Selbstverwaltete Betriebe zwischen Tradition und Markt

Selbstverwaltete Betriebe bilden in der Schweiz und vielen anderen Ländern einen Organisationstypus an der Schnittstelle zwischen wirtschaftlicher und zivilgesellschaftlicher Sphäre, und sie sind ein Spezialfall der Sozialunternehmung. Ihr wirtschaftlicher Charakter ergibt sich daraus, dass die Betreiber einen erwerbswirtschaftlichen Zweck verfolgen und in der Regel auch ein nicht unerhebliches ökonomisches Risiko eingehen. Im Gegensatz zu anderen Wirtschaftsunternehmen werden neben den wirtschaftlichen aber auch gesellschaftspolitische Ziele verfolgt und nicht-wirtschaftliche Werte betont. Die Entscheidungsfindung erfolgt zudem basisdemokratisch nach dem Prinzip des ‹one man, one vote› und damit ohne Berücksichtigung etwaiger wirtschaftlich relevanter Unterschiede in den individuellen Beiträgen, wie finanzielles Kapital oder Fachqualifikationen. Der vorliegende Beitrag erläutert die Wurzeln der Selbstverwaltung und zeigt am Beispiel von 12 Selbstverwaltungsbetrieben in der Region Basel, durch welche Merkmale diese Betriebe in Werthaltungen und Management-System gekennzeichnet sind

Die stammesgeschichtliche Entwicklung der Samenpflanzen und ihre mögliche Einbeziehung in den Unterricht der Realschule

Schöpfung oder Evolution, kaum eine Frage spaltet die Gemüter so sehr wie diese. Der Beitrag behandelt eine mögliche schulische Umsetzung des weiten Themengebiets der Evolutionstheorie, am Beispiel der stammesgeschichtlichen Entwicklung der Landpflanzen. Ziel ist es Schülern exemplarisch anhand der Stammesgeschichte der Landpflanzen das Grundprinzip der Evolutionstheorie, also die Entwicklung primitiver Vorläufer zu rezenten Arten aufzuzeigen. So soll Schülern begreiflich gemacht werden, dass bereits einfache morphologische Abwandlungen eines „Grundbauplans“ eine Vielzahl neuer Formen ermöglichen. Gleichzeitig sollen die Schüler dazu angeregt werden, sich Gedanken über die Herkunft der Wuchsformen rezenter Pflanzengruppen zu machen und deren Entwicklung aus einem gemeinsamen primitiven Urahn abzuleiten und nachzuvollziehen. Schülern sollen die Grundlagen der Telomtheorie nach ZIMMERMANN (1965) eigenständig erarbeiten, indem sie sich im projektartigen Unterricht einen modellartigen Entwicklungsverlauf der Landpflanzen anhand dieser Theorie selbst gestalten

Losartan Treatment Attenuates Tumor-induced Myocardial Dysfunction

Fatigue and muscle wasting are common symptoms experienced by cancer patients. Data from animal models demonstrate that angiotensin is involved in tumor-induced muscle wasting, and that tumor growth can independently affect myocardial function, which could contribute to fatigue in cancer patients. In clinical studies, inhibitors of angiotensin converting enzyme (ACE) can prevent the development of chemotherapy-induced cardiovascular dysfunction, suggesting a mechanistic role for the renin–angiotensin–aldosterone system (RAAS). In the present study, we investigated whether an angiotensin (AT) 1-receptor antagonist could prevent the development of tumor-associated myocardial dysfunction. Methods and results: Colon26 adenocarcinoma (c26) cells were implanted into female CD2F1 mice at 8 weeks of age. Simultaneously, mice were administered Losartan (10 mg/kg) daily via their drinking water. In vivo echocardiography, blood pressure, in vitro cardiomyocyte function, cell proliferation assays, and measures of systemic inflammation and myocardial protein degradation were performed 19 days following tumor cell injection. Losartan treatment prevented tumor-induced loss of muscle mass and in vitro c26 cell proliferation, decreased tumor weight, and attenuated myocardial expression of interleukin-6. Furthermore, Losartan treatment mitigated tumor-associated alterations in calcium signaling in cardiomyocytes, which was associated with improved myocyte contraction velocity, systolic function, and blood pressures in the hearts of tumor-bearing mice. Conclusions: These data suggest that Losartan may mitigate tumor-induced myocardial dysfunction and inflammation

Analysis of death in major trauma: value of prompt post mortem computed tomography (pmCT) in comparison to office hour autopsy

Background: To analyze diagnostic accuracy of prompt post mortem Computed Tomography (pmCT) in determining causes of death in patients who died during trauma room management and to compare the results to gold standard autopsy during office hours. Methods: Multiple injured patients who died during trauma room care were enrolled. PmCT was performed immediately followed by autopsy during office hours. PmCT and autopsy were analyzed primarily regarding pmCT ability to find causes of death and secondarily to define exact causes of death including accurate anatomic localizations. For the secondary analysis data was divided in group-I with equal results of pmCT and autopsy, group-II with autopsy providing superior results and group-III with pmCT providing superior information contributing to but not majorly causing death. Results: Seventeen multiple trauma patients were enrolled. Since multiple trauma patients were enrolled more injuries than patients are provided. Eight patients sustained deadly head injuries (47.1 %), 11 chest (64.7 %), 4 skeletal system (23.5 %) injuries and one patient drowned (5.8 %). Primary analysis revealed in 16/17 patients (94.1 %) causes of death in accordance with autopsy. Secondary analysis revealed in 9/17 cases (group-I) good agreement of autopsy and pmCT. In seven cases autopsy provided superior results (group-II) whereas in 1 case pmCT found more information (group-III). Discussion: The presented work studied the diagnostic value of pmCT in defining causes of death in comparison to standard autopsy. Primary analysis revealed that in 94.1% of cases pmCT was able to define causes of death even if only indirect signs were present. Secondary analysis showed that pmCT and autopsy showed equal results regarding causes of death in 52.9%. Conclusions: PmCT is useful in traumatic death allowing for an immediate identification of causes of death and providing detailed information on bony lesions, brain injuries and gas formations. It is advisable to conduct pmCT especially in cases without consent to autopsy to gain information about possible causes of death and to rule out possible clinical errors

Incidence of delayed and missed diagnoses in whole-body multidetector CT in patients with multiple injuries after trauma

Background: Whole-body CT (WBCT) is the imaging modality of choice during the initial diagnostic work-up of multiple injured patients in order to identify serious injuries and initiate adequate treatment immediately. However, delayed diagnosed or even missed injuries have been reported frequently ranging from 1.3% to 47%. Purpose: To highlight commonly missed lesions in WBCT of patients with multiple injuries. Material and Methods: A total of 375 patients (age 42.8 +/- 17.9 years, ISS 26.6 +/- 17.0) with a WBCT (head to symphysis) were included. The final CT report was compared with clinical and operation reports. Discrepant findings were recorded and grouped as relevant and non-relevant to further treatment. In both groups, an experienced trauma radiologist read the CT images retrospectively, whether these lesions were missed or truly not detectable. Results: In 336 patients (89.6%), all injuries in the regions examined were diagnosed correctly in the final reports of the initial CT. Forty-eight patients (12.8%) had injuries in regions of the body that were not included in the CT. Fourteen patients (3.7%) had injuries that did not require further treatment. Twenty-five patients (6.7%) had injuries that required further treatment. With secondary interpretation, 85.4% of all missed lesions could be diagnosed in retrospect from the primary CT data-set. Small pancreatic and bowel contusions were identified as truly non-detectable. Conclusion: In multiple traumas, only a few missed injuries in initial WBCT reading are clinically relevant. However, as the vast majority of these injuries are detectable, the radiologist has to be alert for commonly missed findings to avoid a delayed diagnosis

Mononuclear cells modulate the activity of pancreatic stellate cells which in turn promote fibrosis and inflammation in chronic pancreatitis

Background: Interactions between mononuclear cells and activated pancreatic myofibroblasts (pancreatic stellate cells; PSC) may contribute to inflammation and fibrosis in chronic pancreatitis (CP). Methods: Markers of fibrosis and inflammation were concomitantly analysed by immunohistochemistry in chronic pancreatitis tissues. In vitro, PSC were stimulated with TNFalpha and LPS. Primary human blood mononuclear cells (PBMC) and PSC were cocultured, followed by analysis of cytokines and extracellular matrix (ECM) proteins. PBMC were derived from healthy donors and CP and septic shock patients. Results: In areas of mononuclear cell infiltration in chronic pancreatitis tissues, there was decreased immunoreactivity for collagen1 and fibronectin, in contrast to areas with sparse mononuclear cells, although PSC were detectable in both areas. LPS and TNFalpha induced collagen1 and fibronectin levels as well as the matrix degradation enzyme MMP-1. Coculture experiments with PSC and PBMC revealed increased fibronectin secretion induced by PBMC. In addition, donor and CP PBMC significantly induced an increase in IL-6, MCP-1 and TGFbeta levels under coculture conditions. Determination of the source of cytokines and ECM proteins by mRNA expression analysis confirmed PSC as major contributors of ECM production. The increase in cytokine expression was PBMC- and also PSC-derived. Conclusion: Mononuclear cells modulate the activity of pancreatic stellate cells, which may in turn promote fibrosis and inflammation

Plasma-wall interaction studies within the EUROfusion consortium: Progress on plasma-facing components development and qualification

This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.The provision of a particle and power exhaust solution which is compatible with first-wall components and edge-plasma conditions is a key area of present-day fusion research and mandatory for a successful operation of ITER and DEMO. The work package plasma-facing components (WP PFC) within the European fusion programme complements with laboratory experiments, i.e. in linear plasma devices, electron and ion beam loading facilities, the studies performed in toroidally confined magnetic devices, such as JET, ASDEX Upgrade, WEST etc. The connection of both groups is done via common physics and engineering studies, including the qualification and specification of plasma-facing components, and by modelling codes that simulate edge-plasma conditions and the plasma-material interaction as well as the study of fundamental processes. WP PFC addresses these critical points in order to ensure reliable and efficient use of conventional, solid PFCs in ITER (Be and W) and DEMO (W and steel) with respect to heat-load capabilities (transient and steady-state heat and particle loads), lifetime estimates (erosion, material mixing and surface morphology), and safety aspects (fuel retention, fuel removal, material migration and dust formation) particularly for quasi-steady-state conditions. Alternative scenarios and concepts (liquid Sn or Li as PFCs) for DEMO are developed and tested in the event that the conventional solution turns out to not be functional. Here, we present an overview of the activities with an emphasis on a few key results: (i) the observed synergistic effects in particle and heat loading of ITER-grade W with the available set of exposition devices on material properties such as roughness, ductility and microstructure; (ii) the progress in understanding of fuel retention, diffusion and outgassing in different W-based materials, including the impact of damage and impurities like N; and (iii), the preferential sputtering of Fe in EUROFER steel providing an in situ W surface and a potential first-wall solution for DEMO.European Commission; Consortium for Ocean Leadership 633053; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART