Solar panel cooling system with hollow fibres

Paper presented to the 3rd Southern African Solar Energy Conference, South Africa, 11-13 May, 2015.Solar panel overheating drastically reduces their efficiency and lifespan. This overheating is mainly associated with temperature fluctuations that occur under severe weather conditions. Overheating also has the potential to form electric arcs that can start to melt metal fixtures and burn away the module's insulating materials. The efficiency of electric solar panels is strongly dependent on temperature regime (especially in hot climates). For this reason, the introduction of cheap and light water-cooling, or a more general liquid-cooling system inside the solar panel, appears reasonable. Hollow fibre cooling systems consisting of plastic tubes of a small diameter (less than 1 mm) are one possible and simple solution. Fibres placed inside solar panels can be glued or otherwise connected to the surface and coolant flowing through them provides efficient and uniform cooling of all photovoltaic cells. Hollow fibres have very thin walls (about 0.1 mm) to transfer heat easily, and the system is light, compact and resistant to corrosion. Heat removed from the panel may be used for domestic or industrial needs or transferred to the atmosphere by cooling towers or dry-coolers.cf201

Mathematical modeling of drying processes of selected fruits and vegetables

This study investigates the behavior of fruit and vegetable samples during drying. The experimental data are fitted to several different thin-layer drying models. Regression analysis is used to determine model parameters, while statistical indicators serve to evaluate the goodness of fit. The power function model gives the best fit for all examined samples. Based on this model, different drying and heat storage technologies can be combined to ensure that the required residual moisture content of an agricultural product is reached. It is demonstrated on the case of a specific Togolese processing plant that under favorable conditions, fossil fuel consumption can be decreased by 33 %

Transient Thermal Stress Calculation of a Shell and Tube Condenser with Fixed Tubesheet

The present article deals with transient thermal stress calculation on a safety horizontal shell and tube condenser. This condenser is used in a power plant for cooling of hot steam diverted from the turbine in the case of its emergency shutdown. The standard stress calculation was provided according to the EN 13445 standard in steady regime. As consistent with this calculation, an expansion joint must be used on the shell. The main aim of this article is to describe a detailed calculation of the transient temperature field on the shell and tubes, using finite element method analysis, and longitudinal thermal stresses on the shell and tubes during the start-up process. Transient analyses are useable for more accurate EN 13445 calculation and, furthermore, for fatigue calculation

Indirect Convective Solar Drying Process of Pineapples as Part of Circular Economy Strategy

This study investigates the industrial-scale application of a simple convective solar drying process of pineapples as part of a circular economy strategy for developing countries. A renewable energy concept is presented, which follows the circular economy aims by effectively employing a simple system for biogas production and a two-stage drying system. Both these systems meet the requirements for implementation in the specific conditions of developing countries, of which Togo, where pineapple is a major crop, is taken as an example. With respect to earlier findings available in the literature, the paper focuses on the solar drying process, which is critical to the proposed strategy. A portable solar dryer working in indirect heating mode was built and later also modified to enhance its performance. Three main factors influencing the convective drying process, namely, drying time (270 min, 480 min), solar radiation intensity (650 W/m2, 1100 W/m2), and slice thickness (6–8 mm, 12–14 mm), were considered. The statistical Design of Experiments (DOE) method was applied to reduce the number and scope of experiments. In the best case, the moisture content was reduced from 87.3 wt % in fresh samples to 29.4 wt % in dried samples, which did not meet the quality requirements for dried fruit. An additional conventional post-solar drying procedure would, therefore, still be necessary. Nonetheless, the results show that in the case of pineapple drying the consumption of fossil fuels can be decreased significantly if convective solar pre-drying is employed

Nutlin-3a-aa: Improving the Bioactivity of a p53/MDM2 Interaction Inhibitor by Introducing a Solvent-Exposed Methylene Group

Nutlin-3a is a reversible inhibitor of the p53/MDM2 interaction. We have synthesized the derivative Nutlin-3a-aa bearing an additional exocyclic methylene group in the piperazinone moiety. Nutlin-3a-aa is more active than Nutlin-3a against purified wild-type MDM2, and is more effective at increasing p53 levels and releasing transcription of p53 target genes from MDM2-induced repression. X-ray analysis of wild-type MDM2-bound Nutlin-3a-aa indicated that the orientation of its modified piperazinone ring was altered in comparison to the piperazinone ring of MDM2-bound Nutlin-3a, with the exocyclic methylene group of Nutlin-3a-aa pointing away from the protein surface. Our data point to the introduction of exocyclic methylene groups as a useful approach by which to tailor the conformation of bioactive molecules for improved biological activity.This work was generously supported by the Deutsche Forschungsgemeinschaft (BE 4572/3-1 to T.B.). We extend our thanks to Barbara Klüver, Katrin Eckhardt, Nadiya Brovchenko, and Domenique Herbstritt for experimental support. Parts of the data described in this manuscript have been published in the dissertation of Florian Nietzold (Leipzig University, 2019).31 In addition, this work was financially supported by the National Science Centre, Poland (NCN) under Grant Symphony 2014/12/W/NZ1/00457 (to T.A.H). We thank HZB for the allocation of synchrotron radiation beamtime. We acknowledge the MCB Structural Biology Core Facility (supported by the TEAM TECH CORE FACILITY/2017-4/6 grant from the Foundation for Polish Science) for valuable support. Open Access funding enabled and organized by Projekt DEAL

On the continuous and discontinuous precipitation of the L12 phase in Cu-Ni-Al alloys

L12 precipitate hardened Cu-Ni-Al alloys offer high strength, corrosion resistance and anti-biofouling properties, making them useful in marine engineering applications. Optimisation of their mechanical properties requires a full understanding of their complex precipitate nucleation and coarsening mechanisms. In this work, the microstructural characteristics and hardness of three Cu-Ni-Al alloys with compositions of Cu(95-x)NixAl5 (x = 5, 15, 25 at%) were investigated in the homogenised state and following heat treatments at 700˚C for 1, 10, 100 and 1000 hours. L12 precipitates were observed in the alloys containing ≥ 15 at% Ni. In these alloys, the L12 phase was found to precipitate via both continuous and discontinuous routes following all exposures at 700˚C. The coarsening behaviours of the continuous and discontinuous L12 distributions were characterised and correlated to measurements of hardness and lattice misfit. The alloys containing 15 and 25 at% Ni exhibited peak hardness after 1 h at 700˚C, which corresponded to average particle diameters of 30 nm, respectively. These results were rationalised through calculations of the change in the critical resolved shear stress associated with the transition from weakly to strongly coupled superpartial dislocations. The discontinuous reaction was observed to be led by L12 phase formation, which extended into the neighbouring grain, ahead of the reorientation front of the matrix

Oxide Dispersion Strengthened Nickel Based Alloys via Spark Plasma Sintering

Oxide dispersion strengthened (ODS) nickel based alloys were developed via mechanical milling and spark plasma sintering (SPS) of Ni–20Cr powder with additional dispersion of 1.2 wt% Y2O3 powder. Furthermore, 5 wt% Al2O3 was added to Ni–20Cr–1.2Y2O3 to provide composite strengthening in the ODS alloy. The effects of milling times, sintering temperature, and sintering dwell time were investigated on both mechanical properties and microstructural evolution. A high number of annealing twins was observed in the sintered microstructure for all the milling times. However, longer milling time contributed to improved hardness and narrower twin width in the consolidated alloys. Higher sintering temperature led to higher fraction of recrystallized grains, improved density and hardness. Adding 1.2 wt% Y2O3 to Ni–20Cr matrix significantly reduced the grain size due to dispersion strengthening effect of Y2O3 particles in controlling the grain boundary mobility and recrystallization phenomena. The strengthening mechanisms at room temperature were quantified based on both experimental and analytical calculations with a good agreement. A high compression yield stress obtained at 800 °C for Ni–20Cr–1.2Y2O3–5Al2O3 alloy was attributed to a combined effect of dispersion and composite strengthening