26,398 research outputs found
Fluctuating surface pressure measurements on USB wing using two types of transducers
Measurements of the fluctuating pressures on the wing surface of an upper-surface-blown powered-lift model and a JT15 engine were obtained using two types of pressure transducers. The pressures were measured using overall-fluctuating pressures and power spectral density analyses for various thrust settings and two jet impingement angles. Comparison of the data from the two transducers indicate that similar results are obtained in the lower frequency ranges for both transducers. The data also indicate that for this configuration, the highest pressure levels occur at frequencies below 2000 Hz
USB environment measurements based on full-scale static engine ground tests
Flow turning parameters, static pressures, surface temperatures, surface fluctuating pressures and acceleration levels were measured in the environment of a full-scale upper surface blowing (USB) propulsive lift test configuration. The test components included a flightworthy CF6-50D engine, nacelle, and USB flap assembly utilized in conjunction with ground verification testing of the USAF YC-14 Advanced Medium STOL Transport propulsion system. Results, based on a preliminary analysis of the data, generally show reasonable agreement with predicted levels based on model data. However, additional detailed analysis is required to confirm the preliminary evaluation, to help delineate certain discrepancies with model data, and to establish a basis for future flight test comparisons
THE GENERALIZED COMPOSITE COMMODITY THEOREM AND FOOD DEMAND ESTIMATION
This paper reports tests of aggregation over consumer food products and estimates of aggregate food demand elasticities. Evidence that food demand variables follow unit root processes leads us to build on and simplify tests of the Generalized Composite Commodity Theorem found in the literature. We compute food demand elasticities using cointegration applied to a convenient but nonlinear functional form. Estimates are based on consumer reported expenditure data rather than commercial disappearance data.Demand and Price Analysis,
Perturbation Theory of Schr\"odinger Operators in Infinitely Many Coupling Parameters
In this paper we study the behavior of Hamilton operators and their spectra
which depend on infinitely many coupling parameters or, more generally,
parameters taking values in some Banach space. One of the physical models which
motivate this framework is a quantum particle moving in a more or less
disordered medium. One may however also envisage other scenarios where
operators are allowed to depend on interaction terms in a manner we are going
to discuss below. The central idea is to vary the occurring infinitely many
perturbing potentials independently. As a side aspect this then leads naturally
to the analysis of a couple of interesting questions of a more or less purely
mathematical flavor which belong to the field of infinite dimensional
holomorphy or holomorphy in Banach spaces. In this general setting we study in
particular the stability of selfadjointness of the operators under discussion
and the analyticity of eigenvalues under the condition that the perturbing
potentials belong to certain classes.Comment: 25 pages, Late
High-resolution 3D weld toe stress analysis and ACPD method for weld toe fatigue crack initiation
Weld toe fatigue crack initiation is highly dependent on the local weld toe stress-concentrating geometry including any inherent flaws. These flaws are responsible for premature fatigue crack initiation (FCI) and must be minimised to maximise the fatigue life of a welded joint. In this work, a data-rich methodology has been developed to capture the true weld toe geometry and resulting local weld toe stress-field and relate this to the FCI life of a steel arc-welded joint. To obtain FCI lives, interrupted fatigue test was performed on the welded joint monitored by a novel multi-probe array of alternating current potential drop (ACPD) probes across the weld toe. This setup enabled the FCI sites to be located and the FCI life to be determined and gave an indication of early fatigue crack propagation rates. To understand fully the local weld toe stress-field, high-resolution (5 mu m) 3D linear-elastic finite element (FE) models were generated from X-ray micro-computed tomography (mu-CT) of each weld toe after fatigue testing. From these models, approximately 202 stress concentration factors (SCFs) were computed for every 1 mm of weld toe. These two novel methodologies successfully link to provide an assessment of the weld quality and this is correlated with the fatigue performance
The last glacial-interglacial cycle in Lake Ohrid (Macedonia/Albania): testing diatom response to climate
Lake Ohrid is a site of global importance for palaeoclimate research. This study presents results of diatom analysis of a ca. 136 ka sequence, Co1202, from the northeast of the lake basin. It offers the opportunity to test diatom response across two glacial-interglacial transitions and within the Last Glacial, while setting up taxonomic protocols for future research. The results are outstanding in demonstrating the sensitivity of diatoms to climate change, providing proxy evidence for temperature change marked by glacial-interglacial shifts between the dominant planktonic taxa, Cyclotella fottii and C. ocellata, and exact correlation with geochemical proxies to mark the start of the Last Interglacial at ca. 130 ka. Importantly, diatoms show much stronger evidence in this site for warming during MIS3 than recorded in other productivity-related proxies, peaking at ca. 39 ka, prior to the extreme conditions of the Last Glacial maximum. In the light of the observed patterns, and from the results of analysis of early Holocene sediments from a second core, Lz1120, the lack of a response to Late Glacial and early Holocene warming from ca. 15-7.4 ka suggests the Co1202 sequence may be compromised during this phase. After ca. 7.4 ka, there is evidence for enhanced nutrient enrichment compared to the Last Interglacial, following by a post-Medieval cooling trend. Taxonomically, morphological variability in C. fottii shows no clear trends linked to climate, but an intriguing change in central area morphology occurs after ca. 48.7 ka, coincident with a tephra layer. In contrast, C. ocellata shows morphological variation in the number of ocelli between interglacials, suggesting climatically-forced variation or evolutionary selection pressure. The application of a simple dissolution index does not track preservation quality very effectively, underlining the importance of diatom concentration data in future studies
Quantum Layers over Surfaces Ruled Outside a Compact Set
In this paper, we proved the quantum layer over a surface which is ruled
outside a compact set, asymptotically flat but not totally geodesic admits
ground states
Some remarks on quasi-Hermitian operators
A quasi-Hermitian operator is an operator that is similar to its adjoint in
some sense, via a metric operator, i.e., a strictly positive self-adjoint
operator. Whereas those metric operators are in general assumed to be bounded,
we analyze the structure generated by unbounded metric operators in a Hilbert
space. Following our previous work, we introduce several generalizations of the
notion of similarity between operators. Then we explore systematically the
various types of quasi-Hermitian operators, bounded or not. Finally we discuss
their application in the so-called pseudo-Hermitian quantum mechanics.Comment: 18page
Curved planar quantum wires with Dirichlet and Neumann boundary conditions
We investigate the discrete spectrum of the Hamiltonian describing a quantum
particle living in the two-dimensional curved strip. We impose the Dirichlet
and Neumann boundary conditions on opposite sides of the strip. The existence
of the discrete eigenvalue below the essential spectrum threshold depends on
the sign of the total bending angle for the asymptotically straight strips.Comment: 7 page
Temporal Ordering in Quantum Mechanics
We examine the measurability of the temporal ordering of two events, as well
as event coincidences. In classical mechanics, a measurement of the
order-of-arrival of two particles is shown to be equivalent to a measurement
involving only one particle (in higher dimensions). In quantum mechanics, we
find that diffraction effects introduce a minimum inaccuracy to which the
temporal order-of-arrival can be determined unambiguously. The minimum
inaccuracy of the measurement is given by dt=1/E where E is the total kinetic
energy of the two particles. Similar restrictions apply to the case of
coincidence measurements. We show that these limitations are much weaker than
limitations on measuring the time-of-arrival of a particle to a fixed location.Comment: New section added, arguing that order-of-arrival can be measured more
accurately than time-of-arrival. To appear in Journal of Physics
- …