AGRICULTURAL COLLEGE LIBRARY BUDGET: A STATISTICAL OVERVIEW

The objective of the present research paper is to highlight Agricultural college library budgets under the jurisdiction of Mahatma Phule Agricultural University, Rahuri. It includes expenditure of library budgets under varies heads. The present study has various aspects. One of them is the assessment of the present budgetary status of Agricultural college libraries and to find out need of change, to suggest practical solutions to the prevailing problems of the college libraries with the help of the questionnaire method, the questionnaire was sent to all 49 Agricultural College Libraries along with self addressed duly stamped envelope with return postage by the researcher. The respondents were asked to return the questionnaire within 3 Months. Out of 49 only 40 (81.63%) questionnaires were received within a stipulated period

Origins of the coronary arteries and their significance

OBJECTIVE: To describe the normal and variant anatomy of the coronary artery ostia in Indian subjects. INTRODUCTION: Anomalous coronary origins may cause potentially dangerous symptoms, and even sudden death during strenuous activity. A cadaveric study in an unsuspected population provides a basis for understanding the normal variants, which may facilitate determination of the prevalence of anomalies and evaluation of the value of screening for such anomalies. METHODS: One hundred and five heart specimens were dissected. The number of ostia and their positions within the respective sinuses were observed. Vertical and circumferential deviations of the ostia were observed. The heights of the cusps and the ostia from the bottom of the sinus were measured. RESULTS: No openings were present in the pulmonary artery or the non-coronary sinus. The number of openings in the aortic sinuses varied from 2-5 in the present series; multiple ostia were mostly seen in the anterior sinus. The majority of the ostia lay below the sinutubular ridge (89%) and at or above the level of the upper margin of the cusps (84%). Left ostial openings were mainly centrally located (80%), whereas the right coronary ostia were often shifted towards the right posterior aortic sinus (59%). DISCUSSION: The preferential location of the ostia was within the sinus and above the cusps, but below the sinutubular ridge. On occasion, normal variants like multiple ostia, vertical or circumferential shift in the position, and slit-like ostia may create confusion in interpreting the images and pose a difficulty during procedures like angiography, angioplasty, and coronary artery bypass grafting

Experimental Visualization of Flows in Packed Beds of Spheres

The flow experiment consisted of an oil tunnel, 76 x 76 mm in cross-section, packed with lucite spheres. The index of refraction of the working fluid and the spheres were matched such that the physical spheres invisible to the eye and camera. By seeding the oil and illuminating the packed bed with planar laser light sheet, aligned in the direction of the bulk flow, the system fluid dynamics becomes visible and the 2-D projection was recorded at right angles to the bulk flow. The planar light sheet was traversed from one side of the tunnel to the other providing a simulated 3-D image of the entire flow field. The boundary interface between the working fluid and the sphere rendered the sphere black permitting visualization of the exact locations of the circular interfaces in both the axial and transverse directions with direct visualization of the complex interstitial spaces between the spheres within the bed. Flows were observed near the surfaces of a plane and set of spheres as well as minor circles that appear with great circles and not always uniformly ordered. In addition to visualizing a very complex flow field, it was observed that flow channeling in the direction of the bulk flow occurs between sets of adjacent spheres. Still photographs and video recordings illustrating the flow phenomena will be presented

AGRICULTURAL COLLEGE LIBRARY BUDGET: A STATISTICAL OVERVIEW

The objective of the present research paper is to highlight Agricultural college library budgets under the jurisdiction of Mahatma Phule Agricultural University, Rahuri. It includes expenditure of library budgets under varies heads. The present study has various aspects. One of them is the assessment of the present budgetary status of Agricultural college libraries and to find out need of change, to suggest practical solutions to the prevailing problems of the college libraries with the help of the questionnaire method, the questionnaire was sent to all 49 Agricultural College Libraries along with self addressed duly stamped envelope with return postage by the researcher. The respondents were asked to return the questionnaire within 3 Months. Out of 49 only 40 (81.63%) questionnaires were received within a stipulated period

Virtual and Experimental Visualization of Flows in Packed Beds of Spheres Simulating Porous Media Flows

A videotape presentation of flow in a packed bed of spheres is provided. The flow experiment consisted of three principal elements: (1) an oil tunnel 76.2 mm by 76.2 mm in cross section, (2) a packed bed of spheres in regular and irregular arrays, and (3) a flow characterization methodology, either (a) full flow field tracking (FFFT) or (b) computational fluid dynamic (CFD) simulation. The refraction indices of the oil and the test array of spheres were closely matched, and the flow was seeded with aluminum oxide particles. Planar laser light provided a two-dimensional projection of the flow field, and a traverse simulated a three-dimensional image of the entire flow field. Light focusing and reflection rendered the spheres black, permitting visualization of the planar circular interfaces in both the axial and transverse directions. Flows were observed near the wall-sphere interface and within the set of spheres. The CFD model required that a representative section of a packed bed be formed and gridded, enclosing and cutting six spheres so that symmetry conditions could be imposed at all cross-boundaries. Simulations had to be made with the flow direction at right angles to that used in the experiments, however, to take advantage of flow symmetry. Careful attention to detail was required for proper gridding. The flow field was three-dimensional and complex to describe, yet the most prominent finding was flow threads, as computed in the representative 'cube' of spheres with face symmetry and conclusively demonstrated experimentally herein. Random packing and bed voids tended to disrupt the laminar flow, creating vortices

Linearized MFL Model for Embedded Flaw Detection in Rails

Numerical models simulating magnetic flux leakage (MFL) phenomenon in ferromagnetic materials are nonlinear in nature and hence require excessive computational effort. This paper describes an approach for developing an equivalent linear model (ELM) where the ferromagnetic region is appropriately partitioned into different domains with each domain being assigned a constant permeability value depending on the magnetization level and the flaw size. The nonlinear behavior of the multi-layered object is then modeled using a linearized MFL model. The model is first validated and then applied to the flaw detection problem in a rail geometry.</p

Prospective study on quality of newborn care

Background:&nbsp;Quality of services provided by health care provider, the closest health functionary to the community has impact on neonatal mortality.&nbsp;Aims:&nbsp;Study on quality of newborn care in rural areas. &nbsp;Settings and Design:&nbsp;This is a prospective study in the field practice areas of J.N. Medical College and areas under primary health centre of public health care system in Wardha district. &nbsp;Methods and Material:&nbsp;Modified quality check list on the basis of PHC MAP module guidelines for assessing the quality of service-module 6-user’s guide was prepared. Face to face interview with 205 (group-A/104 nos + group-B/101 nos) mother of newborn was method to collected information in three postnatal visits. &nbsp;Statistical analysis:&nbsp;Quality (verbal response) of each service was quantified as acceptable, average and worst.&nbsp; Quality of both the groups was compared by calculating P-value after utilizing Z-test. &nbsp;Results:&nbsp;Over all acceptable quality of medical history was 30.03%, physical examination was 21.73%, preventive service was 91.17% and counseling was 24.83%. Significant difference between two groups were found on history taking for (cry, breathing and body movement of baby), recording weight and counseling regarding exclusive breast feeding for first 6 month of life. Worst quality in this study were observed in history for anything applying to eyes, umbilical cord stump and complication of baby for which appropriate management was taken. Except for weight recording and examination of head and fontanels all other variables under physical examination were not acceptable. Counseling regarding high risk condition of baby was only 13.66%.&nbsp;Conclusion:&nbsp;Existing newborn services except immunization is inadequate and needs to be strengthened especially physical examination and counseling services

Calibration Of The Johnson–Cook Model At High Temperatures For An Ultra-High Strength CrNiMoV Steel

This paper presents a study on the thermo-mechanical behavior of an ultra-high strength CrNiMoV steel at high temperatures and medium strain rates through hot tensile tests. The material was examined in two conditions: as-cast/heat-treated (AC/HT) and as-rolled (AR). Tensile tests were conducted at temperatures of 800,900,1000,1100, and 1200°C, and strain rates of 0.1,1, and 10s−1. Inclusion and porosity analysis was also performed on the tensile specimens. The results revealed that the flow stress decreased by approximately 70% on average from 800°C to 1200°C, while increasing by approximately 32% on average from 0.1s−1 to 10s−1 in strain rate. The elongation exhibited an increase from 16.5% at 800°C to 33% at 1200°C. However, the ductility transition was slower than expected, particularly for the AC/HT conditions. The AC/HT samples exhibited higher levels of inclusions and porosity compared to the AR samples, with porosity significantly affecting the elongation to failure and ultimate tensile strength (UTS) at a strain rate of 1s−1. Furthermore, calibrated Johnson–Cook parameters were reported and compared, demonstrating excellent agreement between predicted and experimental values with less than 20% variation. The calibrated Johnson–Cook model can be effectively employed for modeling purposes within the studied temperature range, and its application can even be extrapolated for higher strain rates

Applications of Hilbert Module Approach to Multivariable Operator Theory

A commuting $n$-tuple $(T_1, \ldots, T_n)$ of bounded linear operators on a Hilbert space \clh associate a Hilbert module $\mathcal{H}$ over $\mathbb{C}[z_1, \ldots, z_n]$ in the following sense: $$\mathbb{C}[z_1, \ldots, z_n] \times \mathcal{H} \rightarrow \mathcal{H}, \quad \quad (p, h) \mapsto p(T_1, \ldots, T_n)h,$$where $p \in \mathbb{C}[z_1, \ldots, z_n]$ and $h \in \mathcal{H}$. A companion survey provides an introduction to the theory of Hilbert modules and some (Hilbert) module point of view to multivariable operator theory. The purpose of this survey is to emphasize algebraic and geometric aspects of Hilbert module approach to operator theory and to survey several applications of the theory of Hilbert modules in multivariable operator theory. The topics which are studied include: generalized canonical models and Cowen-Douglas class, dilations and factorization of reproducing kernel Hilbert spaces, a class of simple submodules and quotient modules of the Hardy modules over polydisc, commutant lifting theorem, similarity and free Hilbert modules, left invertible multipliers, inner resolutions, essentially normal Hilbert modules, localizations of free resolutions and rigidity phenomenon. This article is a companion paper to "An Introduction to Hilbert Module Approach to Multivariable Operator Theory".Comment: 46 pages. This is a companion paper to arXiv:1308.6103. To appear in Handbook of Operator Theory, Springe