Derivation of the probability distribution function for the local density of states of a disordered quantum wire via the replica trick and supersymmetry

We consider the statistical properties of the local density of states of a one-dimensional Dirac equation in the presence of various types of disorder with Gaussian white-noise distribution. It is shown how either the replica trick or supersymmetry can be used to calculate exactly all the moments of the local density of states. Careful attention is paid to how the results change if the local density of states is averaged over atomic length scales. For both the replica trick and supersymmetry the problem is reduced to finding the ground state of a zero-dimensional Hamiltonian which is written solely in terms of a pair of coupled ``spins'' which are elements of u(1,1). This ground state is explicitly found for the particular case of the Dirac equation corresponding to an infinite metallic quantum wire with a single conduction channel. The calculated moments of the local density of states agree with those found previously by Al'tshuler and Prigodin [Sov. Phys. JETP 68 (1989) 198] using a technique based on recursion relations for Feynman diagrams.Comment: 39 pages, 1 figur

Exploring the challenges of implementing e-health: a protocol for an update of a systematic review of reviews.

There is great potential for e-health to deliver cost-effective, quality healthcare and spending on e-health systems by governments and healthcare systems is increasing worldwide. However, the literature often describes problematic and unsuccessful attempts to implement these new technologies into routine clinical practice. To understand and address the challenges of implementing e-health, a systematic review was conducted in 2009, which identified several conceptual barriers and facilitators to implementation. As technology is rapidly changing and new e-health solutions are constantly evolving to meet the needs of current practice, an update of this review is deemed necessary to understand current challenges to the implementation of e-health. This research aims to identify, summarise and synthesise currently available evidence, by undertaking a systematic review of reviews to explore the barriers and facilitators to implementing e-health across a range of healthcare settings

The selection, appraisal and retention of digital scientific data: dighlights of an ERPANET/CODATA workshop

CODATA and ERPANET collaborated to convene an international archiving workshop on the selection, appraisal, and retention of digital scientific data, which was held on 15-17 December 2003 at the Biblioteca Nacional in Lisbon, Portugal. The workshop brought together more than 65 researchers, data and information managers, archivists, and librarians from 13 countries to discuss the issues involved in making critical decisions regarding the long-term preservation of the scientific record. One of the major aims for this workshop was to provide an international forum to exchange information about data archiving policies and practices across different scientific, institutional, and national contexts. Highlights from the workshop discussions are presented

A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs

Recent government sponsored research has demonstrated that there is a gap between the theory and practice of market intelligence gathering within the Australian micro, small and medium businesses (SMEs). Typically, there is a significant amount of information in literature about 'what needs to be done', however, there is little insight in terms of how market intelligence gathering should occur. This paper provides a novel insight and a comparison between the theory and practices of market intelligence gathering of micro-business and SMEs in Australia and demonstrates an anomoly in so far as typically the literature does not match what actually occurs in practice. A model for market intelligence gathering for micro-businesses and SMEs is also discussed

A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs

Recent government sponsored research has demonstrated that there is a gap between the theory and practice of market intelligence gathering within the Australian micro, small and medium businesses (SMEs). Typically, there is a significant amount of information in literature about 'what needs to be done', however, there is little insight in terms of how market intelligence gathering should occur. This paper provides a novel insight and a comparison between the theory and practices of market intelligence gathering of micro-business and SMEs in Australia and demonstrates an anomoly in so far as typically the literature does not match what actually occurs in practice. A model for market intelligence gathering for micro-businesses and SMEs is also discussed

Modelling the effect of vertical mixing on bottle incubations for determining in situ phytoplankton dynamics. I. Growth rates

Reliable estimates of in situ phytoplankton growth rates are central to understanding the dynamics of aquatic ecosystems. A common approach for estimating in situ growth rates is to incubate natural phytoplankton assemblages in clear bottles at fixed depths or irradiance levels and measure the change in chlorophyll a (Chl) over the incubation period (typically 24 h). Using a modelling approach, we investigate the accuracy of these Chl-based methods focussing on 2 aspects: (1) in a freely mixing surface layer, the cells are typically not in balanced growth, and with photoacclimation, changes in Chl may yield different growth rates than changes in carbon; and (2) the in vitro methods neglect any vertical movement due to turbulence and its effect on the cells' light history. The growth rates thus strongly depend on the incubation depth and are not necessarily representative of the depth-integrated in situ growth rate in the freely mixing surface layer. We employ an individual based turbulence and photosynthesis model, which also accounts for photoacclimation and photo - inhibition, to show that the in vitro Chl-based growth rate can differ both from its carbon-based in vitro equivalent and from the in situ value by up to 100%, depending on turbulence intensity, optical depth of the mixing layer, and incubation depth within the layer. We make recommendations for choosing the best depth for single-depth incubations. Furthermore we demonstrate that, if incubation bottles are being oscillated up and down through the water column, these systematic errors can be significantly reduced. In the present study, we focus on Chl-based methods only, while productivity measurements using carbon-based techniques (e.g. 14C) are discussed in Ross et al. (2011; Mar Ecol Prog Ser 435:33-45). © Inter-Research 2011

RascalC: A Jackknife Approach to Estimating Single and Multi-Tracer Galaxy Covariance Matrices

To make use of clustering statistics from large cosmological surveys, accurate and precise covariance matrices are needed. We present a new code to estimate large scale galaxy two-point correlation function (2PCF) covariances in arbitrary survey geometries that, due to new sampling techniques, runs $\sim 10^4$ times faster than previous codes, computing finely-binned covariance matrices with negligible noise in less than 100 CPU-hours. As in previous works, non-Gaussianity is approximated via a small rescaling of shot-noise in the theoretical model, calibrated by comparing jackknife survey covariances to an associated jackknife model. The flexible code, RascalC, has been publicly released, and automatically takes care of all necessary pre- and post-processing, requiring only a single input dataset (without a prior 2PCF model). Deviations between large scale model covariances from a mock survey and those from a large suite of mocks are found to be be indistinguishable from noise. In addition, the choice of input mock are shown to be irrelevant for desired noise levels below $\sim 10^5$ mocks. Coupled with its generalization to multi-tracer data-sets, this shows the algorithm to be an excellent tool for analysis, reducing the need for large numbers of mock simulations to be computed.Comment: 29 pages, 8 figures. Accepted by MNRAS. Code is available at http://github.com/oliverphilcox/RascalC with documentation at http://rascalc.readthedocs.io

Multi-Temperature Blackbody Spectra of Thin Accretion Disks With and Without a Zero-Torque Inner Boundary Condition

The standard spectral model for analyzing the soft component of thermal emission from a thin accretion disk around a black hole is the multi-temperature blackbody (MTB) model. The widely used implementation of this model, which is known as ``diskbb,'' assumes nonzero torque at the inner edge of the accretion disk. This assumption is contrary to the classic and current literature on thin-disk accretion, which advocates the use of a zero-torque boundary condition. Consequently, we have written code for a zero-torque model, ``ezdiskbb,'' which we compare to the nonzero-torque model diskbb by fitting RXTE spectra of three well-known black hole binaries: 4U 1543-47, XTE J1550-564, and GRO J1655-40. The chief difference we find is that the zero-torque model gives a value for the inner disk radius that is about 2.2 times smaller than the value given by diskbb. This result has important implications, especially for the determination of black-hole angular momentum and mass accretion rate.Comment: 27 pages, 9 figures, submitted to Ap

Design of a Multi-Moon Orbiter

The Multi-Moon Orbiter concept is introduced, wherein a single spacecraft orbits several moons of Jupiter, allowing long duration observations. The ΔV requirements for this mission can be low if ballistic captures and resonant gravity assists by Jupiter’s moons are used. For example, using only 22 m/s, a spacecraft initially injected in a jovian orbit can be directed into a capture orbit around Europa, orbiting both Callisto and Ganymede enroute. The time of flight for this preliminary trajectory is four years, but may be reduced by striking a compromise between fuel and time optimization during the inter-moon transfer phases

Summary of Toxicological Data for Aquatic Organisms of Illinois

The data presented in this report contain Information on toxicity testing performed on organisms that could be found In aquatic habitats in Illinois. To compile this information a thorough list of all aquatic organisms in Illinois was required. This was constructed through literature searches and personal communication with scientists who collect and identify Illinois aquatic specimens. Each species name was used to search a database which contained toxicity information on aquatic organisms. No toxicological Information was found for many Illinois species. For most organisms, all available information retrieved from the database is presented. For species on which extensive toxicological research has been performed, data showing 96 hour LC50 or EC50 values and chronic testing values constitute the bulk of the records. In addition to records detailing toxicity values and experimental conditions, a list of tested chemical compounds and organisms is included. Literature citing observations and identification of aquatic organisms within Illinois was the most valuable resource in compiling a list of Illinois aquatic species. Staff of the Illinois Natural History Survey were helpful in recommending the most useful publications, making available their own field lists, and helping to update taxonomy and nomenclature from older reports. In particular we would like to acknowledge Don Webb, Larry Page, Warren Brigham, Mark Wetzel, Kevin Cummings, and Allison Brigham from the INHS Faunistics section and Michael Henebry from the section of Aquatic Biology. To retrieve toxicity data on the aquatic organisms of Illinois, a Chemical Information System, Inc. database, AQUIRE (Aquatic Information Retrieval System), was employed. AQUIRE contains data extracted from publications dealing with the toxic effects of chemical substances on aquatic organisms. Each Latin species name from the compiled Illinois list was used to search records in the database. If AQUIRE matched a record with the species name, the record was stored. If there were an excessive number of matching records, the search was narrowed by specifying particular regimens and/or effective endpoint types. Ultimately a printout of the records pertaining to each organism was produced. The data contained In this report are duplications of the AQUIRE records obtained for Illinois organisms. The taxonomy, habitat, and Illinois distribution is listed immediately preceding the AQUIRE records compiled for each species. These records have been substantially reduced from their original size and are arranged by chemical compound in alphabetical and/or numerical order.published or submitted for publicationis peer reviewe