O2 Loaded Germanosilicate Optical Fibers: Experimental In Situ Investigation and Ab Initio Simulation Study of GLPC Evolution under Irradiation

In this work we present a combined experimental and ab initio simulation investigation concerning the Germanium Lone Pair Center (GLPC), its interaction with molecular oxygen (O2), and evolution under irradiation. First, O2 loading has been applied here to Ge-doped optical fibers to reduce the concentration of GLPC point defects. Next, by means of cathodoluminescence in situ experiments, we found evidence that the 10 keV electron irradiation of the treated optical fibers induces the generation of GLPC centers, while in nonloaded optical fibers, the irradiation causes the bleaching of the pre-existing GLPC. Ab initio calculations were performed to investigate the reaction of the GLPC with molecular oxygen. Such investigations suggested the stability of the dioxagermirane (DIOG) bulk defect, and its back conversion into GLPC with a local release of O2 under irradiation. Furthermore, it is also inferred that a remarkable portion of the O2 passivated GLPC may form Ge tetrahedra connected to peroxy bridges. Such structures may have a larger resistance to the irradiation and not be back converted into GLPC

Radiation Hardened Architecture of a Single-Ended Raman-Based Distributed Temperature Sensor

Raman-based Distributed Temperature Sensors (RDTS) allow performing spatially resolved (1 m) reliable temperature measurements over several km long Optical Fibers (OFs). These systems are based on the temperature dependence of the intensities of both the Stokes and anti-Stokes components of the Raman back-scattered signal. One of the specific issues associated with RDTS technology in radiation environments is the differential Radiation Induced Attenuation (RIA) between the two components that induces huge errors in the temperature evaluation. Such problem is particularly evident for commercially available single-ended DTS using one laser source. Double-ended configuration could be used to correct for the differential attenuation but are limited by RIA in terms of sensing range. In the present work, we show how a Radiation-Hardened-by-Design DTS (RHD-DTS) overcomes the observed radiation issues keeping the single-ended interrogation scheme. In the tested RHD-DTS two infrared excitation laser sources (~1550 nm and ~1650 nm) are employed: the wavelength of the Stokes component due to the first excitation source coincides with the wavelength of the second excitation; vice versa, the wavelength of the anti-Stokes component due to the second excitation source coincides with the wavelength of the first excitation. The overall result is that the two signal intensities are automatically corrected for the differential RIA all along the OF sensor length and the temperature measurements becomes robust against radiation effects. This study demonstrates the potential of such a sensor by reporting preliminary experimental results obtained with a prototype developed by Viavi Solutions exploiting radiation-sensitive or radiation-hardened optical fibers

Probing densified silica glass structure by molecular oxygen and E’ center formation under electron irradiation

Abstract This study aims to learn more about the structure of densified silica with focus on the metamict-like silica phase (density = 2.26 g/cm3) by examining the formation of E’ point defects and interstitial molecular oxygen O2 by 2.5 MeV electron irradiation. High-dose (11 GGy) irradiation creates a metamict-like phase and a large amount of interstitial O2, which is destroyed upon subsequent additional lower-dose electron irradiation. The O2 cathodoluminescence (CL) data indicate that the formation of O2 from peroxy linkages Si–O–O–Si in silica network is strongly dependent on the intertetrahedral void sizes. The position and shape of the O2 emission line support the idea that the configuration of these voids in metamict phase is close to that of non-densified silica. Moreover, data support the strong correlation between the formation of 3-membered rings of Si–O bonds and E’-centers when silica density increases from 2.20 to 2.26 g/cm3

Radiation-Induced Attenuation in Single-Mode Phosphosilicate Optical Fibers for Radiation Detection

International audienceWe investigated the online radiation-induced attenuation of two single-mode optical fibers (OFs) that were X-rays irradiated with doses up to 100 kGy(SiO2) at room temperature at 10.7 Gy/s. One of the two samples was doped only with phosphorous, whereas the other was codoped with phosphorous and cerium. Both OF types are very radiation sensitive in the near-infrared (NIR) domain and of interest for applications involving radiation detection. The addition of Ce to the P-doped core lowers the radiation sensitivity of the OF and introduces a spontaneous postirradiation recovery process at room temperature, which is negligible in the purely P-doped OF. We show that the diffusion of molecular hydrogen into the OFs allows the full recovery of the NIR losses caused by radiation-induced P-related point defects. However, the radiation response of the H2-regenarated samples is substantially different from that of the pristine ones. We conclude that the H2-loading procedure cannot be at the moment considered as a valid technique for the regeneration of a depleted P-doped OF radiation sensor

The optical fiber (OF) silica glass compaction is the least studied effect induced by radiation, since it takes place at very high fluences, mainly in mixed environments combining γ-rays and neutrons. Although the radiation-induced structural reorganization has already been investigated in bulk materials, OFs are a more complex case study, due to its inhomogeneous nature and internal stress distribution. We hereby investigate the structural changes induced in a pure-silica core OF by fast neutron fluence of up to 5 × 1019 n/cm² and total γ-dose of ∼4 GGy(SiO2), through micro-Raman spectroscopy allowing us to study the radial distribution of several signatures. The structural changes induced by neutrons on this OF are weaker than those observed on bulk glass at similar fluences, in agreement with the lower observed compaction. The main cause is the higher irradiation temperature, even if a key role is played by the internal stress present in the fibers.

International audienc

Irradiation temperature effects on the induced point defects in Ge-doped optical fibers

We present an experimental investigation on the combined effects of temperature and irradiation on Ge-doped optical fibers. Our samples were X-ray (10 keV) irradiated up to 5 kGy with a dose rate of 50 Gy(SiO2)/s changing the irradiation temperature in the range 233-573 K. After irradiation we performed electron paramagnetic resonance (EPR) and confocal microscopy luminescence (CML) measurements. The recorded data prove the generation of different Ge related paramagnetic point defects and of a red emission, different from that of the Ge/Si Non-Bridging Oxygen Hole center. Furthermore, by comparing the behaviour of the EPR signal of the Ge(1) as a function of the irradiation temperature with the one of the red emission we can exclude that this emission is originated by the Ge(1)

Ge-doped silica nanoparticles: production and characterisation

International audienceSilica nanoparticles were produced from germanosilicate glasses by KrF laser irradiation. The samples were investigated by cathodoluminescence and scanning electron microscopy, providing the presence of nanoparticles with size from tens up to hundreds of nanometers. The emission of the Germanium lone pair center is preserved in the nanoparticles and atomic force microscopy revealed the presence of no spherical particles with a size smaller than ~4 nm. The absorption coefficient enhancement induced by Ge doping is reputed fundamental to facilitate the nanoparticles production. This procedure can be applied to other co-doped silica materials to tune the nanoparticles features

Overview of radiation induced point defects in silica-based optical fibers

Silica-based optical fibers, fiber-based devices and optical fiber sensors are today integrated in a variety of harsh environments associated with radiation constraints. Under irradiation, the macroscopic properties of the optical fibers are modified through three main basic mechanisms: the radiation induced attenuation, the radiation induced emission and the radiation induced refractive index change. Depending on the fiber profile of use, these phenomena differently contribute to the degradation of the fiber performances and then have to be either mitigated for radiation tolerant systems or exploited to design radiation detectors and dosimeters. Considering the strong impact of radiation on key applications such as data transfer or sensing in space, fusion and fission-related facilities or high energy physics facilities, since 1970′s numerous experimental and theoretical studies have been conducted to identify the microscopic origins of these changes. The observed degradation can be explained through the generation by ionization or displacement damages of point defects in the differently doped amorphous glass (SiO 2 ) of the fiber's core and cladding layers. Indeed, the fiber chemical composition (dopants/concentrations) and elaboration processes play an important role. Consequently, identifying the nature, the properties and the generation and bleaching mechanisms of these point defects is mandatory in order to imagine ways to control the fiber radiation behaviors. In this review paper, the responses of the main classes of silica-based optical fibers are presented: radiation tolerant pure-silica core or fluorine doped optical fibers, germanosilicate optical fibers and radiation sensitive phosphosilicate and aluminosilicate optical fibers. Our current knowledge about the nature and optical properties of the point defects related to silica and these main dopants is presented. The efficiency of the known defects to reproduce the transient and steady state radiation induced attenuation between 300 nm and 2 µm wavelength range is discussed. The main parameters, related to the fibers themselves or extrinsic - harsh environments, profile of use - affecting the concentration, growth and decay kinetics of those defects are also reviewed. Finally, the main remaining challenges are discussed, including the increasing needs for accurate and multi-physics modeling tools