A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates

This study presents a constitutive model for steels exhibiting SIMT, based on previous seminal works, and the corresponding methodology to estimate their parameters. The model includes temperature effects in the phase transformation kinetics, and in the softening of each solid phase through the use of a homogenization technique. The model was validated with experimental results of dynamic tensile tests on AISI 304 sheet steel specimens, and their predictions correlate well with the experimental evidence in terms of macroscopic stress–strain curves and martensite volume fraction formed at high strain rates. The work shows the value of considering temperature effects in the modeling of metastable austenitic steels submitted to impact conditions. Regarding most of the works reported in the literature on SIMT, modeling of the martensitic transformation at high strain rates is the distinctive feature of the present paper.The researchers of the University Carlos III of Madrid are indebted to the Comunidad Autónoma de Madrid (Project CCG10-UC3M/DPI-5596)) and to the Ministerio de Ciencia e Innovación de España (Project DPI/2008-06408) for the financial support received which allowed conducting part of this work. The authors express their thanks to Mr. Philippe and Mr. Tobisch from the company Zwick for the facilities provided to perform the tensile tests at high strain rates

A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates

This study presents a constitutive model for steels exhibiting SIMT, based on previous seminal works, and the corresponding methodology to estimate their parameters. The model includes temperature effects in the phase transformation kinetics, and in the softening of each solid phase through the use of a homogenization technique. The model was validated with experimental results of dynamic tensile tests on AISI 304 sheet steel specimens, and their predictions correlate well with the experimental evidence in terms of macroscopic stress–strain curves and martensite volume fraction formed at high strain rates. The work shows the value of considering temperature effects in the modeling of metastable austenitic steels submitted to impact conditions. Regarding most of the works reported in the literature on SIMT, modeling of the martensitic transformation at high strain rates is the distinctive feature of the present paper.The researchers of the University Carlos III of Madrid are indebted to the Comunidad Autónoma de Madrid (Project CCG10-UC3M/DPI-5596)) and to the Ministerio de Ciencia e Innovación de España (Project DPI/2008-06408) for the financial support received which allowed conducting part of this work. The authors express their thanks to Mr. Philippe and Mr. Tobisch from the company Zwick for the facilities provided to perform the tensile tests at high strain rates

Tribological behavior of oils additised with a phosphonium-derived ionic liquid compared to a commercial oil

Purpose: The purpose of this paper is to study the antifriction, antiwear and tribolayer formation properties of the trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl) phosphinate ionic liquid (IL) as additive at 1 wt.% in two base oils and their mixtures, comparing the results with those of a commercial oil. Design/methodology/approach: The mixture of the base oils used in the formulation of the commercial oil SAE 0W20 plus the IL was tested under rolling/sliding and reciprocating conditions to determine the so-called Stribeck curve, the tribolayer formation and the antifriction and antiwear behaviors. Findings: The use of this IL as additive in these oils does not change their viscosity; improves the antifriction and antiwear properties of the base oils, making equal or outperforming these properties of the SAE 0W20; and the thickness and formation rate of the tribolayer resulting from the IL-surface interaction is highly dependent on the type of base oil and influence on the friction and wear results. Originality/value: The use of this IL allows to replace partial or totally commercial antifriction and antiwear additives. Peer review: The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2020-0179/

Los jubilados franceses en España en el movimiento de inmigración de la Unión Europea : un enfoque geográfico

Ce livre regroupe les résultats de plusieurs recherches sur les retraités européens dans les régions espagnoles, menées par des chercheurs espagnols et étrangers, unis par deux liens, leur participation au réseau scientifique de la Fondation européenne de la science (ESF) sur "La migration internationale dans Europes "et son intérêt pour la migration des retraités en Europe, qui a son expression maximale en Espagne comme principale destination européenne. Les chapitres de ce livre ont été choisis en fonction de leur intérêt scientifique et de leur complémentarité thématique, afin de couvrir autant que possible les pays d’origine et les régions de destination

Numerical Simulation of the effect adiabatic temperature increase in martensitic transformation of austenitic steels

The predictions of the constitutive model agree with experimental results in terms of macroscopy stress-strain curves and volume fraction of martensite formed during loadin

Lubrication performance of an ammonium cation-based ionic liquid used as an additive in a polar oil.

This paper studies the tribological behavior of the ionic liquid methyltrioctylammonium bis(trifluoromethylsulfonyl)imide ([N 1888 ][NTf 2 ]) as additive at different concentrations (1.25, 2.50, 3.75 and 5.00 wt%) in a polar base oil (diester). A tribometer using a ball-on-disk reciprocating configuration under fully flooded lubrication was used at a frequency of 15 Hz, at three different loads (40, 80 and 120 N), stroke length of 4 mm, and duration of 45 min. Worn surface on the disk was studied by confocal microscopy, SEM and XPS. Main results showed similar coefficient of friction for all lubricant samples; but different wear results were found at different loads, probably related with the chemical states found for fluorine on the worn surface and the temperature-dependent adsorption-desorption processes

Production and Characterization of a new Copper(II) Propanoate-Isonicotinamide Adduct obtained via Slow Evaporation and using Supercritical CO2 as an Antisolvent

A new adduct of isonicotinamide (INA) with copper(II) propanoate [Cu(C3)2] was prepared [Cu2(C3)4(INA)4] using two different methods. This type of compound shows high fungicidal activity. Solvent evaporation from ethanol rendered crystals suitable for single-crystal X-ray diffraction. Furthermore, a new semicontinuous method capable of simultaneous crystallization and micronization of the adduct using supercritical CO2, the supercritical antisolvent technique (SAS), was also assessed. Crystals were characterized using powder X-ray diffraction, infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis coupled with mass spectrometry, scanning electron microscopy, and microelemental analysis. In the adduct, two copper(II) ions are coordinated through two bridging and two chelating carboxylates to the propanoate anions forming approximately a plane. Each metal ion is then coordinated with the pyridine nitrogen of two different INA molecules that behave as monodentate ligands. The amide groups of the INA form H-bonds with other amide and carboxylate groups forming a molecular crystal with a three-dimensional H-bond arrangement of the binuclear units. With the SAS technique, crystals 100-fold smaller than those obtained by slow evaporation were obtained, proving SAS as a suitable method for mixed-ligand complexes preparation with reduced particle size and therefore expected bioavailability enhancement

Psychiatric care in university population

[EN] It is well-known that university students experience high levels of mental health problems. University life presents changes and challenges that can be stressful and may affect the mental health of its community. More than 20 years ago, the Social Affairs Service (SAS) of the University of Salamanca started a program that ensured the mental health care in their community. The Psychiatric Care Unit is part of this program and its objectives are: 1) to detect serious mental disorders; 2) treat mild mental disorders; 3) give information to prevent illness and promote mental health; 4) serve as support in patients with previous follow-up that has been discontinued due to the beginning of their studies; 5) liaise with referral psychiatrists

Environmental genomics of "Haloquadratum walsbyi" in a saltern crystallizer indicates a large pool of accessory genes in an otherwise coherent species

BACKGROUND: Mature saturated brine (crystallizers) communities are largely dominated (>80% of cells) by the square halophilic archaeon "Haloquadratum walsbyi". The recent cultivation of the strain HBSQ001 and thesequencing of its genome allows comparison with the metagenome of this taxonomically simplified environment. Similar studies carried out in other extreme environments have revealed very little diversity in gene content among the cell lineages present. RESULTS: The metagenome of the microbial community of a crystallizer pond has been analyzed by end sequencing a 2000 clone fosmid library and comparing the sequences obtained with the genome sequence of "Haloquadratum walsbyi". The genome of the sequenced strain was retrieved nearly complete within this environmental DNA library. However, many ORF's that could be ascribed to the "Haloquadratum" metapopulation by common genome characteristics or scaffolding to the strain genome were not present in the specific sequenced isolate. Particularly, three regions of the sequenced genome were associated with multiple rearrangements and the presence of different genes from the metapopulation. Many transposition and phage related genes were found within this pool which, together with the associated atypical GC content in these areas, supports lateral gene transfer mediated by these elements as the most probable genetic cause of this variability. Additionally, these sequences were highly enriched in putative regulatory and signal transduction functions. CONCLUSION: These results point to a large pan-genome (total gene repertoire of the genus/species) even in this highly specialized extremophile and at a single geographic location. The extensive gene repertoire is what might be expected of a population that exploits a diverse nutrient pool, resulting from the degradation of biomass produced at lower salinities