Mechanism of Vanadium Leaching during Surface Weathering of Basic Oxygen Furnace Steel Slag Blocks: A Microfocus X-ray Absorption Spectroscopy and Electron Microscopy Study

© 2017 American Chemical Society. Basic oxygen furnace (BOF) steelmaking slag is enriched in potentially toxic V which may become mobilized in high pH leachate during weathering. BOF slag was weathered under aerated and air-excluded conditions for 6 months prior to SEM/EDS and μXANES analysis to determine V host phases and speciation in both primary and secondary phases. Leached blocks show development of an altered region in which free lime and dicalcium silicate phases were absent and Ca-Si-H was precipitated (CaCO 3 was also present under aerated conditions). μXANES analyses show that V was released to solution as V(V) during dicalcium silicate dissolution and some V was incorporated into neo-formed Ca-Si-H. Higher V concentrations were observed in leachate under aerated conditions than in the air-excluded leaching experiment. Aqueous V concentrations were controlled by Ca 3 (VO 4 ) 2 solubility, which demonstrate an inverse relationship between Ca and V concentrations. Under air-excluded conditions Ca concentrations were controlled by dicalcium silicate dissolution and Ca-Si-H precipitation, leading to relatively high Ca and correspondingly low V concentrations. Formation of CaCO 3 under aerated conditions provided a sink for aqueous Ca, allowing higher V concentrations limited by kinetic dissolution rates of dicalcium silicate. Thus, V release may be slowed by the precipitation of secondary phases in the altered region, improving the prospects for slag reuse

Mechanism of Vanadium Leaching during Surface Weathering of Basic Oxygen Furnace Steel Slag Blocks: A Microfocus X-ray Absorption Spectroscopy and Electron Microscopy Study

Basic oxygen furnace (BOF) steelmaking slag is enriched in potentially toxic V which may become mobilized in high pH leachate during weathering. BOF slag was weathered under aerated and air-excluded conditions for 6 months prior to SEM/EDS and μXANES analysis to determine V host phases and speciation in both primary and secondary phases. Leached blocks show development of an altered region in which free lime and dicalcium silicate phases were absent and Ca–Si–H was precipitated (CaCO₃ was also present under aerated conditions). μXANES analyses show that V was released to solution as V(V) during dicalcium silicate dissolution and some V was incorporated into neo-formed Ca–Si–H. Higher V concentrations were observed in leachate under aerated conditions than in the air-excluded leaching experiment. Aqueous V concentrations were controlled by Ca₃(VO₄)₂ solubility, which demonstrate an inverse relationship between Ca and V concentrations. Under air-excluded conditions Ca concentrations were controlled by dicalcium silicate dissolution and Ca–Si–H precipitation, leading to relatively high Ca and correspondingly low V concentrations. Formation of CaCO₃ under aerated conditions provided a sink for aqueous Ca, allowing higher V concentrations limited by kinetic dissolution rates of dicalcium silicate. Thus, V release may be slowed by the precipitation of secondary phases in the altered region, improving the prospects for slag reuse

Nanobubble aeration enhanced wastewater treatment and bioenergy generation in constructed wetlands coupled with microbial fuel cells

Artificial aeration is a widely used approach in wastewater treatment to enhance the removal of pollutants, however, traditional aeration techniques have been challenging due to the low oxygen transfer rate (OTR). Nanobubble aeration has emerged as a promising technology that utilise nano-scale bubbles to achieve higher OTRs owing to their large surface area and unique properties such as longevity and reactive oxygen species generation. This study, for the first time, investigated the feasibility of coupling nanobubble technology with constructed wetlands (CWs) for treating livestock wastewater. The results demonstrated that nanobubble-aerated CWs achieved significantly higher removal efficiencies of total organic carbon (TOC) and ammonia (NH4+-N), at 49 % and 65 %, respectively, compared to traditional aeration treatment (36 % and 48 %) and the control group (27 % and 22 %). The enhanced performance of the nanobubble-aerated CWs can be attributed to the nearly three times higher amount of nanobubbles (Ø < 1 μm) generated from the nanobubble pump (3.68 × 108 particles/mL) compared to the normal aeration pump. Moreover, the microbial fuel cells (MFCs) embedded in the nanobubble-aerated CWs harvested 5.5 times higher electricity energy (29 mW/m2) compared to the other groups. The results suggested that nanobubble technology has the potential to trigger the innovation of CWs by enhancing their capacity for water treatment and energy recovery. Further research needs are proposed to optimise the generation of nanobubbles, allowing them to be effectively coupled with different technologies for engineering implementation

Use of bauxite residue (red mud) as a low cost sorbent for sulfide removal in polluted water remediation

Sulfide is an important pollutant in aqueous systems. Sulfide removal from polluted waters is required prior to discharge. Red mud RM) is a solid waste of bauxite processing that is rich in reactive iron oxides and consequently has the potential to be used to remove sulfide from aqueous systems. A series of experiments were undertaken using raw and sintered RM to remove sulfide from waters. RM was highly efficient at sulfide removal (average 75% sulfide removal at initial concentration of ~5 mg L-1, with 500 mg L-1 RM addition) due to both physical adsorption (high specific area) and chemical reaction (with amorphous Fe). Sintered RM, which has a lower surface area and lower mineral reactivity, was much less efficient at removing sulfide (~20% removal under equivalent experimental conditions). Furthermore, concomitant metal release from raw RM was lower than for sintered RM during the sulfide removal process. The results showed that raw RM is a potentially suitable material for sulfide removal from polluted waters and consequently could be used as a low cost alternative treatment in certain engineering applications

Preferred reporting items for studies mapping onto preference-based outcome measures: The MAPS statement

'Mapping' onto generic preference-based outcome measures is increasingly being used as a means of generating health utilities for use within health economic evaluations. Despite publication of technical guides for the conduct of mapping research, guidance for the reporting of mapping studies is currently lacking. The MAPS (MApping onto Preference-based measures reporting Standards) statement is a new checklist, which aims to promote complete and transparent reporting of mapping studies. The primary audiences for the MAPS statement are researchers reporting mapping studies, the funders of the research, and peer reviewers and editors involved in assessing mapping studies for publication. A de novo list of 29 candidate reporting items and accompanying explanations was created by a working group comprised of six health economists and one Delphi methodologist. Following a two-round, modified Delphi survey with representatives from academia, consultancy, health technology assessment agencies and the biomedical journal editorial community, a final set of 23 items deemed essential for transparent reporting, and accompanying explanations, was developed. The items are contained in a user friendly 23 item checklist. They are presented numerically and categorised within six sections, namely: (i) title and abstract; (ii) introduction; (iii) methods; (iv) results; (v) discussion; and (vi) other. The MAPS statement is best applied in conjunction with the accompanying MAPS explanation and elaboration document. It is anticipated that the MAPS statement will improve the clarity, transparency and completeness of reporting of mapping studies. To facilitate dissemination and uptake, the MAPS statement is being co-published by eight health economics and quality of life journals, and broader endorsement is encouraged. The MAPS working group plans to assess the need for an update of the reporting checklist in five years' time. This statement was published jointly in Applied Health Economics and Health Policy, Health and Quality of Life Outcomes, International Journal of Technology Assessment in Health Care, Journal of Medical Economics, Medical Decision Making, PharmacoEconomics, and Quality of Life Research

Understanding the nature of atmospheric acid processing of mineral dusts in supplying bioavailable phosphorus to the oceans

Acidification of airborne dust particles can dramatically increase the amount of bioavailable phosphorus (P) deposited on the surface ocean. Experiments were conducted to simulate atmospheric processes and determine the dissolution behaviour of phosphorus compounds in dust and dust precursors oils. Acid dissolution occurs rapidly (seconds to minutes) and is controlled by the amount of H + ions present. For H + 10-4 mol per gram of dust, the amount of phosphorus (and Ca) released follows a power law dependent on the amount of H + consumed until all inorganic phosphorus minerals are exhausted and the final pH remains acidic. Once dissolved, phosphorus will stay in solution due to slow precipitation kinetics. Dissolution of apatite-P, the major mineral phase in dust (79-96%), occurs whether CaCO 3 is present or not, though the increase in dissolved phosphorus is greater if CaCO 3 is absent or if the particles are externally mixed. The system was modelled adequately as a simple mixture of apatite-P and calcite. Phosphorus dissolves readily by acid processes in the atmosphere in contrast to iron, which dissolves slower and is subject to re-precipitation at cloud water pH. We show that acidification can increase bioavailable phosphorus deposition over large areas of the globe, and may explain much of the previously observed patterns of variability in leachable phosphorus in oceanic areas where primary productivity is limited by this nutrient (e.g. Mediterranean)

Platelet Factor 4 Activity against P. falciparum and Its Translation to Nonpeptidic Mimics as Antimalarials

SummaryPlasmodium falciparum pathogenesis is affected by various cell types in the blood, including platelets, which can kill intraerythrocytic malaria parasites. Platelets could mediate these antimalarial effects through human defense peptides (HDPs), which exert antimicrobial effects by permeabilizing membranes. Therefore, we screened a panel of HDPs and determined that human platelet factor 4 (hPF4) kills malaria parasites inside erythrocytes by selectively lysing the parasite digestive vacuole (DV). PF4 rapidly accumulates only within infected erythrocytes and is required for parasite killing in infected erythrocyte-platelet cocultures. To exploit this antimalarial mechanism, we tested a library of small, nonpeptidic mimics of HDPs (smHDPs) and identified compounds that kill P. falciparum by rapidly lysing the parasite DV while sparing the erythrocyte plasma membrane. Lead smHDPs also reduced parasitemia in a murine malaria model. Thus, identifying host molecules that control parasite growth can further the development of related molecules with therapeutic potential

An electrochromic ionic liquid: design, characterisation and performance in a solid state platform

This work describes the synthesis and characteristics of a novel electrochromic ionic liquid (IL) based on a phosphonium core tethered to a viologen moiety. When integrated into a solid-state electrochromic platform, the viologen modified IL behaved as both the electrolyte and the electrochromic material. Platform fabrication was achieved through in situ photo-polymerisation and encapsulation of this novel IL within a hybrid sol-gel. Important parameters of the platform performance, including its coloration efficiency, switching kinetics and optical properties were characterised using UV/Vis spectroscopy and cyclic voltammetry in tandem. The electrochromic platform exhibits a coloration efficiency of 10.72 cm2C-1, and a varied optical output as a function of the incident current. Despite the rather viscous nature of the material, the platform exhibited approximately two orders of magnitude faster switching kinetics (221 seconds to reach 95 % absorbance) when compared to previously reported electrochromic ILs (18,000 seconds)

The effects of amisulpride on five dimensions of psychopathology in patients with schizophrenia: a prospective open- label study

BACKGROUND: The efficacy of antipsychotics can be evaluated using the dimensional models of schizophrenic symptoms. The D(2)/D(3)-selective antagonist amisulpride has shown similar efficacy and tolerability to other atypical antipsychotics. The aim of the present study was to determine the efficacy of amisulpride on the dimensional model of schizophrenic symptoms and tolerability in latin schizophrenic patients. METHOD: Eighty schizophrenic patients were enrolled and 70 completed a prospective open-label 3-month study with amisulpride. The schizophrenic symptoms, psychosocial functioning and side-effects were evaluated with standardized scales. RESULTS: The patients showed significant improvement in the five dimensions evaluated. Amisulpride (median final dose 357.1 mg/d) was well-tolerated without treatment-emergent extrapyramidal side-effects. CONCLUSION: Amisulpride showed efficacy on different psychopathological dimensions and was well tolerated, leading to consider this drug a first line choice for the treatment of schizophrenia

1963

Trees for a Beautiful Golf Course by Philip Scott (page 1) The Golf Course\u27s Worst Enemy by Charles Amorim and Hal Haskell (2) Message from the President by James f. Gilligan (2) Turf Management Club News (3) Quotes from 1962 Freshman (4) When I consider How my Night is Spent Leonard Mailloux(5) Protection of a Golf Course by Pay Lucas Jr. (6) Safety - The Superintendents\u27 Responsibility by Gerald Peters (7) Picture - Senior Stockbridge Turf Majors (8) Picture - Freshmen Stockbridge Turf Majors (9) Kansas - In the Transition Zone by Carl Beer (10 Seeds by Don Daigle (11) Picture - Dean F. P. Jeffrey, Dr. W.G. Colby and Director J. R. Beattie (12) Picture - Graduates of Winter School for Turf Managers - 1963 (13) The Effect of Last Year\u27s Weather Upon This Year\u27s Incidence of Turf Insects by John C. Schread (A-1) Labor-Management Relations by Mortimer H. Gavin S.J. (A-4) Massachusetts Labor Laws by Andrew C. SInclair (A-7) Golf Course Budget by John Espey (A-10) Golf Course Budgets by Robert St. Thomas (A-12) Purpose & Method of Budgeting by Leon St. Pierre (A-13) The Committee Chairman, His Duties by Charles Connelly (A-16) Long-range vs. Short-range Planning by George Farber (A-18) The Golf Course Superintendent, His Duties by Sherwood Moore (A-20) The Budget by Leo Kowalski (A-25) Public Relations by Leon St. Pierre (A-26) A Study of WIlt by Harry Meusal (A-28) Specifications for a Method of Putting Green Construction by Alexander Radko (A-33) Management of Kentucky Bluegrass & Grass Mixtures for Turf by F.V. Juska (A-38) What\u27s New in Fertilizers by Geoffrey S. Cornish (A-40) Methylene Ureas by Harvey Stangel (A-42) Plastic Coated Fertilizers by Louis I. Hansen (A-44) The Role of Sewage Sludge by James Latham Jr. (A-49) The Role of Ureaforms in the Turf Fertilizer Industry by Robert T. Miller (A-51) Why Low Phosphorus & Higher Potassium by L. J. Sullivan (A-55) Uptake of Potassium by Evangel Bredakis (A-59) Responsibility of Industry & Community in Land Usage & Plantings by Joseph L. Beasley (A-61) Turf & Other Planting Problems by H. Thurston Handley Jr. (A-65) Weeds & Diseases by Dominic Marini (A-67) General Maintenacne & Equipment by Lewis Hodgkinson (A-68) Fertilizer Problems by William J. Bennett (A-70) Lawn Construction & Insect Problems by herbert C. Fordham (A-71