Superior Performance of Magnetic Nanoparticles for Entrapment and Fixation of Bovine Serum Albumin In-Vitro

BACKGROUND: In recent years, extensive studies have been performed on magnetite nanoparticles (MNPs) and their applications, which have shown the current project to be one of the major applications by laboratory results.METHODS: The nanoparticles synthesized in this project were deposited by the co-precipitation method, which structure was identified by analyzers such as SEM, FT-IR, and EDX. The aim of this project is the adsorption and fixation of biomolecule (BSA (bovine serum albumin) protein on the surface of magnetic nanoparticles.RESULTS: The adsorption results by electrophoresis and spectrophotometric analyzers showed an absorption rate above 55% ie; 55% of the protein is fixed on the MNPs nanoparticles. This absorption is due to the high level of functionality of magnetic nanoparticles for adsorption of protein. The results of the EDX analysis also show the possible electrostatic bonding between the nanoparticles and the protein, this is derived from –OH with –NH2 groups of the nanobiocompound (MNPs /protein). After bonding, the two are easily separated.CONCLUSION: In this project, the Fe3O4 nanoparticles was synthesized and identified by SEM, FT-IR, and EDX analyzers and finally reacted with the BSA protein (for the absorption of protein on MNPs) under experimental conditions at a standard temperature of 25° C. The results showed that about 55% of the protein was fixed on magnetic nanoparticles

Sulfonic-based precursors (SAPs) for silica mesostructures: Advances in synthesis and applications

Sulfonic acid-based precursors (SAP) play an important role in tailoring mesoporous silica’s and convert them to a solid acid catalyst with a Bronsted-type nature. These kinds of solid acids contribute to sustainable and green chemistry by their heterogeneous, recyclable, and high efficiency features. Therefore, knowing the properties and reactivity of SAPs can guide us to manufacture a sulfonated mesostructures compatible with reaction type and conditions. In the present review, some of the important SAPs, their reactivity and mechanism of functionalization are discussed

Intelligent Protection Scheme of Electrical Energy Distribution Systems in the presence of Distributed Generation Sources using Agent-Based Distributed Controller

The ever-increasing of renewable distributed generation sources in distribution networks, as well as increasing network size, have faced agent-based protection schemes with a heavy communicational load. Accordingly, despite the fast and reliable nature of multi-agent systems, they have the possibility of improper performance, especially in centralized protection systems. This paper presents an intelligent self-healing method that has the ability to replace common multi-agent systems during fault conditions. Therefore, protection tasks are performed in a single control level, without dependence on higher communicational levels, to clear the fault. Decentralized operation of this structure is provided by using intelligent electronic devices and distributed communications. In this way, the proposed scheme is described with high-speed peer-to-peer communication capability using the IEC-61850 GOOSE protocol. Then, a penetration-free algorithm, without the help of a central controller, is provided by using GOOSE message capabilities, to prevent any electricity interruption due to insufficient protection settings. Finally, by planning different scenarios and simulating a practical distribution network via ETAP software, the accuracy of the proposed algorithm has been proven

Silica-Supported Co3O4 Nanoparticles as a Recyclable Catalyst for Rapid Degradation of Azodye

In this paper, silica nanoparticles with particle size of ~ 10-20 nm were selected as a support for the synthesis of Co3O4 nanoparticles by impregnation of silica nanoparticles in solution of Co(II) in a specific concentrations and then calcination to 800 oC. This nanocomposite was then, used as a catalyst for oxidative degradation of methyl orange (MO) with ammonium persulfate in aqueous media. Effect of pH, temperature, contact time, amount of oxidant and catalyst were studied in the presence of manuscript. Scanning electron microscope (SEM), electron dispersive spectroscopy (EDS), FT-IR, and ICP-AES analyses were used for analysis of silica-supported Co3O4 (Co3O4/SiO2). Treating MO with ammonium persulfate in the presence of Co3O4/SiO2 led to complete degradation of MO under the optimized conditions. Also, the catalyst exhibited recyclability at least over 10 consecutive runs.

Synthesis of biological based hennotannic acid-based salts over porous bismuth coordination polymer with phosphorous acid tags

In this paper, a novel porous polymer capable of coordinating to bismuth (PCPs-Bi) was synthesized. The Bi-PCPs was then reacted with phosphorous acid to produce a novel polymer PCPs(Bi)N(CH(2)PO(3)H(2))(2) which is shown to act as an efficient and recyclable catalyst. The mentioned catalyst was applied for the efficient synthesis of new mono and bis naphthoquinone-based salts of piperidine and/or piperazine via the reaction of hennotannic acid with various aldehydes, piperidine and/or piperazine, respectively. The structure of the resulting mono and bis substituted piperazine or piperidine-based naphthoquinone salts was thoroughly characterized spectroscopically. The electrochemical behavior of the products was also investigated. The presented protocol has the advantages of excellent yields (82–95%), short reaction times (4–30 min) and simple work-up

Layer‐Wise Titania Growth Within Dimeric Organic Functional Group Viologen Periodic Mesoporous Organosilica as Efficient Photocatalyst for Oxidative Formic Acid Decomposition

A bridge dimeric organic functional group viologen PMOs synthesized via layer by layer growth on titania (TiO2) has been unprecedently prepared as stable periodic mesoporous organosilica using surfactant under mild acidic conditions. The layer by layer TiO2 incorporation within the prepared organic functional group viologen‐PMO could successfully develop a new type of hybrid photo‐oxidation system for the mineralization of formic acid under sunlight irradiation conditions.The authors are thankful for financial supports (95849156) from Iran National foundation of Science (INSF). The publication has been prepared with support from RUDN University Program 5–100

Sensitive and selective electrochemical detection of bisphenol A based on SBA-15 like Cu-PMO modified glassy carbon electrode

This work reports the electrochemical detection of bisphenol A (BPA) using a novel and sensitive electrochemical sensor based on the Cu functionalized SBA-15 like periodic mesoporous organosilica-ionic liquid composite modified glassy carbon electrode (Cu@TU-PMO/IL/GCE). The structural morphology of Cu@TU-PMO is characterized by X-ray powder diffraction (XRD), energy dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), Field emission scanning electron microscopy (FESEM), and Brunauer-Emmett-Teller (BET). The catalytic activity of the modified electrode toward oxidation of BPA was interrogated with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) in phosphate buffer solution (pH 7.0) using the fabricated sensor. The electrochemical detection of the analyte was carried out at a neutral pH and the scan rate studies revealed that the sensor was stable. Under the optimal conditions, a linear range from 5.0 nM to 2.0 mu M and 4.0 to 500 mu M for detecting BPA was observed with a detection limit of 1.5 nM (S/N = 3). The sensor was applied to detect BPA in tap and seawater samples, and the accuracy of the results was validated by high-performance l