2,371 research outputs found
H-alpha Stacked Images Reveal Large Numbers of PNe in the LMC
Our new, deep, high resolution H-alpha and matching R-band UKST multi-exposure stack of the central 25 sq. degrees of the LMC promises to provide an unprecedented homogeneous sample of >1,000 new PNe. Our preliminary 2dF spectroscopy on the AAT has vindicated our selection process and confirmed 136 new PNe and 57 emission-line stars out of a sample of 263 candidate sources within an initial 2.5 sq. deg. area. To date approximately one third of the entire LMC has been scanned for candidates (~7.5 sq.deg.). More than 750 new emission sources have been catalogued so far along with independent re-identification of all known and possible PNe found from other surveys. Once our image analysis is complete, we plan comprehensive spectroscopic follow-up of the whole sample, not only to confirm our PN candidates but also to derive nebula temperatures and densities which, with the aid of photoionization modeling, will yield stellar parameters which are vital for constructing H-R diagrams for these objects. A prime objective of the survey is to produce a Luminosity Function which will be the most accurate and comprehensive ever derived in terms of numbers, magnitude range and evolutionary state; offering significant new insights into the LMC's evolutionary history. The observation and measurement of our newly discovered AGB halos around 60% of these PN will also assist in determining the initial- to final-mass ratios for this phase of stellar evolution.postprin
Recommended from our members
Development of experimental verification techniques for non-linear deformation and fracture.
This project covers three distinct features of thin film fracture and deformation in which the current experimental technique of nanoindentation demonstrates limitations. The first feature is film fracture, which can be generated either by nanoindentation or bulge testing thin films. Examples of both tests will be shown, in particular oxide films on metallic or semiconductor substrates. Nanoindentations were made into oxide films on aluminum and titanium substrates for two cases; one where the metal was a bulk (effectively single crystal) material and the other where the metal was a 1 pm thick film grown on a silica or silicon substrate. In both cases indentation was used to produce discontinuous loading curves, which indicate film fracture after plastic deformation of the metal. The oxides on bulk metals fractures occurred at reproducible loads, and the tensile stress in the films at fracture were approximately 10 and 15 GPa for the aluminum and titanium oxides respectively. Similarly, bulge tests of piezoelectric oxide films have been carried out and demonstrate film fracture at stresses of only 100's of MPa, suggesting the importance of defects and film thickness in evaluating film strength. The second feature of concern is film adhesion. Several qualitative and quantitative tests exist today that measure the adhesion properties of thin films. A relatively new technique that uses stressed overlayers to measure adhesion has been proposed and extensively studied. Delamination of thin films manifests itself in the form of either telephone cord or straight buckles. The buckles are used to calculate the interfacial fracture toughness of the film-substrate system. Nanoindentation can be utilized if more energy is needed to initiate buckling of the film system. Finally, deformation in metallic systems can lead to non-linear deformation due to 'bursts' of dislocation activity during nanoindentation. An experimental study to examine the structure of dislocations around indentations has been carried out to demonstrate the effectiveness in evaluating cross slip and dislocation behavior around nanoindentation impressions in bulk engineering alloys
Recommended from our members
Reliability of materials in MEMS : residual stress and adhesion in a micro power generation system.
The reliability of thin film systems is important to the continued development of microelectronic and micro-electro-mechanical systems (MEMS). The reliability of these systems is often tied to the ability of the films to remain adhered to its substrate. By measuring the amount of energy to separate the film from the substrate, researchers can predicts film lifetimes. Recent work has resulted in several different testing techniques to measure this energy including spontaneous buckling, indentation induced delamination and four point bending. This report focuses on developing quantifiable adhesion measurements for multiple thin film systems used in MEMS and other thin film systems of interest to Sandia programs. First, methods of accurately assessing interfacial toughness using stressed overlayer methods are demonstrated using both the W/Si and Au/Si systems. For systems where fracture only occurs along the interface, such as Au/Si, the calculated fracture energies between different tests are identical if the energy put into the system is kept near the needed strain energy to cause delamination. When the energy in the system is greater than needed to cause delamination, calculated adhesion energies can increase by a factor of three due to plastic deformation. Dependence of calculated adhesion energies on applied energy in the system was also shown when comparisons of four point bending and stressed overlayer test methods were completed on Pt/Si systems. The fracture energies of Pt/Ti/SiO{sub 2} were studied using four-point bending and compressive overlayers. Varying the thickness of the Ti film from 2 to 17 nm in a Pt/Ti/SiO{sub 2} system, both test methods showed an increase of adhesion energy until the nominal Ti thickness was 12nm. Then the adhesion energy began to decrease. While the trends in toughness are similar, the magnitude of the toughness values measured between the test methods is not the same, demonstrating the difficulty in extracting mode I toughness as mixed mode loading approaches mode II conditions
Comparative study of Selva and Camarosa strawberries for the commercial market
Selva and Camarosa strawberry varieties were characterized chemically and physically. The importance
of keeping the stem until processing, the influence of different transport periods under refrigerated conditions,
the effects of freezing and exposure to air of damaged surfaces were evaluated. During freezing, losses of
ascorbic acid, sucrose, fructose and glucose were reported for both varieties. However, keeping the stem intact
minimizes the losses of ascorbic acid in frozen fruits. The exposure to air of cut surfaces affects ascorbic acid content
of fresh fruits, with the highest losses reported in Camarosa. Selva showed properties important for commercial use,
as compared to Camarosa, with regard to a higher resistance to thawing and higher contents of total phenolics, total
protein, and ascorbic acid
THE IMPRINTS OF THE GALACTIC BAR ON THE THICK DISK WITH RAVE
We study the kinematics of a local sample of stars, located within a cylinder of radius centered on the Sun, in the RAVE data set. We find clear asymmetries in the - velocity distributions of thin and thick disk stars: there are more stars moving radially outward for low azimuthal velocities and more radially inward for high azimuthal velocities. Such asymmetries have been previously reported for the thin disk as being due to the Galactic bar, but this is the first time that the same type of structures are seen in the thick disk. Our findings imply that the velocities of thick-disk stars should no longer be described by Schwarzschild's, multivariate Gaussian or purely axisymmetric distributions. Furthermore, the nature of previously reported substructures in the thick disk needs to be revisited as these could be associated with dynamical resonances rather than to accretion events. It is clear that dynamical models of the Galaxy must fit the 3D velocity distributions of the disks, rather than the projected 1D, if we are to understand the Galaxy fully
Combined Inflammatory and Metabolic Defects Reflected by Reduced Serum Protein Levels in Patients with Buruli Ulcer Disease
Buruli ulcer is a skin disease caused by Mycobacterium ulcerans that is spreading in tropical countries, with major public health and economic implications in West Africa. Multi-analyte profiling of serum proteins in patients and endemic controls revealed that Buruli ulcer disease down-regulates the circulating levels of a large array of inflammatory mediators, without impacting on the leukocyte composition of peripheral blood. Notably, several proteins contributing to acute phase reaction, lipid metabolism, coagulation and tissue remodelling were also impacted. Their down-regulation was selective and
persisted after the elimination of bacteria with antibiotic therapy. It involved proteins with various functions and origins, suggesting that M. ulcerans infection causes global and chronic defects in the host’s protein metabolism. Accordingly, patients had reduced levels of total serum proteins and blood urea, in the absence of signs of malnutrition, or functional failure of liver or kidney. Interestingly, slow healers had deeper metabolic and coagulation defects at the start of antibiotic therapy. In addition to providing novel insight into Buruli ulcer pathogenesis, our study therefore identifies a unique
proteomic signature for this disease
Inference of RNA Polymerase II Transcription Dynamics from Chromatin Immunoprecipitation Time Course Data
Gene transcription mediated by RNA polymerase II (pol-II) is a key step in gene expression. The dynamics of pol-II moving along the transcribed region influence the rate and timing of gene expression. In this work, we present a probabilistic model of transcription dynamics which is fitted to pol-II occupancy time course data measured using ChIP-Seq. The model can be used to estimate transcription speed and to infer the temporal pol-II activity profile at the gene promoter. Model parameters are estimated using either maximum likelihood estimation or via Bayesian inference using Markov chain Monte Carlo sampling. The Bayesian approach provides confidence intervals for parameter estimates and allows the use of priors that capture domain knowledge, e.g. the expected range of transcription speeds, based on previous experiments. The model describes the movement of pol-II down the gene body and can be used to identify the time of induction for transcriptionally engaged genes. By clustering the inferred promoter activity time profiles, we are able to determine which genes respond quickly to stimuli and group genes that share activity profiles and may therefore be co-regulated. We apply our methodology to biological data obtained using ChIP-seq to measure pol-II occupancy genome-wide when MCF-7 human breast cancer cells are treated with estradiol (E2). The transcription speeds we obtain agree with those obtained previously for smaller numbers of genes with the advantage that our approach can be applied genome-wide. We validate the biological significance of the pol-II promoter activity clusters by investigating cluster-specific transcription factor binding patterns and determining canonical pathway enrichment. We find that rapidly induced genes are enriched for both estrogen receptor alpha (ER) and FOXA1 binding in their proximal promoter regions.Peer reviewe
The R-Process Alliance: Fourth Data Release from the Search for R-process-enhanced Stars in the Galactic Halo
This compilation is the fourth data release from the R-Process Alliance (RPA) search for r-process-enhanced stars and the second release based on "snapshot" high-resolution (R ~ 30,000) spectra collected with the du Pont 2.5 m Telescope. In this data release, we propose a new delineation between the r-I and r-II stellar classes at , instead of the empirically chosen level previously in use, based on statistical tests of the complete set of RPA data released to date. We also statistically justify the minimum level of [Eu/Fe] for definition of the r-I stars, [Eu/Fe] > +0.3. Redefining the separation between r-I and r-II stars will aid in the analysis of the possible progenitors of these two classes of stars and determine whether these signatures arise from separate astrophysical sources at all. Applying this redefinition to previous RPA data, the number of identified r-II and r-I stars changes to 51 and 121, respectively, from the initial set of data releases published thus far. In this data release, we identify 21 new r-II, 111 new r-I (plus 3 re-identified), and 7 new (plus 1 re-identified) limited-r stars out of a total of 232 target stars, resulting in a total sample of 72 new r-II stars, 232 new r-I stars, and 42 new limited-r stars identified by the RPA to date
Factors influencing the approaches to studying of preclinical and clinical students and postgraduate trainees
<p>Abstract</p> <p>Background</p> <p>Students can be classified into three categories depending on their approaches to studying; namely, deep approach (DA), strategic approach (SA) and surface apathetic or superficial approach (SAA). The aim of this study was to identify factors affecting the approaches to studying among Sri Lankan medical undergraduates and post graduate trainees and to analyze the change in the pattern of study skills with time and experience.</p> <p>Method</p> <p>Pre-clinical and clinical students of the Faculty of Medicine, University of Colombo and postgraduate trainees in Surgery at the National Hospital of Sri Lanka were invited to complete the Approaches and Study Skills Inventory for Students (ASSIST) questionnaire.</p> <p>Results</p> <p>A total of 187 pre clinical (M: F = 96:91), 124 clinical (M: F = 61:63) and 53 post graduate trainees (M: F = 50:3) participated in the study. Approaches of male and female students were similar. SA was significantly affected by age among the preclinical students (p = 0.01), but not in other groups. Among pre-clinical students, males preferred a teacher who supported understanding (p = 0.04) but females preferred a passive transmission of information (p < 0.001). This, too, was not visible among other groups. A linear regression performed on group (batch), gender, island rank at GCE Advance Level (AL) examination, self appraisal score and the preference scores of type of teacher only managed to explain 35% or less of variance observed for each approach in individual groups.</p> <p>Conclusion</p> <p>Different factors affect the approach to studying in different groups but these explain only a small fraction of the variance observed.</p
- …