Constraints on the perturbed mutual motion in Didymos due to impact-induced deformation of its primary after the DART impact

Binary near-Earth asteroid (65803) Didymos is the target of the proposed NASA Double Asteroid Redirection Test (DART), part of the Asteroid Impact & Deflection Assessment (AIDA) mission concept. In this mission, the DART spacecraft is planned to impact the secondary body of Didymos, perturbing mutual dynamics of the system. The primary body is currently rotating at a spin period close to the spin barrier of asteroids, and materials ejected from the secondary due to the DART impact are likely to reach the primary. These conditions may cause the primary to reshape, due to landslides, or internal deformation, changing the permanent gravity field. Here, we propose that if shape deformation of the primary occurs, the mutual orbit of the system would be perturbed due to a change in the gravity field. We use a numerical simulation technique based on the full two-body problem to investigate the shape effect on the mutual dynamics in Didymos after the DART impact. The results show that under constant volume, shape deformation induces strong perturbation in the mutual motion. We find that the deformation process always causes the orbital period of the system to become shorter. If surface layers with a thickness greater than ~0.4 m on the poles of the primary move down to the equatorial region due to the DART impact, a change in the orbital period of the system and in the spin period of the primary will be detected by ground-based measurement.Comment: 8 pages, 7 figures, 2 tables, accepted for publication in MNRA

Nunalleq, Stories from the Village of Our Ancestors:Co-designing a multivocal educational resource based on an archaeological excavation

This work was funded by the UK-based Arts and Humanities Research Council through grants (AH/K006029/1) and (AH/R014523/1), a University of Aberdeen IKEC Award with additional support for travel and subsistence from the University of Dundee, DJCAD Research Committee RS2 project funding. Thank you to the many people who contributed their support, knowledge, feedback, voices and faces throughout the project, this list includes members of the local community, colleagues, specialists, students, and volunteers. If we have missed out any names we apologize but know that your help was appreciated. Jimmy Anaver, John Anderson, Alice Bailey, Kieran Baxter, Pauline Beebe, Ellinor Berggren, Dawn Biddison, Joshua Branstetter, Brendan Body, Lise Bos, Michael Broderick, Sarah Brown, Crystal Carter, Joseph Carter, Lucy Carter, Sally Carter, Ben Charles, Mary Church, Willard Church, Daniele Clementi, Annie Cleveland, Emily Cleveland, Joshua Cleveland, Aron Crowell, Neil Curtis, Angie Demma, Annie Don, Julia Farley, Veronique Forbes, Patti Fredericks, Tricia Gillam, Sean Gleason, Sven Haakanson, Cheryl Heitman, Grace Hill, Diana Hunter, Joel Isaak, Warren Jones, Stephan Jones, Ana Jorge, Solveig Junglas, Melia Knecht, Rick Knecht, Erika Larsen, Paul Ledger, Jonathan Lim Soon, Amber Lincoln, Steve Luke, Francis Lukezic, Eva Malvich, Pauline Matthews, Roy Mark, Edouard Masson-MacLean, Julie Masson-MacLean, Mhairi Maxwell, Chuna Mcintyre, Drew Michael, Amanda Mina, Anna Mossolova, Carl Nicolai Jr, Chris Niskanen, Molly Odell, Tom Paxton, Lauren Phillips, Lucy Qin, Charlie Roberts, Chris Rowe, Rufus Rowe,Chris Rowland, John Rundall, Melissa Shaginoff, Monica Shah, Anna Sloan, Darryl Small Jr, John Smith, Mike Smith, Joey Sparaga, Hannah Strehlau, Dora Strunk, Larissa Strunk, Lonny Strunk, Larry Strunk, Robbie Strunk, Sandra Toloczko, Richard Vanderhoek, the Qanirtuuq Incorporated Board, the Quinhagak Dance Group and the staff at Kuinerrarmiut Elitnaurviat. We also extend our thanks to three anonymous reviewers for their valuable comments on our paper.Peer reviewedPublisher PD

The impact of migration on the sexual health, behaviours and attitudes of Central and East European gay/bisexual men in London

Extensive social psychological research emphasises the importance of groups in shaping individuals' thoughts and actions. Within the child sexual abuse (CSA) literature criminal organisation has been largely overlooked, with some key exceptions. This research was a novel collaboration between academia and the UK's Child Exploitation and Online Protection Centre (CEOP). Starting from the premise that the group is, in itself, a form of social situation affecting abuse, it offers the first systematic situational analysis of CSA groups. In-depth behavioural data from a small sample of convicted CSA group-offenders (n =3) were analysed qualitatively to identify factors and processes underpinning CSA groups' activities and associations: group formation, evolution, identity and resources. The results emphasise CSA groups' variability, fluidity and dynamism. The foundations of a general framework are proposed for researching and assessing CSA groups and designing effective interventions. It is hoped that this work will stimulate discussion and development in this long-neglected area of CSA, helping to build a coherent knowledge-base

An upper limit for the water outgassing rate of the main-belt comet 176P/LINEAR observed with Herschel/HIFI

176P/LINEAR is a member of the new cometary class known as main-belt comets (MBCs). It displayed cometary activity shortly during its 2005 perihelion passage that may be driven by the sublimation of sub-surface ices. We have therefore searched for emission of the H2O 110-101 ground state rotational line at 557 GHz toward 176P/LINEAR with the Heterodyne Instrument for the Far Infrared (HIFI) on board the Herschel Space Observatory on UT 8.78 August 2011, about 40 days after its most recent perihelion passage, when the object was at a heliocentric distance of 2.58 AU. No H2O line emission was detected in our observations, from which we derive sensitive 3-sigma upper limits for the water production rate and column density of < 4e25 molec/s and of < 3e10 cm^{-2}, respectively. From the peak brightness measured during the object's active period in 2005, this upper limit is lower than predicted by the relation between production rates and visual magnitudes observed for a sample of comets by Jorda et al. (2008) at this heliocentric distance. Thus, 176P/LINEAR was likely less active at the time of our observation than during its previous perihelion passage. The retrieved upper limit is lower than most values derived for the H2O production rate from the spectroscopic search for CN emission in MBCs.Comment: 5 pages, 2 figures. Minor changes to match published versio

ALMA Observations of the DART Impact: Characterizing the Ejecta at Sub-Millimeter Wavelengths

We report observations of the Didymos-Dimorphos binary asteroid system using the Atacama Large Millimeter/Submillimeter Array (ALMA) and the Atacama Compact Array (ACA) in support of the Double Asteroid Redirection Test (DART) mission. Our observations on UT 2022 September 15 provided a pre-impact baseline and the first measure of Didymos-Dimorphos' spectral emissivity at $\lambda=0.87$ mm, which was consistent with the handful of siliceous and carbonaceous asteroids measured at millimeter wavelengths. Our post-impact observations were conducted using four consecutive executions each of ALMA and the ACA spanning from T$+$3.52 to T$+$8.60 hours post-impact, sampling thermal emission from the asteroids and the impact ejecta. We scaled our pre-impact baseline measurement and subtracted it from the post-impact observations to isolate the flux density of mm-sized grains in the ejecta. Ejecta dust masses were calculated for a range of materials that may be representative of Dimorphos' S-type asteroid material. The average ejecta mass over our observations is consistent with 1.3--6.4$\times10^7$ kg, with the lower and higher values calculated for amorphous silicates and for crystalline silicates, respectively. Owing to the likely crystalline nature of S-type asteroid material, the higher value is favored. These ejecta masses represent 0.3--1.5\% of Dimorphos' total mass and are in agreement with lower limits on the ejecta mass based on measurements at optical wavelengths. Our results provide the most sensitive measure of mm-sized material in the ejecta and demonstrate the power of ALMA for providing supporting observations to spaceflight missions

Reinforcing the role of the conventional C-arm - a novel method for simplified distal interlocking

<p>Abstract</p> <p>Background</p> <p>The common practice for insertion of distal locking screws of intramedullary nails is a freehand technique under fluoroscopic control. The process is technically demanding, time-consuming and afflicted to considerable radiation exposure of the patient and the surgical personnel. A new concept is introduced utilizing information from within conventional radiographic images to help accurately guide the surgeon to place the interlocking bolt into the interlocking hole. The newly developed technique was compared to conventional freehand in an operating room (OR) like setting on human cadaveric lower legs in terms of operating time and radiation exposure.</p> <p>Methods</p> <p>The proposed concept (guided freehand), generally based on the freehand gold standard, additionally guides the surgeon by means of visible landmarks projected into the C-arm image. A computer program plans the correct drilling trajectory by processing the lens-shaped hole projections of the interlocking holes from a single image. Holes can be drilled by visually aligning the drill to the planned trajectory. Besides a conventional C-arm, no additional tracking or navigation equipment is required.</p> <p>Ten fresh frozen human below-knee specimens were instrumented with an Expert Tibial Nail (Synthes GmbH, Switzerland). The implants were distally locked by performing the newly proposed technique as well as the conventional freehand technique on each specimen. An orthopedic resident surgeon inserted four distal screws per procedure. Operating time, number of images and radiation time were recorded and statistically compared between interlocking techniques using non-parametric tests.</p> <p>Results</p> <p>A 58% reduction in number of taken images per screw was found for the guided freehand technique (7.4 ± 3.4) (mean ± SD) compared to the freehand technique (17.6 ± 10.3) (<it>p </it>< 0.001). Total radiation time (all 4 screws) was 55% lower for the guided freehand technique compared to conventional freehand (<it>p </it>= 0.001). Operating time per screw (from first shot to screw tightened) was on average 22% reduced by guided freehand (<it>p </it>= 0.018).</p> <p>Conclusions</p> <p>In an experimental setting, the newly developed guided freehand technique for distal interlocking has proven to markedly reduce radiation exposure when compared to the conventional freehand technique. The method utilizes established clinical workflows and does not require cost intensive add-on devices or extensive training. The underlying principle carries potential to assist implant positioning in numerous other applications within orthopedics and trauma from screw insertions to placement of plates, nails or prostheses.</p

THE ROLE OF INTERDEPENDENCE IN THE MICRO-FOUNDATIONS OF ORGANIZATION DESIGN: TASK, GOAL, AND KNOWLEDGE INTERDEPENDENCE

Interdependence is a core concept in organization design, yet one that has remained consistently understudied. Current notions of interdependence remain rooted in seminal works, produced at a time when managers’ near-perfect understanding of the task at hand drove the organization design process. In this context, task interdependence was rightly assumed to be exogenously determined by characteristics of the work and the technology. We no longer live in that world, yet our view of interdependence has remained exceedingly task-centric and our treatment of interdependence overly deterministic. As organizations face increasingly unpredictable workstreams and workers co-design the organization alongside managers, our field requires a more comprehensive toolbox that incorporates aspects of agent-based interdependence. In this paper, we synthesize research in organization design, organizational behavior, and other related literatures to examine three types of interdependence that characterize organizations’ workflows: task, goal, and knowledge interdependence. We offer clear definitions for each construct, analyze how each arises endogenously in the design process, explore their interrelations, and pose questions to guide future research

After DART: Using the First Full-scale Test of a Kinetic Impactor to Inform a Future Planetary Defense Mission

NASA’s Double Asteroid Redirection Test (DART) is the first full-scale test of an asteroid deflection technology. Results from the hypervelocity kinetic impact and Earth-based observations, coupled with LICIACube and the later Hera mission, will result in measurement of the momentum transfer efficiency accurate to ∼10% and characterization of the Didymos binary system. But DART is a single experiment; how could these results be used in a future planetary defense necessity involving a different asteroid? We examine what aspects of Dimorphos’s response to kinetic impact will be constrained by DART results; how these constraints will help refine knowledge of the physical properties of asteroidal materials and predictive power of impact simulations; what information about a potential Earth impactor could be acquired before a deflection effort; and how design of a deflection mission should be informed by this understanding. We generalize the momentum enhancement factor β, showing that a particular direction-specific β will be directly determined by the DART results, and that a related direction-specific β is a figure of merit for a kinetic impact mission. The DART β determination constrains the ejecta momentum vector, which, with hydrodynamic simulations, constrains the physical properties of Dimorphos’s near-surface. In a hypothetical planetary defense exigency, extrapolating these constraints to a newly discovered asteroid will require Earth-based observations and benefit from in situ reconnaissance. We show representative predictions for momentum transfer based on different levels of reconnaissance and discuss strategic targeting to optimize the deflection and reduce the risk of a counterproductive deflection in the wrong direction