35 research outputs found
In situ cloud ground-based measurements in the Finnish sub-Arctic : intercomparison of three cloud spectrometer setups
Continuous, semi-long-term, ground-based in situ cloud measurements were conducted during the Pallas Cloud Experiment (PaCE) in 2013. The measurements were carried out in Finnish sub-Arctic region at Sammaltunturi station (67 degrees 58 ' N, 24 degrees 07 ' E; 560m a.s.l.), part of Pallas Atmosphere - Ecosystem Supersite and Global Atmosphere Watch (GAW) program. The main motivation of the campaign was to conduct in situ cloud measurements with three different cloud spectrometer probes and perform an evaluation of their ground-based setups. Therefore, we mutually compared the performance of the cloud and aerosol spectrometer (CAS), the cloud droplet probe (CDP) and the forward-scattering spectrometer probe (FSSP-100) (DMT; Boulder, CO, USA). We investigated how different meteorological parameters affect each instrument's ground-based setup operation and quantified possible biases and discrepancies of different microphysical cloud properties. Based on the obtained results we suggested limitations for further use of the instrument setups in campaigns where the focus is on investigating aerosol-cloud interactions. Measurements in this study were made by instruments owned by the Finnish Meteorological Institute and results concern their operation in sub-Arctic conditions with frequently occurring supercooled clouds. The measured parameter from each instrument was the size distribution, and additionally we derived the number concentration, the effective diameter, the median volume diameter and the liquid water content. A complete intercomparison between the CAS probe and the FSSP-100 ground setups and additionally between the FSSP-100 and the CDP probe ground setups was made and presented. Unfortunately, there was not a sufficient amount of common data to compare all three probes together due to operational problems of the CDP ground setup in sub-zero conditions. The CAS probe that was fixed to one direction lost a significant number of cloud droplets when the wind direction was out of wind iso-axial conditions in comparison with the FSSP-100 and the CDP, which were both placed on a rotating platform. We revealed that CAS and FSSP-100 had good agreement in deriving sizing parameters (effective diameter and median volume diameter from 5 to 35 mu m) even though CAS was losing a significant amount of cloud droplets. The most sensitive derived parameter was liquid water content, which was strongly connected to the wind direction and temperature.Peer reviewe
Recommended from our members
Profiling water vapor mixing ratios in Finland by means of a Raman lidar, a satellite and a model
We present tropospheric water vapor profiles measured with a Raman lidar during three field campaigns held in Finland. Co-located radio soundings are available throughout the period for the calibration of the lidar signals. We investigate the possibility of calibrating the lidar water vapor profiles in the absence of co-existing on-site soundings using water vapor profiles from the combined Advanced InfraRed Sounder (AIRS) and the Advanced Microwave Sounding Unit (AMSU) satellite product; the Aire Limitée Adaptation dynamique Développement INternational and High Resolution Limited Area Model (ALADIN/HIRLAM) numerical weather prediction (NWP) system, and the nearest radio sounding station located 100 km away from the lidar site (only for the permanent location of the lidar). The uncertainties of the calibration factor derived from the soundings, the satellite and the model data are < 2.8, 7.4 and 3.9 %, respectively. We also include water vapor mixing ratio intercomparisons between the radio soundings and the various instruments/model for the period of the campaigns. A good agreement is observed for all comparisons with relative errors that do not exceed 50 % up to 8 km altitude in most cases. A 4-year seasonal analysis of vertical water vapor is also presented for the Kuopio site in Finland. During winter months, the air in Kuopio is dry (1.15±0.40 †kg-1); during summer it is wet (5.54±1.02 †kg-1); and at other times, the air is in an intermediate state. These are averaged values over the lowest 2 km in the atmosphere. Above that height a quick decrease in water vapor mixing ratios is observed, except during summer months where favorable atmospheric conditions enable higher mixing ratio values at higher altitudes. Lastly, the seasonal change in disagreement between the lidar and the model has been studied. The analysis showed that, on average, the model underestimates water vapor mixing ratios at high altitudes during spring and summer
UCLALES–SALSA v1.0: a large-eddy model with interactive sectional microphysics for aerosol, clouds and precipitation
Challenges in understanding the aerosol–cloud interactions and their impacts
on global climate highlight the need for improved knowledge of the underlying
physical processes and feedbacks as well as their interactions with cloud and
boundary layer dynamics. To pursue this goal, increasingly sophisticated
cloud-scale models are needed to complement the limited supply of
observations of the interactions between aerosols and clouds. For this
purpose, a new large-eddy simulation (LES) model, coupled with an interactive
sectional description for aerosols and clouds, is introduced. The new model
builds and extends upon the well-characterized UCLA Large-Eddy Simulation
Code (UCLALES) and the Sectional Aerosol module for Large-Scale Applications
(SALSA), hereafter denoted as UCLALES-SALSA. Novel strategies for the
aerosol, cloud and precipitation bin discretisation are presented. These
enable tracking the effects of cloud processing and wet scavenging on the
aerosol size distribution as accurately as possible, while keeping the
computational cost of the model as low as possible. The model is tested with
two different simulation set-ups: a marine stratocumulus case in the
DYCOMS-II campaign and another case focusing on the formation and evolution
of a nocturnal radiation fog. It is shown that, in both cases, the
size-resolved interactions between aerosols and clouds have a critical
influence on the dynamics of the boundary layer. The results demonstrate the
importance of accurately representing the wet scavenging of aerosol in the
model. Specifically, in a case with marine stratocumulus, precipitation and
the subsequent removal of cloud activating particles lead to thinning of the
cloud deck and the formation of a decoupled boundary layer structure. In
radiation fog, the growth and sedimentation of droplets strongly affect their
radiative properties, which in turn drive new droplet formation. The
size-resolved diagnostics provided by the model enable investigations of
these issues with high detail. It is also shown that the results remain
consistent with UCLALES (without SALSA) in cases where the dominating
physical processes remain well represented by both models
Recommended from our members
Optical and geometrical aerosol particle properties over the United Arab Emirates
One year of ground-based night-time Raman lidar observations has been analysed under the Optimization of Aerosol Seeding In rain enhancement Strategies (OASIS) project, in order to characterize the aerosol particle properties over a rural site in the United Arab Emirates. In total, 1130 aerosol particle layers were detected during the 1-year measurement campaign which took place between March 2018 and February 2019. Several subsequent aerosol layers could be observed simultaneously in the atmosphere up to 11 km. The observations indicate that the measurement site is a receptor of frequent dust events, but predominantly the dust is mixed with aerosols of anthropogenic and/or marine origin. The mean aerosol optical depth over the measurement site ranged at 0.37±0.12 and 0.21±0.11 for 355 and 532 nm, respectively. Moreover, mean lidar ratios of 43±11 sr at a wavelength of 355 nm and 39±10 sr at 532 nm were found. The average linear particle depolarization ratio measured over the course of the campaign was 15±6% and 19±7% at the 355 and 532 nm wavelengths, respectively. Since the region is both a source and a receptor of mineral dust, we have also explored the properties of Arabian mineral dust of the greater area of the United Arab of Emirates and the Arabian Peninsula. The observed Arabian dust particle properties were 45±5 (42±5) sr at 355 (532) nm for the lidar ratio, 25±2% (31±2 %) for the linear particle depolarization ratio at 355 (532) nm, and 0.3±0.2 (0.2±0.2) for the extinction-related Angstrom exponent (backscatterrelated Angstrom exponent) between 355 and 532 nm. This study is the first to report comprehensive optical properties of the Arabian dust particles based on 1-year long observations, using to their fullest the capabilities of a multi-wavelength Raman lidar instrument. The results suggest that the mineral dust properties over the Middle East and western Asia, including the observation site, are comparable to those of African mineral dust with regard to the particle depolarization ratios, but not for lidar ratios. The smaller lidar ratio values in this study compared to the reference studies are attributed to the difference in the geochemical characteristics of the soil originating in the study region compared to northern Africa. © 2020 Royal Society of Chemistry. All rights reserved
Adsorptive uptake of water by semisolid secondary organic aerosols
Aerosol climate effects are intimately tied to interactions with water. Here we combine hygroscopicity measurements with direct observations about the phase of secondary organic aerosol (SOA) particles to show that water uptake by slightly oxygenated SOA is an adsorption-dominated process under subsaturated conditions, where low solubility inhibits water uptake until the humidity is high enough for dissolution to occur. This reconciles reported discrepancies in previous hygroscopicity closure studies. We demonstrate that the difference in SOA hygroscopic behavior in subsaturated and supersaturated conditions can lead to an effect up to about 30% in the direct aerosol forcinghighlighting the need to implement correct descriptions of these processes in atmospheric models. Obtaining closure across the water saturation point is therefore a critical issue for accurate climate modeling.Peer reviewe
The Center of Excellence in Atmospheric Science (2002–2019) — from molecular and biological processes to the global climate
The study of atmospheric processes related to climate requires a multidisciplinary approach, encompassing physics, chemistry, meteorology, forest science, and environmental science. The Academy of Finland Centre of Excellence in atmospheric sciences (CoE ATM) responded to that need for 18 years and produced extensive research and eloquent results, which are summarized in this review. The work in the CoE ATM enhanced our understanding in biogeochemical cycles, ecosystem processes, dynamics of aerosols, ions and neutral clusters in the lower atmosphere, and cloud formation and their interactions and feedbacks. The CoE ATM combined continuous and comprehensive long-term in-situ observations in various environments, ecosystems and platforms, ground- and satellitebased remote sensing, targeted laboratory and field experiments, and advanced multi-scale modeling. This has enabled improved conceptual understanding and quantifications across relevant spatial and temporal scales. Overall, the CoE ATM served as a platform for the multidisciplinary research community to explore the interactions between the biosphere and atmosphere under a common and adaptive framework