6 research outputs found
Dihexyl-Substituted Poly(3,4-Propylenedioxythiophene) as a Dual Ionic and Electronic Conductive Cathode Binder for Lithium-Ion Batteries
The polymer binders used in most lithium-ion batteries (LIBs) serve only a structural role, but there are exciting opportunities to increase performance by using polymers with combined electronic and ionic conductivity. To this end, here we examine dihexyl-substituted poly(3,4-propylenedioxythiophene) (PProDOT-Hx₂) as an electrochemically stable π-conjugated polymer that becomes electrically conductive (up to 0.1 S cm⁻¹) upon electrochemical doping in the potential range of 3.2 to 4.5 V (vs Li/Li⁺). Because this family of polymers is easy to functionalize, can be effectively fabricated into electrodes, and shows mixed electronic and ionic conductivity, PProDOT-Hx₂ shows promise for replacing the insulating polyvinylidene fluoride (PVDF) commonly used in commercial LIBs. A combined experimental and theoretical study is presented here to establish the fundamental mixed ionic and electronic conductivity of PProDOT-Hx₂. Electrochemical kinetics and electron spin resonance are first used to verify that the polymer can be readily electrochemically doped and is chemically stable in a potential range of interest for most cathode materials. A novel impedance method is then used to directly follow the evolution of both the electronic and ionic conductivity as a function of potential. Both values increase with electrochemical doping and stay high across the potential range of interest. A combination of optical ellipsometry and grazing incidence wide angle X-ray scattering is used to characterize both solvent swelling and structural changes that occur during electrochemical doping. These experimental results are used to calibrate molecular dynamics simulations, which show improved ionic conductivity upon solvent swelling. Simulations further attribute the improved ionic conductivity of PProDOT-Hx₂ to its open morphology and the increased solvation is possible because of the oxygen-containing propylenedioxythiophene backbone. Finally, the performance of PProDOT-Hx₂ as a conductive binder for the well-known cathode LiNi_(0.8)Co_(0.15)Al_(0.05)O₂ relative to PVDF is presented. PProDOT-Hx₂-based cells display a fivefold increase in capacity at high rates of discharge compared to PVDF-based electrodes at high rates and also show improved long-term cycling stability. The increased rate capability and cycling stability demonstrate the benefits of using binders such as PProDOT-Hx₂, which show good electronic and ionic conductivity, combined with electrochemical stability over the potential range for standard cathode operation
Recommended from our members
The role of ionic interactions on structure and transport in conjugated polymeric mixed conductors
Simultaneous ion and electron conduction is a critical property of many material systems and is essential for applications ranging from fuel cells to batteries to bioelectronics. Conjugated polymers are uniquely suited to support both ionic and electronic transport because organic synthesis and molecular design strategies can be readily implemented to tailor their ionic, electronic, and structural properties. However, the molecular scale interactions that dictate simultaneous ionic and electronic transport are not well understood. This work aims to probe the fundamental physical phenomenon that effect electronic and ionic transport in mixed ion and electron conducting conjugated polymers. A controlled ion gated transistor model system is first developed and employed to probe the role of the ion distribution in conjugated polymers on the mechanism of electron transport on the nanometer crystalline scale. To further probe the role of interactions on the molecular scale, an electrochemical doping framework is used to change the charge density of counterions to electronic charges in conjugated polymers, which reveals the inter-relation between ion-electron Coulomb interactions, structure, and electronic mobility. Finally, the macroscopic ionic and electronic transport in a bulk conjugated polymeric mixed conductor is investigated, and the mechanism of transport is characterized via investigation of the nanoscale structure
Double Doping of Semiconducting Polymers Using Ion-Exchange with a Dianion
The interactions between counterions and electronic carriers in electrically doped semiconducting polymers are important for delocalization of charge carriers, electronic conductivity, and thermal stability. The introduction of a dianions in semiconducting polymers leads to double doping where there is one counterion for two charge carriers. Double doping minimizes structural distortions, but changes the electrostatic interactions between the carriers and counterions. Polymeric ionic liquids (PIL) with croconate dianions are helpful\ua0to investigate the role of the counterion in p-type semiconducting polymers. PILs prevent diffusion of the cation into the semiconducting polymers during ion exchange. The redox-active croconate dianions undergo ion exchange with doped semiconducting polymers depending on their ionization energy. Croconate dianions are found to reduce doped films of poly(3-hexyl thiophene), but undergo ion exchange with a polythiophene with tetraethylene glycol side chains, P(g42T-T), that has a lower ionization energy. The croconate dianion maintains crystalline order in P(g42T-T) and leads to a lower activation energy for the electrical conductivity than PF6− counterions. The control of the doping level with croconate allows optimization of the thermoelectric performance of the semiconducting polymer. The thermal stability of the doped films of P(g42T-T) is found to depend strongly on the nature of the counterion
Tailoring the Seebeck Coefficient of PEDOT:PSS by Controlling Ion Stoichiometry in Ionic Liquid Additives
Mixing simple additives into poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate)
(PEDOT:PSS) dispersions can greatly enhance the thermoelectric properties
of the cast films with little manufacturing cost, but design rules
for many of these additives have yet to emerge. We show that controlling
stoichiometry in ionic liquid (I.L.) additives can decouple morphological
and electronic modifications to PEDOT:PSS and enhance its power
factor by over 2 orders of magnitude. Blending I.L. additives with
a 1:1 stoichiometry between cationic imidazolium (Im<sup>+</sup>)
derivatives and anionic bis(trifluoromethane)sulfonamide (TFSI<sup>–</sup>) groups into PEDOT:PSS dispersions raised the film
conductivity to ∼1000 S/cm. The Seebeck coefficient, which
gives insight into the electronic structure as well as thermoelectric
performance, remained unchanged. This behavior mimics that of popular
high-boiling solvent additives such as dimethyl sulfoxide and ethylene
glycol, which restructure the film morphology to enhance carrier mobility.
Blending I.L. additives with a 4:1 stoichiometry between Im<sup>+</sup> and TFSI<sup>–</sup> groups raises the conductivity in a
similar manner but also enhances the Seebeck coefficient. This selective
Seebeck enhancement proceeds from the interaction of excess Im<sup>+</sup> with anionic poly(styrenesulfonate) (PSS<sup>–</sup>) groups, similar to previous studies using inorganic salts, that
results in a shift in charge carrier populations. Inorganic salts
by themselves cannot raise the conductivity of PEDOT:PSS to appropriate
values since they lack the solvent restructuring effect. These I.L.
additives combine the effects of high-boiling solvents and diffuse
ions, with the ability to tailor the Seebeck coefficient through ion
stoichiometry