Evaluation of commercial pyroelectric detectors

A series of commercially available pyroelectric detectors made from PVF2, LTO, SBN, and TGS were evaluated in terms of responsivity and detectivity as a function of frequency. The performance of the detectors evaluated was very different, depending upon the manufacturer of the detector, and this dependency was primarily related to the thickness of the various detectors. The best detectors of each material were comparable in performance at frequencies around 10 Hz but differed radically at frequencies above 100 Hz

Pyroelectric detector arrays

A pyroelectric detector array and the method for using it are described. A series of holes formed through a silicon dioxide layer on the surface of a silicon substrate forms the mounting fixture for the pyroelectric detector array. A series of nontouching strips of indium are formed around the holes to make contact with the backside electrodes and form the output terminals for individual detectors. A pyroelectric detector strip with front and back electrodes, respectively, is mounted over the strips. Biasing resistors are formed on the surface of the silicon dioxide layer and connected to the strips. A metallized pad formed on the surface of layer is connected to each of the biasing resistors and to the film to provide the ground for the pyroelectric detector array

Are there any good digraph width measures?

Several different measures for digraph width have appeared in the last few years. However, none of them shares all the "nice" properties of treewidth: First, being \emph{algorithmically useful} i.e. admitting polynomial-time algorithms for all \MS1-definable problems on digraphs of bounded width. And, second, having nice \emph{structural properties} i.e. being monotone under taking subdigraphs and some form of arc contractions. As for the former, (undirected) \MS1 seems to be the least common denominator of all reasonably expressive logical languages on digraphs that can speak about the edge/arc relation on the vertex set.The latter property is a necessary condition for a width measure to be characterizable by some version of the cops-and-robber game characterizing the ordinary treewidth. Our main result is that \emph{any reasonable} algorithmically useful and structurally nice digraph measure cannot be substantially different from the treewidth of the underlying undirected graph. Moreover, we introduce \emph{directed topological minors} and argue that they are the weakest useful notion of minors for digraphs

High field CdS detector for infrared radiation

New and highly sensitive method of detecting infrared irradiation makes possible solid state infrared detector which is more sensitive near room temperature than usual photoconductive low band gap semiconductor devices. Reconfiguration of high field domains in cadmium sulphide crystals provides basis for discovery

Development of Signal Amplification By Reversible Exchange (SABRE) towards biological and forensic applications

Work presented in this thesis focuses on the application of signal amplification by reversible exchange (SABRE) to the hyperpolarisation of small molecules. The aim of this work was to develop the technique towards future biologically relevant applications through resolution of barriers currently preventing clinical relevance. Furthermore, applications to forensics were also investigated. SABRE currently almost exclusively utilises iridium-based catalysts, however, there are reports of the utilisation of cobalt and one mixed iridium/rhodium system. A range of rhodium based complexes, [Rh(IMes)(COD)Cl] (6), [Rh(ImNPri2)(COD)Cl] (7), [Rh(ItBu)(COD)Cl] (8) and [Rh(ICy)(COD)Cl] (9), were synthesised and evaluated for SABRE activity. Testing demonstrated that these species were unable to form stable dihydride species at room temperature and therefore the iridium complex [Ir(IMes)(COD)Cl] (4) was utilised for the remainder of the work. 19F SABRE provides a versatile route for measurements in vivo due to the low background present within the body. This work assessed the hyperpolarisation of 2-, 3-, 4-, 3,5- and pentafluoropyridine (L2 – L6), that have been interrogated by SABRE to establish a theoretical understanding of their efficacy with respect to polarisation transfer. However, hyperpolarisation of L3, which yielded the highest enhancement, resulted in an antiphase signal which may lead to internal cancelation within a biological imaging context. Thus, Signal Amplification By Reversible Exchange in shield enables alignment transfer to heteronuclei (SABRE-SHEATH) was employed to generate an in-phase absorptive hyperpolarised signal. Recent studies have demonstrated 4 is cytotoxic, therefore the mounting of the catalyst on silica or polymer derived supports was evaluated for the generation of a HET-SABRE catalyst and hyperpolarisation reported for a heterogeneous system. The solids proved effective at scavenging the metal from solution, therefore, an evaluation of their potential efficacy for production of a biocompatible bolus following homogenous SABRE is presented. 2-(2-pyridyl)ethyl - functionalised silica gel (S5) is reported to be the most effective 4 metal scavenger utilised, with results suggesting ~1g of S5 is capable of reducing the iridium content of a bolus from ~1005ppm to below background levels within 2 minutes. The hyperpolarisation of a range of fentanyl derivatives is F1-F5, including Mirfentanil (F5), a derivative with known biological activity. Both F2 and F5 have been detected within an excess of heroin. F5 was detected at a concentration of 81 μM in ~5 seconds when ~145 mM of heroin was present. Further to this, the 19F SABRE of a world health organisation essential medicine, voriconazole, is reported at a concentration ~4 times below current dosing guidelines

A study of beryllium and beryllium-lithium complexes in single crystal silicon

When beryllium is thermally diffused into silicon, it gives rise to acceptor levels 191 MeV and 145 meV above the valence band. Quenching and annealing studies indicate that the 145-MeV level is due to a more complex beryllium configuration than the 191-MeV level. When lithium is thermally diffused into a beryllium-doped silicon sample, it produces two acceptor levels at 106 MeV and 81 MeV. Quenching and annealing studies indicate that these levels are due to lithium forming a complex with the defects responsible for the 191-MeV and 145-MeV beryllium levels, respectively. Electrical measurements imply that the lithium impurity ions are physically close to the beryllium impurity atoms. The ground state of the 106-MeV beryllium level is split into two levels, presumably by internal strains. Tentative models are proposed

Squeezing out the last 1 nanometer of water: A detailed nanomechanical study

In this study, we present a detailed analysis of the squeeze-out dynamics of nanoconfined water confined between two hydrophilic surfaces measured by small-amplitude dynamic atomic force microscopy (AFM). Explicitly considering the instantaneous tip-surface separation during squeezeout, we confirm the existence of an adsorbed molecular water layer on mica and at least two hydration layers. We also confirm the previous observation of a sharp transition in the viscoelastic response of the nanoconfined water as the compression rate is increased beyond a critical value (previously determined to be about 0.8 nm/s). We find that below the critical value, the tip passes smoothly through the molecular layers of the film, while above the critical speed, the tip encounters "pinning" at separations where the film is able to temporarily order. Pre-ordering of the film is accompanied by increased force fluctuations, which lead to increased damping preceding a peak in the film stiffness once ordering is completed. We analyze the data using both Kelvin-Voigt and Maxwell viscoelastic models. This provides a complementary picture of the viscoelastic response of the confined water film

High field CdS detector for infrared radiation

An infrared radiation detector including a cadmium sulfide platelet having a cathode formed on one of its ends and an anode formed on its other end is presented. The platelet is suitably doped such that stationary high-field domains are formed adjacent the cathode when based in the negative differential conductivity region. A negative potential is applied to the cathode such that a high-field domain is formed adjacent to the cathode. A potential measuring probe is located between the cathode and the anode at the edge of the high-field domain and means are provided for measuring the potential at the probe whereby this measurement is indicative of the infrared radiation striking the platelet

Orbit-resolved photometry and echelle spectroscopy of the cataclysmic variable ST LMi during a 2007 high state

We present high-resolution echelle spectra and contemporaneous photometry of the polar ST LMi during a high state in 2007 March. Emission lines at Hα, He I λ5876, and He I λ7065 show similar line profiles over orbital phase and have narrow and broad components. These profile changes with phase are very similar to those reported in earlier high-state studies of ST LMi. The radial velocity curves from double Gaussian fits to the line profiles are interpreted as two crossing curves, neither of which is coincident with the orbital motion of the secondary star. We attribute one component to infall motions near the white dwarf and the other to a gas streaming along magnetic field lines connecting the two stars

Ionisation and discharge in cloud-forming atmospheres of brown dwarfs and extrasolar planets

Brown dwarfs and giant gas extrasolar planets have cold atmospheres with rich chemical compositions from which mineral cloud particles form. Their properties, like particle sizes and material composition, vary with height, and the mineral cloud particles are charged due to triboelectric processes in such dynamic atmospheres. The dynamics of the atmospheric gas is driven by the irradiating host star and/or by the rotation of the objects that changes during its lifetime. Thermal gas ionisation in these ultra-cool but dense atmospheres allows electrostatic interactions and magnetic coupling of a substantial atmosphere volume. Combined with a strong magnetic field , a chromosphere and aurorae might form as suggested by radio and x-ray observations of brown dwarfs. Non-equilibrium processes like cosmic ray ionisation and discharge processes in clouds will increase the local pool of free electrons in the gas. Cosmic rays and lighting discharges also alter the composition of the local atmospheric gas such that tracer molecules might be identified. Cosmic rays affect the atmosphere through air showers in a certain volume which was modelled with a 3D Monte Carlo radiative transfer code to be able to visualise their spacial extent. Given a certain degree of thermal ionisation of the atmospheric gas, we suggest that electron attachment to charge mineral cloud particles is too inefficient to cause an electrostatic disruption of the cloud particles. Cloud particles will therefore not be destroyed by Coulomb explosion for the local temperature in the collisional dominated brown dwarf and giant gas planet atmospheres. However, the cloud particles are destroyed electrostatically in regions with strong gas ionisation. The potential size of such cloud holes would, however, be too small and might occur too far inside the cloud to mimic the effect of, e.g. magnetic field induced star spots