176 research outputs found

    Demonstration of the synchrotron-type spectrum of laser-produced Betatron radiation

    Get PDF
    Betatron X-ray radiation in laser-plasma accelerators is produced when electrons are accelerated and wiggled in the laser-wakefield cavity. This femtosecond source, producing intense X-ray beams in the multi kiloelectronvolt range has been observed at different interaction regime using high power laser from 10 to 100 TW. However, none of the spectral measurement performed were at sufficient resolution, bandwidth and signal to noise ratio to precisely determine the shape of spectra with a single laser shot in order to avoid shot to shot fluctuations. In this letter, the Betatron radiation produced using a 80 TW laser is characterized by using a single photon counting method. We measure in single shot spectra from 8 to 21 keV with a resolution better than 350 eV. The results obtained are in excellent agreement with theoretical predictions and demonstrate the synchrotron type nature of this radiation mechanism. The critical energy is found to be Ec = 5.6 \pm 1 keV for our experimental conditions. In addition, the features of the source at this energy range open novel perspectives for applications in time-resolved X-ray science.Comment: 5 pages, 4 figure

    Enhanced He-alpha emission from "smoked" Ti targets irradiated with 400nm, 45 fs laser pulses

    Get PDF
    We present a study of He-like 1s(2)-1s2p line emission from solid and low-density Ti targets under similar or equal to 45 fs laser pulse irradiation with a frequency doubled Ti: Sapphire laser. By varying the beam spot, the intensity on target was varied from 10(15) W/cm(2) to 10(19) W/cm(2). At best focus, low density "smoked" Ti targets yield similar to 20 times more He-alpha than the foil targets when irradiated at an angle of 45 degrees with s-polarized pulses. The duration of He-alpha emission from smoked targets, measured with a fast streak camera, was similar to that from Ti foils

    Universal phase transitions of B1 structured stoichiometric transition-metal carbides

    Full text link
    The high-pressure phase transitions of B1-structured stoichiometric transition metal carbides (TMCs, TM=Ti, Zr, Hf, V, Nb, and Ta) were systematically investigated using ab initio calculations. These carbides underwent universal phase transitions along two novel phase-transition routes, namely, B1\rightarrowdistorted TlI (TlI')\rightarrowTlI and/or B1\rightarrowdistorted TiB (TiB')\rightarrowTiB, when subjected to pressures. The two routes can coexist possibly because of the tiny enthalpy differences between the new phases under corresponding pressures. Four new phases result from atomic slips of the B1-structured parent phases under pressure. After completely releasing the pressure, taking TiC as a representative of TMCs, only its new TlI'-type phase is mechanically and dynamically stable, and may be recovered.Comment: [email protected]

    Development of a PbWO4 Detector for Single-Shot Positron Annihilation Lifetime Spectroscopy at the GBAR Experiment

    Get PDF
    We have developed a PbWO4 (PWO) detector with a large dynamic range to measure the intensity of a positron beam and the absolute density of the ortho-positronium (o-Ps) cloud it creates. A simulation study shows that a setup based on such detectors may be used to determine the angular distribution of the emission and reflection of o-Ps to reduce part of the uncertainties of the measurement. These will allow to improve the precision in the measurement of the cross-section for the (anti)hydrogen formation by (anti)proton-positronium charge exchange and to optimize the yield of antihydrogen ion which is an essential parameter in the GBAR experiment

    Structure of 13Be probed via quasi-free scattering

    Get PDF
    International audienceWe present an investigation of the structure of 13 Be obtained via a kinematically complete measurement of the (p,pn) reaction in inverse kinematics at 265 MeV/nucleon. The relative energy spectrum of 13 Be is compared to Transfer-to-the-Continuum calculations which use as structure inputs the overlaps of the 14 Be ground-state wave function, computed in a three-body model, with the unbound states of the 13 Be residual nucleus. The key role of neutron p -wave orbital in the interpretation of the low-relative-energy part of the spectrum is discussed

    Mass, Spectroscopy, and Two-Neutron Decay of Be 16

    Get PDF
    The structure and decay of the most neutron-rich beryllium isotope, Be16, has been investigated following proton knockout from a high-energy B17 beam. Two relatively narrow resonances were observed for the first time, with energies of 0.84(3) and 2.15(5) MeV above the two-neutron decay threshold and widths of 0.32(8) and 0.95(15) MeV, respectively. These were assigned to be the ground (Jπ=0+) and first excited (2+) state, with Ex=1.31(6) MeV. The mass excess of Be16 was thus deduced to be 56.93(13) MeV, some 0.5 MeV more bound than the only previous measurement. Both states were observed to decay by direct two-neutron emission. Calculations incorporating the evolution of the wave function during the decay as a genuine three-body process reproduced the principal characteristics of the neutron-neutron energy spectra for both levels, indicating that the ground state exhibits a strong spatially compact dineutron component, while the 2+ level presents a far more diffuse neutron-neutron distribution

    Application of compact laser-driven accelerator X-ray sources for industrial imaging

    Get PDF
    X-rays generated by betatron oscillations of electrons in a laser-driven plasma accelerator were characterised and applied to imaging industrial samples. With a 125TW laser, a low divergence beam with 5.2±1.7 × 107photonsmrad−2 per pulse was produced with a synchrotron spectrum with a critical energy of 14.6±1.3keV. Radiographs were obtained of a metrology test sample, battery electrodes, and a damage site in a composite material. These results demonstrate the suitability of the source for non-destructive evaluation applications. The potential for industrial implementation of plasma accelerators is discussed
    corecore