Impurity transport in Alcator C-Mod in the presence of poloidal density variation induced by ion cyclotron resonance heating

Impurity particle transport in an ion cyclotron resonance heated Alcator C-Mod discharge is studied with local gyrokinetic simulations and a theoretical model including the effect of poloidal asymmetries and elongation. In spite of the strong minority temperature anisotropy in the deep core region, the poloidal asymmetries are found to have a negligible effect on the turbulent impurity transport due to low magnetic shear in this region, in agreement with the experimental observations. According to the theoretical model, in outer core regions poloidal asymmetries may contribute to the reduction of the impurity peaking, but uncertainties in atomic physics processes prevent quantitative comparison with experiments.Comment: 32 pages, 12 figure

Heat-flux footprints for I-mode and EDA H-mode plasmas on Alcator C-Mod

IR thermography is used to measure the heat flux footprints on C-Mod’s outer target in I-mode and EDA H-mode plasmas. The footprint profiles are fit to a function with a simple physical interpretation. The fit parameter that is sensitive to the power decay length into the SOL, λ[subscript SOL], is ~1–3× larger in I-modes than in H-modes at similar plasma current, which is the dominant dependence for the H-mode λ[subscript SOL]. In contrast, the fit parameter sensitive to transport into the private-flux-zone along the divertor leg is somewhat smaller in I-mode than in H-mode, but otherwise displays no obvious dependence on I[subscript p], B[subscript t], or stored energy. A third measure of the footprint width, the “integral width”, is not significantly different between H- and I-modes. Also discussed are significant differences in the global power flows of the H-modes with “favorable” ∇B drift direction and those of the I-modes with “unfavorable” ∇B drift direction.United States. Dept. of Energy (Cooperative Agreement DE-FC02-99-ER54512

Effect of N2, Ne and Ar seeding on Alcator C-Mod H-mode confinement

The mitigation of divertor heat fluxes is an active topic of investigation on existing tokamaks. One approach uses radiation, both inside and outside the last closed flux surface (LCFS), to convert plasma thermal energy, usually directed towards dedicated plasma facing components, to soft X-ray and ultraviolet radiation, spread over a much larger surface area. Recent enhanced D-α H-mode experiments on Alcator C-Mod varied the ICRF input power and radiative power losses via impurity seeding to demonstrate that normalized energy confinement depends strongly on the difference between input power and the radiated power inside the LCFS. These investigations also show that when seeded with either Ne or N2, a factor of two and higher reduction in outer divertor heat flux is achieved while maintaining H[subscript 98,y2] ∼ 1.0. Conversely, when seeding with Ar, confinement is limited to H[subscript 98,y2] ∼ 0.8 for a similar level of exhaust power.United States. Dept. of Energy (DOE Contract Number DEFC0299ER54512

Assessment of a field-aligned ICRF antenna

Impurity contamination and localized heat loads associated with ion cyclotron range of frequency (ICRF) antenna operation are among the most challenging issues for ICRF utilization.. Another challenge is maintaining maximum coupled power through plasma variations including edge localized modes (ELMs) and confinement transitions. Here, we report on an experimental assessment of a field aligned (FA) antenna with respect to impurity contamination, impurity sources, RF enhanced heat flux and load tolerance. In addition, we compare the modification of the scrape of layer (SOL) plasma potential of the FA antenna to a conventional, toroidally aligned (TA) antenna, in order to explore the underlying physics governing impurity contamination linked to ICRF heating. The FA antenna is a 4-strap ICRF antenna where the current straps and antenna enclosure sides are perpendicular to and the Faraday screen rods are parallel to the total magnetic field. In principle, alignment with respect to the total magnetic field minimizes integrated E∥ (electric field along a magnetic field line) via symmetry. Consistent with expectations, we observed that the impurity contamination and impurity source at the FA antenna are reduced compared to the TA antenna. In both L and H-mode discharges, the radiated power is 20–30% lower for a FA-antenna heated discharge than a discharge heated with the TA-antennas. Further we observe that the fraction of RF energy deposited upon the antenna is less than 0.4 % of the total injected RF energy in dipole phasing. The total deposited energy increases significantly when the FA antenna is operated in monopole phasing. The FA antenna also exhibits an unexpected load tolerance for ELMs and confinement transitions compared to the TA antennas. However, inconsistent with expectations, we observe RF induced plasma potentials to be nearly identical for FA and TA antennas when operated in dipole phasing. In monopole phasing, the FA antenna has the highest plasma potentials and poor heating efficiency despite calculations indicating low integrated E∥. In mode conversion heating scenario, no core waves were detected in the plasma core indicating poor wave penetration. For monopole phasing, simulations suggest the antenna spectrum is peaked at very short wavelength and full wave simulations show the short wavelength has poor wave penetration to the plasma core.United States. Dept. of Energy (DOE award DE-FC02-99ER54512)United States. Dept. of Energy (Fusion Energy Postdoctoral Research Program administered by ORISE

Design and implementation of a prototype infrared video bolometer (IRVB) in MAST Upgrade

A prototype infrared video bolometer (IRVB) was successfully deployed in the Mega Ampere Spherical Tokamak Upgrade (MAST Upgrade or MAST-U), the first deployment of such a diagnostic in a spherical tokamak. The IRVB was designed to study the radiation around the lower x-point, another first in tokamaks, and has the potential to estimate emissivity profiles with spatial resolution beyond what is achievable with resistive bolometry. The system was fully characterized prior to installation on MAST-U, and the results are summarized here. After installation, it was verified that the actual measurement geometry in the tokamak qualitatively matches the design; this is a particularly difficult process for bolometers and was done using specific features of the plasma itself. The installed IRVB measurements are consistent both with observations from other diagnostics, including magnetic reconstruction, visible light cameras, and resistive bolometry, as well as with the IRVB-designed view. Early results show that with conventional divertor geometry and only intrinsic impurities (for example, C and He), the progression of radiative detachment follows a similar path to that observed for large aspect ratio tokamaks: The peak of the radiation moves along the separatrix from the targets to the x-point and high-field side midplane with a toroidally symmetric structure that can eventually lead to strong effects on the core plasma inside the separatrix

Quasi-coherent fluctuations limiting the pedestal growth on Alcator C-Mod: experiment and modelling

Performance predictions for future fusion devices rely on an accurate model of the pedestal structure. The candidate for predictive pedestal structure is EPED, and it is imperative to test the underlying hypotheses to further gain confidence for ITER projections. Here, we present experimental work testing one of the EPED hypotheses, namely the existence of a soft limit set by microinstabilities such as the kinetic ballooning mode. This work extends recent work on Alactor C-Mod (Diallo et al 2014 Phys. Rev. Lett. 112 115001), to include detailed measurements of the edge fluctuations and comparisons of edge simulation codes and experimental observations

Non-local heat transport in Alcator C-Mod ohmic L-mode plasmas

Non-local heat transport experiments were performed in Alcator C-Mod ohmic L-mode plasmas by inducing edge cooling with laser blow-off impurity (CaF2) injection. The non-local effect, a cooling of the edge electron temperature with a rapid rise of the central electron temperature, which contradicts the assumption of 'local' transport, was observed in low collisionality linear ohmic confinement (LOC) regime plasmas. Transport analysis shows this phenomenon can be explained either by a fast drop of the core diffusivity, or the sudden appearance of a heat pinch. In high collisionality saturated ohmic confinement (SOC) regime plasmas, the thermal transport becomes 'local': the central electron temperature drops on the energy confinement time scale in response to the edge cooling. Measurements from a high resolution imaging x-ray spectrometer show that the ion temperature has a similar behaviour as the electron temperature in response to edge cooling, and that the transition density of non-locality correlates with the rotation reversal critical density. This connection may indicate the possible connection between thermal and momentum transport, which is also linked to a transition in turbulence dominance between trapped electron modes (TEMs) and ion temperature gradient (ITG) modes. Experiments with repetitive cold pulses in one discharge were also performed to allow Fourier analysis and to provide details of cold front propagation. These modulation experiments showed in LOC plasmas that the electron thermal transport is not purely diffusive, while in SOC the electron thermal transport is more diffusive like. Linear gyrokinetic simulations suggest the turbulence outside r/a = 0.75 changes from TEM dominance in LOC plasmas to ITG mode dominance in SOC plasmas.United States. Dept. of Energy (DoE Contract No DE-FC02-99ER54512)Oak Ridge Institute for Science and Education (DOE Fusion Energy Postdoctoral Research Program

Palliative care early in the care continuum among patients with serious respiratory illness an official ATS/AAHPM/HPNA/SWHPN policy statement

Background: Patients with serious respiratory illness and their caregivers suffer considerable burdens, and palliative care is a fundamental right for anyone who needs it. However, the overwhelming majority of patients do not receive timely palliative care before the end of life, despite robust evidence for improved outcomes. Goals: This policy statement by the American Thoracic Society (ATS) and partnering societies advocates for improved integration of high-quality palliative care early in the care continuum for patients with serious respiratory illness and their caregivers and provides clinicians and policymakers with a framework to accomplish this. Methods: An international and interprofessional expert committee, including patients and caregivers, achieved consensus across a diverse working group representing pulmonary–critical care, palliative care, bioethics, health law and policy, geriatrics, nursing, physiotherapy, social work, pharmacy, patient advocacy, psychology, and sociology. Results: The committee developed fundamental values, principles, and policy recommendations for integrating palliative care in serious respiratory illness care across seven domains: 1) delivery models, 2) comprehensive symptom assessment and management, 3) advance care planning and goals of care discussions, 4) caregiver support, 5) health disparities, 6) mass casualty events and emergency preparedness, and 7) research priorities. The recommendations encourage timely integration of palliative care, promote innovative primary and secondary or specialist palliative care delivery models, and advocate for research and policy initiatives to improve the availability and quality of palliative care for patients and their caregivers. Conclusions: This multisociety policy statement establishes a framework for early palliative care in serious respiratory illness and provides guidance for pulmonary–critical care clinicians and policymakers for its proactive integration

Understanding metric-related pitfalls in image analysis validation

Validation metrics are key for the reliable tracking of scientific progress and for bridging the current chasm between artificial intelligence (AI) research and its translation into practice. However, increasing evidence shows that particularly in image analysis, metrics are often chosen inadequately in relation to the underlying research problem. This could be attributed to a lack of accessibility of metric-related knowledge: While taking into account the individual strengths, weaknesses, and limitations of validation metrics is a critical prerequisite to making educated choices, the relevant knowledge is currently scattered and poorly accessible to individual researchers. Based on a multi-stage Delphi process conducted by a multidisciplinary expert consortium as well as extensive community feedback, the present work provides the first reliable and comprehensive common point of access to information on pitfalls related to validation metrics in image analysis. Focusing on biomedical image analysis but with the potential of transfer to other fields, the addressed pitfalls generalize across application domains and are categorized according to a newly created, domain-agnostic taxonomy. To facilitate comprehension, illustrations and specific examples accompany each pitfall. As a structured body of information accessible to researchers of all levels of expertise, this work enhances global comprehension of a key topic in image analysis validation.Comment: Shared first authors: Annika Reinke, Minu D. Tizabi; shared senior authors: Paul F. J\"ager, Lena Maier-Hei

Palliative care early in the care continuum among patients with serious respiratory illness - An official ATS/AAHPM/HPNA/SWHPN policy statement

Background: Patients with serious respiratory illness and their caregivers suffer considerable burdens, and palliative care is a fundamental right for anyone who needs it. However, the overwhelming majority of patients do not receive timely palliative care before the end of life, despite robust evidence for improved outcomes. Goals: This policy statement by the American Thoracic Society (ATS) and partnering societies advocates for improved integration of high-quality palliative care early in the care continuum for patients with serious respiratory illness and their caregivers and provides clinicians and policymakers with a framework to accomplish this. Methods: An international and interprofessional expert committee, including patients and caregivers, achieved consensus across a diverse working group representing pulmonary–critical care, palliative care, bioethics, health law and policy, geriatrics, nursing, physiotherapy, social work, pharmacy, patient advocacy, psychology, and sociology. Results: The committee developed fundamental values, principles, and policy recommendations for integrating palliative care in serious respiratory illness care across seven domains: 1) delivery models, 2) comprehensive symptom assessment and management, 3) advance care planning and goals of care discussions, 4) caregiver support, 5) health disparities, 6) mass casualty events and emergency preparedness, and 7) research priorities. The recommendations encourage timely integration of palliative care, promote innovative primary and secondary or specialist palliative care delivery models, and advocate for research and policy initiatives to improve the availability and quality of palliative care for patients and their caregivers. Conclusions: This multisociety policy statement establishes a framework for early palliative care in serious respiratory illness and provides guidance for pulmonary–critical care clinicians and policymakers for its proactive integration