3,421 research outputs found
De-icing and runback characteristics of three cyclic electric, external de-icing boots employing chordwise shedding
Experimental studies on thermodynamic effects of developed cavitation
A method for predicting thermodynamic effects of cavitation (changes in cavity pressure relative to stream vapor pressure) is presented. The prediction method accounts for changes in liquid, liquid temperature, flow velocity, and body scale. Both theoretical and experimental studies used in formulating the method are discussed. The prediction method provided good agreement between predicted and experimental results for geometrically scaled venturis handling four different liquids of widely diverse physical properties. Use of the method requires geometric similarity of the body and cavitated region and a known reference cavity-pressure depression at one operating condition
Method for prediction of pump cavitation performance for various liquids, liquid temperatures, and rotative speeds
Prediction of cavitation performance of centrifugal pump
A General Correlation of Temperature Profiles Downstream of a Heated-Air Jet Directed Perpendicularly to an Air Stream
An experimental investigation was conducted to determine the temperature profile downstream of a heated-air jet directed perpendicularly to an air stream. The profiles were determined at several positions downstream of the jet as functions of jet density, jet velocity, freestream density, free-stream velocity, jet temperature, and orifice flow coefficient. A method is presented which yields a good approximation of the temperature profile in terms of dimensionless parameters of the flow and geometric conditions
Performance of a highly loaded two stage axial-flow fan
A two-stage axial-flow fan with a tip speed of 1450 ft/sec (442 m/sec) and an overall pressure ratio of 2.8 was designed, built, and tested. At design speed and pressure ratio, the measured flow matched the design value of 184.2 lbm/sec (83.55kg/sec). The adiabatic efficiency at the design operating point was 85.7 percent. The stall margin at design speed was 10 percent. A first-bending-mode flutter of the second-stage rotor blades was encountered near stall at speeds between 77 and 93 percent of design, and also at high pressure ratios at speeds above 105 percent of design. A 5 deg closed reset of the first-stage stator eliminated second-stage flutter for all but a narrow speed range near 90 percent of design
Performance with and without inlet radial distortion of a transonic fan stage designed for reduced loading in the tip region
A transonic compressor stage designed for a reduced loading in the tip region of the rotor blades was tested with and without inlet radial distortion. The rotor was 50 cm in diameter and designed for an operating tip speed of 420 m/sec. Although the rotor blade loading in the tip region was reduced to provide additional operating range, analysis of the data indicates that the flow around the damper appears to be critical and limited the stable operating range of this stage. For all levels of tip and hub radial distortion, there was a large reduction in the rotor stall margin
Performance and boundary-layer evaluation of a sonic inlet
Tests were conducted to determine the boundary layer characteristics and aerodynamic performance of a radial vane sonic inlet with a length/diameter ratio of 1 for several vane configurations. The sonic inlet was designed with a slight wavy wall type of diffuser geometry, which permits operation at high inlet Mach numbers (sufficiently high for good noise suppression) without boundary layer flow separation and with good total pressure recovery. A new method for evaluating the turbulent boundary layer was developed to separate the boundary layer from the inviscid core flow, which is characterized by a total pressure variation from hub to tip, and to determine the experimental boundary layer parameters
GAMMA-CONVERGENT PROJECTION-FREE FINITE ELEMENT METHODS FOR NEMATIC LIQUID CRYSTALS: THE ERICKSEN MODEL
The Ericksen model for nematic liquid crystals couples a director field with a scalar degree of orientation variable and allows the formation of various defects with finite energy. We propose a simple but novel finite element approximation of the problem that can be implemented easily within standard finite element packages. Our scheme is projection-free and thus circumvents the use of weakly acute meshes, which are quite restrictive in three dimensions but are required by recent algorithms for convergence. We prove stability and Γ-convergence properties of the new method in the presence of defects. We also design an effective nested gradient flow algorithm for computing minimizers that controls the violation of the unit-length constraint of the director. We present several simulations in two and three dimensions that document the performance of the proposed scheme and its ability to capture quite intriguing defects
First principles theory of fluctuations in vortex liquids and solids
Consistent perturbation theory for thermodynamical quantities in type II
superconductors in magnetic field at low temperatures is developed. It is
complementary to the existing expansion valid at high temperatures.
Magnetization and specific heat are calculated to two loop order and compare
well to existing Monte Carlo simulations and experiments.Comment: 3 .ps fig. In press Phys. Rev.
- …