Densification of Kapok Wood (Ceiba Pentandra L. Gaertn) and Its Radiation Curing of Surface Coatings Using Ultra-violet

Densification and surface coating of kapok wood (Ceiba pentandra L. Gaertn ) have been conducted by pressing and followed by radiation curing of surface coatings using Ultra Violet (UV) light. Pressing was performed to get thickness reduction level of 15, 30, 45, 60 and 75 %. Coating was conducted using unsaturated polyester resin after mixing with 2,2-dimethyl-2-hydroxy acetophenone photoinitiator at concentration level of 1, 2 and 3 %b.w and titanium dioxide pigment. Irradiation was carried out at conveyor speed of 1, 2 and 3 m/minute. Pressing of wood up to 75% thickness reduction resulted in increasing of density significantly and decreasing of thickness swelling. At variation of photoinitiator concentration and conveyor speed used, the coating had pendulum hardness of 23-37 seconds, color value (white) with L = 61-79 %, gloss (60o) = 16-56 %, adhesion met the ASTM standard and resistant to chemicals and solvents used except against 10 % sodium hydroxide solution

Shirkat Town Monitoring Using Digital Elevation Model

In this search, a colored image of French satellite SPOT, of Shirkat country in Salahadeen was used with resolution about (5m) for an area with dimensions (4km×8km), and a digital elevation model (DEM) with grids (20m×20m) and levels reach to (1m) resolution from the same satellite for the same country, with an image taken from the IKONOS satellite with (1m) resolution, in addition to master plan and administrative map for the same area. The IKONOS satellite image processed digitally, and intersected with the DEM, to create a three dimensional model for the area under study, with resolution about (1mm), by the use of AutoCAD and GIS programs, and making a comparison between the field survey and the images information, resulting extensive information about the levels in shirkat country streets and the surrounding buildings, and an attributive results about the agricultural or desert spaces around the country

Assessing emergency medical care in low income countries: A pilot study from Pakistan

Background: Emergency Medical Care is an important component of health care system. Unfortunately it is however, ignored in many low income countries. We assessed the availability and quality of facility-based emergency medical care in the government health care system at district level in a low income country - Pakistan. Methods: We did a quantitative pilot study of a convenience sample of 22 rural and 20 urban health facilities in 2 districts - Faisalabad and Peshawar - in Pakistan. The study consisted of three separate cross-sectional assessments of selected community leaders, health care providers, and health care facilities. Three data collection instruments were created with input from existing models for facility assessment such as those used by the Joint Commission of Accreditation of Hospitals and the National Center for Health Statistics in USA and the Medical Research Council in Pakistan. Results: The majority of respondents 43/44(98%), in community survey were not satisfied with the emergency care provided. Most participants 36/44(82%) mentioned that they will not call an ambulance in health related emergency because it does not function properly in the government system. The expenses on emergency care for the last experience were reported to be less than 5,000 Pakistani Rupees (equivalent to US$ 83) for 19/29(66%) respondents. Most health care providers 43/44(98%) were of the opinion that their facilities were inadequately equipped to treat emergencies. The majority of facilities 31/42(74%) had no budget allocated for emergency care. A review of medications and equipment available showed that many critical supplies needed in an emergency were not found in these facilities. Conclusion: Assessment of emergency care should be part of health systems analysis in Pakistan. Multiple deficiencies in emergency care at the district level in Pakistan were noted in our study. Priority should be given to make emergency care responsive to needs in Pakistan. Specific efforts should be directed to equip emergency care at district facilities and to organize an ambulance network

Dead on arrival in a low-income country: results from a multicenter study in Pakistan

BACKGROUND: This study assessed the characteristics of dead on arrival (DOA) patients in Pakistan. METHODS: Data about the DOA patients were extracted from Pakistan National Emergency Department Surveillance study (Pak-NEDS). This study recruited all ED patients presenting to seven tertiary care hospitals during a four-month period between November 2010 and March 2011. This study included patients who were declared dead-on-arrival by the ED physician. RESULTS: A total of 1,557 DOA patients (7 per 1,000 visits) were included in the Pak-NEDS. Men accounted for two-thirds (64%) of DOA patients. Those aged 20-49 years accounted for about 46% of DOA patients. Nine percent (n = 72) of patients were brought by ambulance, and most patients presented at a public hospital (80%). About 11% of DOA patients had an injury. Factors significantly associated (p \u3c 0.05) with ambulance use were men (adjusted odds ratio [aOR] = 2.72), brought to a private hospital (OR = 2.74), and being injured (aOR = 1.89). Cardiopulmonary resuscitation (CPR) was performed on 6% (n = 42) of patients who received treatment. Those brought to a private hospital were more likely to receive CPR (aOR = 2.81). CONCLUSION: This study noted a higher burden of DOA patients in Pakistan compared to other resourceful settings (about 1 to 2 per 1,000 visits). A large proportion of patients belonging to productive age groups, and the low prevalence of ambulance and CPR use, indicate a need for improving the prehospital care and basic life support training in pakistan

A Two-Phase Approach for Semi-Supervised Feature Selection

This paper proposes a novel approach for selecting a subset of features in semi-supervised datasets where only some of the patterns are labeled. The whole process is completed in two phases. In the first phase, i.e., Phase-I, the whole dataset is divided into two parts: The first part, which contains labeled patterns, and the second part, which contains unlabeled patterns. In the first part, a small number of features are identified using well-known maximum relevance (from first part) and minimum redundancy (whole dataset) based feature selection approaches using the correlation coefficient. The subset of features from the identified set of features, which produces a high classification accuracy using any supervised classifier from labeled patterns, is selected for later processing. In the second phase, i.e., Phase-II, the patterns belonging to the first and second part are clustered separately into the available number of classes of the dataset. In the clusters of the first part, take the majority of patterns belonging to a cluster as the class for that cluster, which is given already. Form the pairs of cluster centroids made in the first and second part. The centroid of the second part nearest to a centroid of the first part will be paired. As the class of the first centroid is known, the same class can be assigned to the centroid of the cluster of the second part, which is unknown. The actual class of the patterns if known for the second part of the dataset can be used to test the classification accuracy of patterns in the second part. The proposed two-phase approach performs well in terms of classification accuracy and number of features selected on the given benchmarked datasets.</jats:p

Emergency and critical care services in Tanzania: a survey of ten hospitals.

While there is a need for good quality care for patients with serious reversible disease in all countries in the world, Emergency and Critical Care tends to be one of the weakest parts of health systems in low-income countries. We assessed the structure and availability of resources for Emergency and Critical Care in Tanzania in order to identify the priorities for improving care in this neglected specialty. Ten hospitals in four regions of Tanzania were assessed using a structured data collection tool. Quality was evaluated with standards developed from the literature and expert opinion. Important deficits were identified in infrastructure, routines and training. Only 30% of the hospitals had an emergency room for adult and paediatric patients. None of the seven district and regional hospitals had a triage area or intensive care unit for adults. Only 40% of the hospitals had formal systems for adult triage and in less than one third were critically ill patients seen by clinicians more than once daily. In 80% of the hospitals there were no staff trained in adult triage or critical care. In contrast, a majority of equipment and drugs necessary for emergency and critical care were available in the hospitals (median 90% and 100% respectively. The referral/private hospitals tended to have a greater overall availability of resources (median 89.7%) than district/regional hospitals (median 70.6). Many of the structures necessary for Emergency and Critical Care are lacking in hospitals in Tanzania. Particular weaknesses are infrastructure, routines and training, whereas the availability of drugs and equipment is generally good. Policies to improve hospital systems for the care of emergency and critically ill patients should be prioritised

Development of Photonic Crystal Fiber Based Gas/ Chemical Sensors

The development of highly-sensitive and miniaturized sensors that capable of real-time analytes detection is highly desirable. Nowadays, toxic or colorless gas detection, air pollution monitoring, harmful chemical, pressure, strain, humidity, and temperature sensors based on photonic crystal fiber (PCF) are increasing rapidly due to its compact structure, fast response and efficient light controlling capabilities. The propagating light through the PCF can be controlled by varying the structural parameters and core-cladding materials, as a result, evanescent field can be enhanced significantly which is the main component of the PCF based gas/chemical sensors. The aim of this chapter is to (1) describe the principle operation of PCF based gas/ chemical sensors, (2) discuss the important PCF properties for optical sensors, (3) extensively discuss the different types of microstructured optical fiber based gas/ chemical sensors, (4) study the effects of different core-cladding shapes, and fiber background materials on sensing performance, and (5) highlight the main challenges of PCF based gas/ chemical sensors and possible solutions

High-normal blood glucose levels may be associated with decreased spatial perception in young healthy adults.

The negative effects of high normal glucose on cognitive function were previously reported in euglycemic individuals of middle age and the elderly population. This study aimed at examining the effect of baseline blood glucose levels on spatial ability, specifically verticality perception on the computerized rod and frame test (CRFT) in young healthy adults. 63 healthy male medical students (age range from 18-23 years), of whom 30 were non-fasting outside the month of Ramadan and 33 fasting during Ramadan of the year 2016, were recruited in order to create varying degrees of glycemia during which verticality perception was carried out. Baseline blood glucose reading was obtained prior to commencing the CRFT test. Blood glucose levels at the time of testing decreased as the duration between the last meal and testing increased. A blood glucose range of 62-117 mg/dl was achieved among participants for this study. Linear regression analysis showed that blood glucose level at testing correlated positively with all alignment spatial error parameters, indicating a probable reduction of spatial perception ability with higher blood glucose levels. These results are consistent with other cognitive studies in older healthy humans and emphasize the critical impact of early glucose dys-homeostasis on cognitive function. They also indicate that elevated blood glucose may affect cognitive functioning outside of the usual complications of diabetes

Centrifugal melt spinning of polyvinylpyrrolidone (PVP)/triacontene copolymer fibres

Polyvinylpyrrolidone/1-triacontene (PVP/TA) copolymer fibre webs produced by centrifugal melt spinning were studied to determine the influence of jet rotation speed on morphology and internal structure as well as their potential utility as adsorbent capture media for disperse dye effluents. Fibres were produced at 72 C with jet head rotation speeds from 7000 to 15,000 r min-1. The fibres were characterised by means of SEM, XRD and DSC. Adsorption behaviour was investigated by means of an isothermal bottle point adsorption study using a commercial disperse dye, Dianix AC-E. Through centrifugal spinning nanofibers and microfibers could be produced with individual fibres as fine as 200–300 nm and mean fibre diameters of ca. 1–2 lm. The PVP/TA fibres were mechanically brittle with characteristic brittle tensile fracture regions observed at the fibre ends. DSC and XRD analyses suggested that this brittleness was linked to the graft chain crystallisation where the PVP/TA was in the form of a radial brush copolymer. In this structure, the triacontene branches interlock and form small lateral crystals around an amorphous backbone. As an adsorbent, the PVP/TA fibres were found to adsorb 35.4 mg g-1 compared to a benchmark figure of 30.0 mg g-1 for a granular-activated carbon adsorbent under the same application conditions. PVP/TA is highly hydrophobic and adsorbs disperse dyes through the strong ‘‘hydrophobic bonding’’ interaction. Such fibrous assemblies may have applications in the targeted adsorption and separation of non-polar species from aqueous or polar environments

Alcohol and marijuana use while driving-an unexpected crash risk in Pakistani commercial drivers: a cross-sectional survey

Background:A significant proportion of road traffic crashes are attributable to alcohol and marijuana use while driving globally. Sale and use of both substances is illegal in Pakistan and is not considered a threat for road traffic injuries. However literature hints that this may not be the case. We did this study to assess usage of alcohol and marijuana in Pakistani commercial drivers.Methods:A sample of 857 commercial bus and truck drivers was interviewed in October 2008 at the largest commercial vehicle station in Rawalpindi and Islamabad, Pakistan. Time location cluster sampling was used to select the subjects and a structured questionnaire was used to assess the basic demographic profile, substance abuse habits of the drivers while on the road, and reasons for usage of illicit substances while driving were recorded. Self reported information was collected after obtaining informed consent. Chi square and fisher exact tests were used to assess differences between groups and logistic regression was used to identify significant associations between driver characteristics and alcohol and marijuana use.Results:Almost 10% of truck drivers use alcohol while driving on Pakistani roads. Marijuana use is almost 30% in some groups. Statistically different patterns of usage are seen between population subgroups based on age, ethnicity, education, and marital status. Regression analysis shows association of alcohol and marijuana use with road rage and error behaviours, and also with an increased risk of being involved in road crashes. The reported reasons for using alcohol or marijuana show a general lack of awareness of the hazardous nature of this practice among the commercial driver population.Conclusion:Alcohol and marijuana use is highly prevalent in Pakistani commercial drivers. The issue needs to be recognized by concerned authorities and methods such as random breath tests and sobriety check points need to be employed for proper law enforcement