207 research outputs found
Using synchrotron-based X-Ray microtomography and functional contrast agents in environmental applications
Despite very rapid development in commercial X-ray tomography technology, synchrotron-based tomography facilities still have a number of advantages over conventional systems. The high photon flux inherent of synchrotron radiation sources allows for (i) high resolution to micro- or nanometer scales depending on the individual beamline, (ii) rapid acquisition times that allow for collection of sufficient data for statistically significant results in a short amount of time as well as prevention of temporal changes that would take place during longer scan times, and (iii) optimal implementation of contrast agents that allow us to resolve features that would not be decipherable in scans obtained with a polychromatic radiation source. This chapter highlights recent advances in capabilities at synchrotron sources, as well as implementation of synchrotron-based computed microtomography (CMT) to two topics of interest to researchers in the soil science, hydrology, and environmental engineering fields, namely multiphase flow in porous media and characterization of biofilm architecture in porous media. In both examples, we make use of contrast agents and photoelectric edge-specic scanning (single- or dual-energy type), in combination with advanced image processing techniques
Drag Prediction for the DLR-F6 Wing/Body and DPW Wing using CFL3D and OVERFLOW Overset Mesh
A series of overset grids was generated in response to the 3rd AIAA CFD Drag Prediction Workshop (DPW-III) which preceded the 25th Applied Aerodynamics Conference in June 2006. DPW-III focused on accurate drag prediction for wing/body and wing-alone configurations. The grid series built for each configuration consists of a coarse, medium, fine, and extra-fine mesh. The medium mesh is first constructed using the current state of best practices for overset grid generation. The medium mesh is then coarsened and enhanced by applying a factor of 1.5 to each (I,J,K) dimension. The resulting set of parametrically equivalent grids increase in size by a factor of roughly 3.5 from one level to the next denser level. CFD simulations were performed on the overset grids using two different RANS flow solvers: CFL3D and OVERFLOW. The results were post-processed using Richardson extrapolation to approximate grid converged values of lift, drag, pitching moment, and angle-of-attack at the design condition. This technique appears to work well if the solution does not contain large regions of separated flow (similar to that seen n the DLR-F6 results) and appropriate grid densities are selected. The extra-fine grid data helped to establish asymptotic grid convergence for both the OVERFLOW FX2B wing/body results and the OVERFLOW DPW-W1/W2 wing-alone results. More CFL3D data is needed to establish grid convergence trends. The medium grid was utilized beyond the grid convergence study by running each configuration at several angles-of-attack so drag polars and lift/pitching moment curves could be evaluated. The alpha sweep results are used to compare data across configurations as well as across flow solvers. With the exception of the wing/body drag polar, the two codes compare well qualitatively showing consistent incremental trends and similar wing pressure comparisons
cDNA targets improve whole blood gene expression profiling and enhance detection of pharmocodynamic biomarkers: a quantitative platform analysis
Shock compaction heating and collisional processes in the production of type 3 ordinary chondrites: Lessons from the (nearly) unique L3 chondrite melt breccia Northwest Africa 8709*
Northwest Africa (NWA) 8709 is a rare example of a type 3 ordinary chondrite melt breccia and provides critical information for the shock compaction histories of chondrites. An L3 protolith for NWA 8709 is inferred on the basis of oxygen isotope composition, elemental composition, diverse mineral chemistry, and overall texture. NWA 8709 is among the most strongly shocked type 3 chondrites known, and experienced complete melting of the matrix and partial melting of chondrules. Unmelted phases underwent FeO reduction and partial homogenization, with reduction possibly occurring by reaction of olivine and lowâCa pyroxene with an Sâbearing gas that was produced by vaporization. Chondrules and metal grains became foliated by uniaxial compaction, and during compression, chondrules and fragments became attached to form larger clumps. This process, and possibly also melt incorporation into chondrules to cause âinflation,â may have contributed to anomalously large chondrule sizes in NWA 8709. The melt breccia character is attributed to strong shock affecting a porous precursor. Dataâmodel comparisons suggest that a precursor with 23% porosity that was impacted by a 3 km/s projectile could have produced the meteorite. The rarity of other type 3 ordinary chondrite melt breccias implies that the immediate precursors to such chondrites were lower in porosity than the NWA 8709 precursor, or experienced weaker shocks. Altogether, the data imply a predominantly âquietâ dynamical environment to form most type 3 ordinary chondrites, with compaction occurring in a series of relatively weak shock events
A four-dimensional X-ray tomographic microscopy study of bubble growth in basaltic foam
Understanding the influence of bubble foams on magma permeability and strength is critical to investigations of volcanic eruption mechanisms. Increasing foam porosity decreases strength, enhancing the probability of an eruption. However, higher porosities lead to larger permeabilities, which can lessen the eruption hazard. Here we measure bubble size and wall thickness distributions, as well as connectivity, and calculate permeabilities and tensile strengths of basaltic foams imaged by synchrotron X-ray tomographic microscopy during bubble growth in hydrated basaltic melts. Rapid vesiculation produces porous foams whose fragmentation thresholds are only 5-6 MPa and whose permeabilities increase from approximately 1x10(-10) to 1x10(-9) m(2) between 10 and 14 s despite decreasing connectivity between bubbles. These results indicate that basaltic magmas are most susceptible to failure immediately upon vesiculation and at later times, perhaps only 10's of seconds later, permeability increases may lessen the hazard of explosive, basaltic, Plinian eruptions
Connection between the Accretion Disk and Jet in the Radio Galaxy 3C 111
We present the results of extensive multi-frequency monitoring of the radio
galaxy 3C 111 between 2004 and 2010 at X-ray (2.4--10 keV), optical (R band),
and radio (14.5, 37, and 230 GHz) wave bands, as well as multi-epoch imaging
with the Very Long Baseline Array (VLBA) at 43 GHz. Over the six years of
observation, significant dips in the X-ray light curve are followed by
ejections of bright superluminal knots in the VLBA images. This shows a clear
connection between the radiative state near the black hole, where the X-rays
are produced, and events in the jet. The X-ray continuum flux and Fe line
intensity are strongly correlated, with a time lag shorter than 90 days and
consistent with zero. This implies that the Fe line is generated within 90
light-days of the source of the X-ray continuum. The power spectral density
function of X-ray variations contains a break, with steeper slope at shorter
timescales. The break timescale of 13 (+12,-6) days is commensurate with
scaling according to the mass of the central black hole based on observations
of Seyfert galaxies and black hole X-ray binaries (BHXRBs). The data are
consistent with the standard paradigm, in which the X-rays are predominantly
produced by inverse Compton scattering of thermal optical/UV seed photons from
the accretion disk by a distribution of hot electrons --- the corona ---
situated near the disk. Most of the optical emission is generated in the
accretion disk due to reprocessing of the X-ray emission. The relationships
that we have uncovered between the accretion disk and the jet in 3C 111, as
well as in the FR I radio galaxy 3C 120 in a previous paper, support the
paradigm that active galactic nuclei and Galactic BHXRBs are fundamentally
similar, with characteristic time and size scales proportional to the mass of
the central black holeComment: Accepted for publication in ApJ. 18 pages, 17 figures, 11 tables
(full machine readable data-tables online in ApJ website
Glucocorticoid Receptor-Tethered Mineralocorticoid Receptors Increase Glucocorticoid-Induced Transcriptional Responses
- âŠ