Low-cost 3D printed lenses for brightfield and fluorescence microscopy

We present the fabrication and implementation of low-cost optical quality 3D printed lenses, and their application as microscope objectives with different prescriptions. The imaging performance of the 3D printed lenses was benchmarked against commercially available optics including a 20 mm focal length 12.7 mm diameter NBK-7 plano-convex lens used as a low magnification objective, and a separate high magnification objective featuring three 6 mm diameter NBK-7 lenses with different positive and negative focal lengths. We describe the design and manufacturing processes to produce high-quality 3D printed lenses. We tested their surface quality using a stylus profilometer, showing that they conform to that of commercial glass counterpart lenses. The 3D printed lenses were used as microscope objectives in both brightfield and epi-fluorescence imaging of specimens including onion, cyanobacteria, and variegated Hosta leaves, demonstrating a sub-cellular resolution performance obtained with low-cost 3D printed optical elements within brightfield and fluorescence microscopy

Low-cost 3D printed lenses for brightfield and fluorescence microscopy

We present the fabrication and implementation of low-cost optical quality 3D printed lenses, and their application as microscope objectives with different prescriptions. The imaging performance of the 3D printed lenses was benchmarked against commercially available optics including a 20 mm focal length 12.7 mm diameter NBK-7 plano-convex lens used as a low magnification objective, and a separate high magnification objective featuring three 6 mm diameter NBK-7 lenses with different positive and negative focal lengths. We describe the design and manufacturing processes to produce high-quality 3D printed lenses. We tested their surface quality using a stylus profilometer, showing that they conform to that of commercial glass counterpart lenses. The 3D printed lenses were used as microscope objectives in both brightfield and epi-fluorescence imaging of specimens including onion, cyanobacteria, and variegated Hosta leaves, demonstrating a sub-cellular resolution performance obtained with low-cost 3D printed optical elements within brightfield and fluorescence microscopy

Optimising mechanical separation of anaerobic digestate for total solids and nutrient removal

Publication history: Accepted - 16 June 2023; Published - 28 June 2023.Mechanical separation of anaerobic digestate has been identified as a method to reduce pollution risk to waterways by partitioning phosphorus in the solid fraction and reducing its application to land. Separators have adjustable parameters which affect separation efficiency, and hence the degree of phosphorous partitioning, but information on how these parameters affect separation performance is limited in the literature. Two well known technologies were investigated, decanter centrifuge and screw press, to determine the most efficient method of separation. Counterweight load and the use of an oscillator were adjusted for the screw press, while bowl speed, auger differential speed, feed rate and polymer addition were modified for the decanter centrifuge. Separation efficiency was determined for total solids, phosphorus, nitrogen, potassium, and carbon, and the total solids content of resulting fractions was measured. The decanter centrifuge had higher separation efficiency for phosphorus in all cases, ranging from 51% to 71.5%, while the screw press had a phosphorus separation efficiency ranging from 8.5% to 10.9% for digestate of ~5% solids (slurry/grass silage mix). Separation by decanter centrifuge partitioned up to 56% of nitrogen in the solid fraction leaving a reduced nitrogen content in the liquid fraction available for land spreading; this nitrogen would most likely need to be replaced by chemical fertiliser which would add to the cost of the system. The decanter centrifuge is better suited to cases where phosphorus recovery is the most important factor, while the screw press could be advantageous in cases where cost is a limiting factor.This project was supported by The Bryden Centre. The Bryden Centre project is supported by the European Union’s INTERREG VA Programme, managed by the Special EU Programmes Body (SEUPB). The views and opinions expressed in this paper do not necessarily reflect those of the European Commission or the Special EU Programmes Body (SEUPB). The work was also supported by Queen’s University Belfast and the Agri-Food and Biosciences Institute in Northern Ireland

An economic analysis of anaerobic digestate fuel pellet production: can digestate fuel pellets add value to existing operations?

Publication history: Accepted - 9 April 2021; Published online - 16 April 2021.Anaerobic digestion provides renewable energy through waste valorisation, but the digestate by-product is underutilised and presents a risk to water quality. Mechanical separation partitions phosphorous into the solid fraction and further processing into a fuel pellet can provide an additional source of energy and revenue. Previous economic analyses looked only at aspects of the system (e.g. operational costs solely) and the system requires further investigation to determine viability. In this paper, an economic assessment of digestate fuel pellet production at farm-scale anaerobic digestion plants was carried out. The significance of this work is to provide a comprehensive assessment of the energy, phosphorous, and economic balances involved in digestate fuel pellet production at existing anaerobic digestion plants. The aim of this paper is to determine the financial viability of digestate fuel pellet production with objectives to compare two mechanical separation technologies: screw press, and decanting centrifuge. Economies of scale hold true for digestate pellet production and the available digestate in typical UK farm-based anaerobic digestion plants ( 500 kWe) is insufficient for profitability, with pellet production costing from £176/t (decanting centrifuge) to £215/t (screw press), compared to a typical wood pellet sale price of £185/t. Increasing digestate quantity by collaboration of plant operators can reduce the cost of pellet production to between £95/t and £121/t, improving financial viability and increasing the profit per head of cattle by 9–20% on a typical dairy farm utilising anaerobic digestion. The system has potential to aid rural development while also protecting the environment and contributing to the diversification of energy supply.This project was supported by The Bryden Centre. The Bryden Centre project is supported by the European Union’s INTERREG VA Programme, managed by the Special EU Programmes Body (SEUPB). The views and opinions expressed in this paper do not necessarily reflect those of the European Commission or the Special EU Programmes Body (SEUPB). The work was also supported by Queen’s University Belfast and the Agri-Food and Biosciences Institute in Northern Ireland

Effect of anaerobic digestate fuel pellet production on Enterobacteriaceae and Salmonella persistence

Publication history: Accepted - 10 June 2022; Published online - 7 July 2022.Production of digestate pellets for fuel has been identified as a promising circular economy approach to provide renewable energy and additional income to farms, while at the same time presenting the potential to divert raw digestate from nutrient-saturated land and reduce the risk to water quality. Although previous research has investigated the feasibility of pellet production, there has been little focus on the bio-safety aspects of the system. Little is currently known about the persistence of bacteria present in the digestate and the potential impacts on human health for those handling this product. The aim of the present research was to determine the effect that each step in the pellet production process has on bacteria numbers: anaerobic digestion, mechanical separation, solid drying, and pelletisation. Enterobacteriaceae enumeration by colony count method was used to quantify bacteria, and the presence of Salmonella at each stage was determined. The Enterobacteriaceae count reduced with each stage, and the final pelletisation step reduced bacteria numbers to below detectable levels (<10 colony forming units/g). Salmonella was only detected in the starting slurry and absent from digestate onwards. Storage of the pellets under winter and simulated summer conditions showed no reactivation of Enterobacteriaceae over time. The pelletisation process produces a digestate product with Enterobacteriaceae counts below the maximum threshold (PAS110 specification) for transport off the source farm, but care must still be taken when handling digestate pellets as complete sterilisation has not been confirmed.This project was supported by The Bryden Centre. The Bryden Centre project is supported by the European Union's INTERREG VA Programme, managed by the Special EU Programmes Body (SEUPB). The work was also supported by Queen's University Belfast and the Agri-Food and Biosciences Institute in Northern Ireland

Interactions between white-tailed deer density and the composition of forest understories in the northern United States

Forest understories across the northern United States (US) are a complex of tree seedlings, endemic forbs, herbs, shrubs, and introduced plant species within a forest structure defined by tree and forest floor attributes. The substantial increase in white-tailed deer (Odocoileus virginianus Zimmerman) populations over the past decades has resulted in heavy browse pressure in many of these forests. To gain an objective assessment of the role of deer in forested ecosystems, a region-wide forest inventory across the northern US was examined in concert with white-tailed deer density information compiled at broad scales. Results indicate that deer density may be an additional driver of tree seedling abundance when analyzed along with stand attributes such as above ground biomass, relative density, and stand age. Tree seedling abundance generally decreased as deer density increased above 5.8 deer km2 for all forest type groups with the exception of oak-dominated forests. Findings indicate that introduced plant species, of which 393 were recorded in this study, increased in areas with higher deer density. The abundance of white-tailed deer is just as important as forest stand and site attributes in the development of forest understories. Given the complexity of forest and land use dynamics across the northern US, this study provides directions for future research as more data linking forest-dependent wildlife and forest dynamics at regional and national scales become available

“What is my risk really?”: A qualitative exploration of preventive interventions among individuals at risk of rheumatoid arthritis

Objectives Intervention in the pre-arthritis phase of rheumatoid arthritis (RA) could prevent or delay the onset of disease. The primary aim of this study was to explore perspectives of being at-risk and potential preventive interventions among individuals at risk of developing RA, and identify factors influencing their engagement with prevention. A secondary aim, established during the analysis process, was to understand and compare different approaches to health-related behaviours related to preventing RA. Methods Anti-cyclic citrullinated peptide positive at-risk (CCP+ at-risk) individuals with musculoskeletal symptoms but no synovitis participated in semi-structured interviews. Data were analysed using reflexive thematic analysis, followed by a secondary ideal-type analysis. Results Nineteen CCP+ at-risk individuals (ten women; age range 35–70) participated. Three overarching themes were identified: i) being CCP+ at risk; ii) aiming to prevent RA; iii) influencers of engagement. Participants described distress related to symptoms and uncertainty about disease progression. Many participants had concerns about medication side effects. In contrast, most participants expressed willingness to make lifestyle changes with the aim of preventing RA. Engagement with preventive measures was influenced by symptom severity, personal risk level, comorbidities, experiences of taking other medications/supplements, knowledge of RA, risk factors and medications, and perceived effort. Three ‘types’ of participants were identified from the data: proactive preventers, change considerers, and fearful avoiders. Overall orientation to health behaviours also impacted on attitude towards preventing RA. Conclusion Findings could inform recruitment and retention in RA prevention research and promote uptake of preventive interventions in clinical practice

Hygiene inspections on passenger ships in Europe - an overview

<p>Abstract</p> <p>Background</p> <p>Hygiene inspections on passenger ships are important for the prevention of communicable diseases. The European Union (EU) countries conduct hygiene inspections on passenger ships in order to ensure that appropriate measures have been taken to eliminate potential sources of contamination which could lead to the spread of communicable diseases. This study was implemented within the framework of the EU SHIPSAN project and it investigates the legislation applied and practices of hygiene inspections of passenger ships in the EU Member States (MS) and European Free Trade Association countries.</p> <p>Methods</p> <p>Two questionnaires were composed and disseminated to 28 countries. A total of 92 questionnaires were completed by competent authorities responsible for hygiene inspections (n = 48) and the creation of legislation (n = 44); response rates were 96%, and 75.9%, respectively.</p> <p>Results</p> <p>Out of the 48 responding authorities responsible for hygiene inspections, a routine programme was used by 19 (39.6%) of these to conduct inspections of ships on national voyages and by 26 (54.2%) for ships on international voyages. Standardised inspection forms are used by 59.1% of the authorities. A scoring inspection system is applied by five (11.6%) of the 43 responding authorities. Environmental sampling is conducted by 84.1% of the authorities (37 out of 44). The inspection results are collected and analysed by 54.5% (24 out of 44) of the authorities, while 9 authorities (20.5%) declared that they publish the results. Inspections are conducted during outbreak investigations by 75% and 70.8% of the authorities, on ships on national and international voyages, respectively. A total of 31 (64.6%) and 39 (81.3%) authorities conducted inspections during complaint investigations on ships on international and on national voyages, respectively. Port-to-port communication between the national port authorities was reported by 35.4% (17 out of 48) of the responding authorities and 20.8% (10 out of 48) of the port authorities of other countries.</p> <p>Conclusion</p> <p>This study revealed a diversity of approaches and practices in the conduct of inspections, differences in the qualifications/knowledge/experience of inspectors, the legislation applied during inspections, and the lack of communication and training among many EU countries. An integrated European inspection programme involving competent expert inspectors in each EU Member States and special training for ship hygiene delivered to crew members and inspectors would help to minimize the risk of communicable diseases. Common inspection tools at a European level for hygiene inspection practices and port-to-port communication are needed.</p

Investigating the mechanism of acoustically activated uptake of drugs from Pluronic micelles

BACKGROUND: This paper examines the mechanism of ultrasonic enhanced drug delivery from Pluronic micelles. In previous publications by our group, fluorescently labeled Pluronic was shown to penetrate HL-60 cells with and without the action of ultrasound, while drug uptake was increased with the application of ultrasound. METHODS: In this study, the amount of uptake of two fluorescent probes, Lysosensor Green (a pH-sensitive probe) and Cell Tracker Orange CMTMR (a pH-independent probe), was measured in HL-60 and HeLa cells. RESULTS: The results of our experiments show that the increase in drug accumulation in the cells as a result of ultrasonication is not due to an increase in endocytosis due to ultrasonication. CONCLUSIONS: We hypothesize that sonoporation plays an important role in the acoustically activated drug delivery of chemotherapy drugs delivered from Pluronic micelles

B844: Checklist of the Vascular Plants of Maine Third Revision

This is the third revision of the Checklist of Vascular Plants of Maine. Like its predecessors, it lists all ferns and related plants, conifers, and flowering plants native and naturalized in Maine and records their county-level distribution in the state. The first Check- list (Ogden et al. 1948) was based on specimens in herbaria at the University of Maine (hereafter referred to as MAINE), Portland Society of Natural History, New England Botanical Club, Gray Herbarium of Harvard University, and the private collection of Glen D. Chamberlain of Presque Isle, Maine (now part of MAINE). Bean et al. (1966) revised the checklist to include additions to the flora and update the nomenclature to follow Fernald (1950). Richards et al. (1983) added many new state and county records in the second revision. The purpose of this revision is twofold. First, we have included many new county and state records. Since Richards et al. (1983) there has been considerable collecting in Maine, much of it directed at searching for new state and county records in relatively neglected regions of the state. Second, there have been numerous changes in the scientific names of Maine plants since Fernald (1950), the nomenclatural basis of Richards et al. (1983). We have largely followed Kartesz\u27s (1994) nomenclature (see Taxonomy and Nomenclature section). Recent work on rare plants and establishment of an official list of endangered and threatened plants in Maine (Dibble et al. 1989; Maine State Planning Office 1990) also motivate updating the known distribution and taxonomy of Maine\u27s flora.https://digitalcommons.library.umaine.edu/aes_bulletin/1121/thumbnail.jp