC domain. Furthermore, wear debris from alumina abrasion appeared to affect reaction kinetics at the composite-electrolyte interface. From this work, we established that the composite undergoes abrasion assisted electrochemical degradation even in gentle abrasive conditions and the severity of degradation is related to temperature and conditions of test environment
Suppression of GATA-3 Nuclear Import and Phosphorylation: A Novel Mechanism of Corticosteroid Action in Allergic Disease
Peter Barnes and colleagues show that corticosteroids have a potent inhibitory effect on GATA-3 via two interacting mechanisms that suppress Th2 cytokine expression. This novel mechanism of corticosteroid action may help explain the efficacy of corticosteroids in allergic diseases
Search for Nova Presolar Grains: γ -Ray Spectroscopy of Ar 34 and its Relevance for the Astrophysical Cl 33 (p,γ) Reaction
The discovery of presolar grains in primitive meteorites has initiated a new era of research in the study of stellar nucleosynthesis. However, the accurate classification of presolar grains as being of specific stellar origins is particularly challenging. Recently, it has been suggested that sulfur isotopic abundances may hold the key to definitively identifying presolar grains with being of nova origins and, in this regard, the astrophysical Cl33(p,γ)Ar34 reaction is expected to play a decisive role. As such, we have performed a detailed γ-ray spectroscopy study of Ar34. Excitation energies have been measured with high precision and spin-parity assignments for resonant states, located above the proton threshold in Ar34, have been made for the first time. Uncertainties in the Cl33(p,γ) reaction have been dramatically reduced and the results indicate that a newly identified ℓ =0 resonance at Er=396.9(13) keV dominates the entire rate for T=0.25-0.40 GK. Furthermore, nova hydrodynamic simulations based on the present work indicate an ejected S32/S33 abundance ratio distinctive from type-II supernovae and potentially compatible with recent measurements of a presolar grain
Long-term results of 32-mm alumina-on-alumina THA for avascular necrosis of the femoral head
BACKGROUND:
Ceramic bearings in total hip arthroplasty (THA) have been introduced in clinical practice to minimize the problem of polyethylene particle-induced osteolysis. The aim of the study is to report the results of 68 consecutive alumina-on-alumina THAs done in 61 patients for avascular necrosis (AVN) of the femoral head.
MATERIALS AND METHODS:
In all implants a press-fit cup was used; it was combined with a 32-mm alumina head and with titanium-alloy stems. The mean age at surgery was 50 years. At an average follow-up of 13 years two hips have been revised, one for periprosthetic infection and one for excessive abduction of the cup.
RESULTS:
No revision for aseptic loosening is recorded; one anatomical cementless femoral stem had radiological evidence of definite aseptic loosening. No dislocations occurred, and no osteolysis was observed.
CONCLUSIONS:
The results support the application of alumina-alumina THA for long-lasting replacements
Level structure of the Tz=-1 nucleus Ar 34 and its relevance for nucleosynthesis in ONe novae
The Mg24+C12 fusion reaction was used to perform a detailed γ-ray spectroscopy study of the astrophysically important nucleus Ar34. In particular, an experimental setup, coupling the advanced γ-ray tracking array GRETINA with the well-established Argonne fragment mass analyzer (FMA), was employed to obtain excitation energies and spin-parity assignments for excited states in Ar34, both above and below the proton separation energy. For the first time, an angular distribution analysis of in-beam γ rays from fusion-evaporation reactions, using a tracking array, has been performed and Coulomb energy differences of analog states in the T=1, A=34 mirror system, explored from 0 to 6 MeV. Furthermore, we present a comprehensive discussion of the astrophysical Cl33(p,γ) stellar reaction rate, together with implications for the identification of nova presolar grains from sulfur isotopic abundances
- …