277 research outputs found

    Electrical and Magnetic behaviour of PrFeAsO0.8F0.2 superconductor

    Full text link
    The superconducting and ground state samples of PrFeAsO0.8F0.2 and PrFeAsO have been synthesised via easy and versatile single step solid state reaction route. X-ray & Reitveld refine parameters of the synthesised samples are in good agreement to the earlier reported value of the structure. The ground state of the pristine compound (PrFeAsO) exhibited a metallic like step in resistivity below 150K followed by another step at 12K. The former is associated with the spin density wave (SDW) like ordering of Fe spins and later to the anomalous magnetic ordering for Pr moments. Both the resistivity anomalies are absent in case of superconducting PrFeAsO0.8F0.2 sample. Detailed high field (up to 12Tesla) electrical and magnetization measurements are carried out for superconducting PrFeAsO0.8F0.2 sample. The PrFeAsO0.8F0.2 exhibited superconducting onset (Tconset) at around 47K with Tc({\rho} =0) at 38K. Though the Tconset remains nearly invariant, the Tc({\rho} =0) is decreased with applied field, and the same is around 23K under applied field of 12Tesla. The upper critical field (Hc2) is estimated from the Ginzburg Landau equation (GL) fitting, which is found to be ~ 182Tesla. Critical current density (Jc) being calculated from high field isothermal magnetization (MH) loops with the help of Beans critical state model, is found to be of the order of 103 A/cm2. Summarily, the superconductivity characterization of single step synthesised PrFeAsO0.8F0.2 superconductor is presented.Comment: 15 Pages Text + Fig

    Investigation of structural, magnetic and dielectric properties of gallium substituted Z-type Sr3Co2-xGaxFe24O41 hexaferrites for microwave absorbers

    Get PDF
    Gallium substituted Z-type hexagonal ferrites with chemical composition Sr3Co2-xGaxFe24O41 (x = 0.0,0.4, 0.8, 1.2, 1.6, and 2.0) were successfully synthesised in air at 1200 °C for 5 h using the sol-gel auto-combustion technique, in order to investigate the effect of gallium substitution on structural, magnetic and dielectric properties. X-ray Diffraction (XRD) analysis of all samples reveals the formation of mixed hexaferrite phases, with Z ferrite as the major phase (72–90%).The average crystallite size of heated powders was found to be in the range of 21–40 nm. The saturation magnetisation decreases after gallium substitution, with the lowest values of 64 Am2 kg−1 for composition x = 1.6, which also hasthe highest value of coercivity (28.3 kA m−1). Nevertheless, all were soft ferrites, with Hc between 3.4 and 28.3 kA m−1.The Mr/MS ratio of all samples was found to be less than 0.5, suggesting that all the compositions possess multi-domain microstructures. Mössbauer spectroscopic analysis confirmed that the Fe ions were found in the 3 + high spin state for compositions below x ≤ 0.4, whereas ∼1.5% of the Fe ions were converted into Fe2+ high spin state beyond x ≥ 0.8 compositions, as Ga3+ began to substitute for Fe3+, forming Fe2+ in the cobalt positions. The average hyperfine magnetic field () was found to be decreased with Ga-substitution. Dielectric parameters such as dielectric constant and loss factor were studied as a function of frequency, and their results show normal behaviour for ferrimagnetic materials. In complex measurements at microwave frequencies (8 GHz–12.5 GHz, the X-band), all samples had a real permittivity of around 8–14. For sample x = 2.0, a dielectric resonance peak was observed around 12.15 GHz. All showed a real permeability of around 1.0–1.4 over the frequency of 8 GHz–12.5 GHz range, and ferromagnetic resonance (FMR) was observed in x = 0.0 and 2.0 samples, at around 11 and 12 GHz, respectively. This suggests that the prepared samples can be used as microwave absorbers/EMI shielding at specific microwave frequencies. The co-existence of FMR and dielectric resonance at the same frequency of 12.15 GHz for x = 2.0 could lead to the coupling of these resonances and the development of potential metamaterials

    High Field (14Tesla) Magneto Transport of Sm/PrFeAsO

    Get PDF
    We report high field magneto transport of Sm/PrFeAsO. Below spin density wave transition (TSDW), the magneto-resistance (MR) of Sm/PrFeAsO is positive and increasing with decreasing temperature. The MR of SmFeAsO, is found 16%, whereas the same is 21.5% in case of PrFeAsO, at 2.5 K under applied magnetic field of 14 Tesla (T). In case of SmFeAsO, the variation of isothermal MR with field below 20 K is nonlinear at lower magnetic fields (< 2 Tesla) and the same is linear at moderately higher magnetic fields (H \geq 3.5 T). On the other hand PrFeAsO shows almost linear MR at all temperatures below 20 K. The anomalous behavior of MR being exhibited in PrFeAsO is originated from Dirac cone states. The stronger interplay of Fe and Pr ordered moments is responsible for this distinct behavior. PrFeAsO also shows a hump in resistivity (R-T) with possible conduction band (FeAs) mediated ordering of Pr moments at around 12 K. However the same is absent in SmFeAsO even down to 2 K. Our results of high field magneto-transport of up to 14 Tesla brings about clear distinction between ground states of SmFeAsO and PrFeAsO.Comment: 15 pages Text + Figs ([email protected]

    Sudden cardiac death in patients with ischemic heart failure undergoing coronary artery bypass grafting results from the STICH randomized clinical trial (Surgical Treatment for Ischemic Heart Failure)

    Get PDF
    Background—The risk of sudden cardiac death (SCD) in patients with heart failure following CABG has not been examined in a contemporary clinical trial of surgical revascularization. This analysis describes the incidence, timing and clinical predictors of SCD after CABG. Methods—Patients enrolled in the Surgical Treatment of Ischemic Heart Failure (STICH) trial who underwent CABG with or without surgical ventricular reconstruction (SVR) were included. We excluded patients with prior ICD and those randomized only to medical therapy. The primary outcome was SCD as adjudicated by a blinded committee. A Cox model was used to examine and identify predictors of SCD. The Fine and Gray method was used to estimate the incidence of SCD accounting for the competing risk of other deaths. Results—Over a median follow-up of 46 months, 113 patients of 1411 patients who received CABG without (n = 934) or with SVR (n = 477) had SCD; 311 died of other causes. The mean LVEF at enrollment was 28±9%. The 5-year cumulative incidence of SCD was 8.5%. Patients who had SCD and those who did not die were younger and had fewer comorbid conditions than those who died for reasons other than SCD. In the first 30 days after CABG, SCD (n=5) accounted for 7% of all deaths. The numerically greatest monthly rate of SCD was in the 31-90 day time period. In a multivariable analysis including baseline demographics, risk factors, coronary anatomy and LV function, ESVI and BNP were most strongly associated with SCD. Conclusions—The monthly risk of SCD shortly after CABG among patients with a low LVEF is highest between the first and third month, suggesting that risk stratification for SCD should occur early in the postoperative period, particularly in patients with increased preoperative ESVI and/or BNP

    Magneto-transport and magnetic susceptibility of SmFeAsO1-xFx (x = 0.0 and 0.20)

    Full text link
    Bulk polycrystalline samples, SmFeAsO and the iso-structural superconducting SmFeAsO0.80F0.20 are explored through resistivity with temperature under magnetic field {\rho}(T, H), AC and DC magnetization (M-T), and Specific heat (Cp) measurements. The Resistivity measurement shows superconductivity for x = 0.20 sample with Tc(onset) ~ 51.7K. The upper critical field, [Hc2(0)] is estimated ~3770kOe by Ginzburg-Landau (GL) theory. Broadening of superconducting transition in magneto transport is studied through thermally activated flux flow in applied field up to 130 kOe. The flux flow activation energy (U/kB) is estimated ~1215K for 1kOe field. Magnetic measurements exhibited bulk superconductivity with lower critical field (Hc1) of ~1.2kOe at 2K. In normal state, the paramagnetic nature of compound confirms no trace of magnetic impurity which orders ferromagnetically. AC susceptibility measurements have been carried out for SmFeAsO0.80F0.20 sample at various amplitude and frequencies of applied AC drive field. The inter-granular critical current density (Jc) is estimated. Specific heat [Cp(T)] measurement showed an anomaly at around 140K due to the SDW ordering of Fe, followed by another peak at 5K corresponding to the antiferromagnetic (AFM) ordering of Sm+3 ions in SmFeAsO compound. Interestingly the change in entropy (marked by the Cp transition height) at 5K for Sm+3 AFM ordering is heavily reduced in case of superconducting SmFeAsO0.80F0.20 sample.Comment: 18 pages text + Figs: comments/suggestions welcome ([email protected]

    Genetic determinants of co-accessible chromatin regions in activated T cells across humans.

    Get PDF
    Over 90% of genetic variants associated with complex human traits map to non-coding regions, but little is understood about how they modulate gene regulation in health and disease. One possible mechanism is that genetic variants affect the activity of one or more cis-regulatory elements leading to gene expression variation in specific cell types. To identify such cases, we analyzed ATAC-seq and RNA-seq profiles from stimulated primary CD4+ T cells in up to 105 healthy donors. We found that regions of accessible chromatin (ATAC-peaks) are co-accessible at kilobase and megabase resolution, consistent with the three-dimensional chromatin organization measured by in situ Hi-C in T cells. Fifteen percent of genetic variants located within ATAC-peaks affected the accessibility of the corresponding peak (local-ATAC-QTLs). Local-ATAC-QTLs have the largest effects on co-accessible peaks, are associated with gene expression and are enriched for autoimmune disease variants. Our results provide insights into how natural genetic variants modulate cis-regulatory elements, in isolation or in concert, to influence gene expression

    MMP-9, uPAR and Cathepsin B Silencing Downregulate Integrins in Human Glioma Xenograft Cells In Vitro and In Vivo in Nude Mice

    Get PDF
    Involvement of MMP-9, uPAR and cathepsin B in adhesion, migration, invasion, proliferation, metastasis and tumor growth has been well established. In the present study, MMP-9, uPAR and cathepsin B genes were downregulated in glioma xenograft cells using shRNA plasmid constructs and we evaluated the involvement of integrins and changes in their adhesion, migration and invasive potential.MMP-9, uPAR and cathepsin B single shRNA plasmid constructs were used to downregulate these molecules in xenograft cells. We also used MMP-9/uPAR and MMP-9/cathepsin B bicistronic constructs to evaluate the cumulative effects. MMP-9, uPAR and cathepsin B downregulation significantly inhibits xenograft cell adhesion to several extracellular matrix proteins. Treatment with MMP-9, uPAR and cathepsin B shRNA of xenografts led to the downregulation of several alpha and beta integrins. In all the assays, we noticed more prominent effects with the bicistronic plasmid constructs when compared to the single plasmid shRNA constructs. FACS analysis demonstrated the expression of alphaVbeta3, alpha6beta1 and alpha9beta1 integrins in xenograft cells. Treatment with bicistronic constructs reduced alphaVbeta3, alpha6beta1 and alpha9beta1 integrin expressions in xenograft injected nude mice. Migration and invasion were also inhibited by MMP-9, uPAR and cathepsin B shRNA treatments as assessed by spheroid migration, wound healing, and Matrigel invasion assays. As expected, bicistronic constructs further inhibited the adhesion, migration and invasive potential of the xenograft cells as compared to individual treatments.Downregulation of MMP-9, uPAR and cathespin B alone and in combination inhibits adhesion, migration and invasive potential of glioma xenografts by downregulating integrins and associated signaling molecules. Considering the existence of integrin inhibitor-resistant cancer cells, our study provides a novel and effective approach to inhibiting integrins by downregulating MMP-9, uPAR and cathepsin B in the treatment of glioma

    Pattern Recognition in Pulmonary Tuberculosis Defined by High Content Peptide Microarray Chip Analysis Representing 61 Proteins from M. tuberculosis

    Get PDF
    Background: Serum antibody-based target identification has been used to identify tumor-associated antigens (TAAs) for development of anti-cancer vaccines. A similar approach can be helpful to identify biologically relevant and clinically meaningful targets in M.tuberculosis (MTB) infection for diagnosis or TB vaccine development in clinically well defined populations. Method: We constructed a high-content peptide microarray with 61 M.tuberculosis proteins as linear 15 aa peptide stretches with 12 aa overlaps resulting in 7446 individual peptide epitopes. Antibody profiling was carried with serum from 34 individuals with active pulmonary TB and 35 healthy individuals in order to obtain an unbiased view of the MTB epitope pattern recognition pattern. Quality data extraction was performed, data sets were analyzed for significant differences and patterns predictive of TB+/2. Findings: Three distinct patterns of IgG reactivity were identified: 89/7446 peptides were differentially recognized (in 34/34 TB+ patients and in 35/35 healthy individuals) and are highly predictive of the division into TB+ and TB2, other targets were exclusively recognized in all patients with TB (e.g. sigmaF) but not in any of the healthy individuals, and a third peptide set was recognized exclusively in healthy individuals (35/35) but no in TB+ patients. The segregation between TB+ and TB2 does no

    Understanding the Fodder Markets for Sustainable Development of Livestock Sector in Bihar-A Rapid Appraisal Approach

    Get PDF
    Livestock is an integral part of rural economy in Bihar and fodder is a critical input for livestock development. Data shows that there exist a huge gap between demand and supply of fodder (both dry as well as green). Most part of the south Bihar comprising of agro climatic zones, IIIA and IIIB are fodder surplus because of cultivation of paddy and wheat under assured irrigation facilities. Agro climatic Zone I and Zone II are fodder deficit and mostly depend on fodder surplus regions for their fodder requirement. In order to promote fodder production and requirement it is imperative for the Government to come forward and develop fodder storage facilities at different locations in different regions, so that farmers could store fodder to ensure its availability throughout the year. Due to lack of adequate storage facilities and space producers are forced to dispose the fodder in excess of their marketable surplus and therefore many times marketed surplus exceeds the actual marketable surplus in this way. Institutional support in the form of credit and creation of fodder banks in different fodder producing as well as deficit areas for maintaining buffer stock is essential. Fodder markets are highly unorganized and informal and the role of public sector/govt. in its marketing is virtually negligible. Most of the fodder markets are running on different places do not have any dedicated market place.. Most of the fodder markets are operating along the roadsides and have no legal credentials. This becomes one of the reasons of exploitation of people who are involved in this business. It is envisaged that establishment of dedicated and legal market places would help fodder trade a great deal and also check corrupt practices and exploitations of poor producers and traders. Fodder is a bulky item, which makes its trading cumbersome and handling difficult. Some traders use compressing machines to make fodder blocks. It is important to develop some cost effective and efficient fodder compressing machine for ease of handling and transportation as well as cost saving. Quality control of manufactured compound feed and concentrates is also essential. Most of the traders and consumers feel that there should be a mechanism to ensure quality of manufactured feed and nutritional supplements. Development of technology for cost effective and nutritive feed is requires urgent attention and here Public sector R&D can play an effective role. This can also be done in public-private partnership mode
    corecore