Spacecraft Antennas

Some of the various categories of issues that must be considered in the selection and design of spacecraft antennas for a Personal Access Satellite System (PASS) are addressed, and parametric studies for some of the antenna concepts to help the system designer in making the most appropriate antenna choice with regards to weight, size, and complexity, etc. are provided. The question of appropriate polarization for the spacecraft as well as for the User Terminal Antenna required particular attention and was studied in some depth. Circular polarization seems to be the favored outcome of this study. Another problem that has generally been a complicating factor in designing the multiple beam reflector antennas, is the type of feeds (single vs. multiple element and overlapping vs. non-overlapping clusters) needed for generating the beams. This choice is dependent on certain system design factors, such as the required frequency reuse, acceptable interbeam isolation, antenna efficiency, number of beams scanned, and beam-forming network (BFN) complexity. This issue is partially addressed, but is not completely resolved. Indications are that it may be possible to use relatively simple non-overlapping clusters of only a few elements, unless a large frequency reuse and very stringent isolation levels are required

Fractal FSS: a novel dual band frequency selective surface

The multiband properties of self-similar fractals can be advantageously exploited to design multiband frequency selective surfaces (FSS). A Sierpinski dipole FSS has been analyzed and measured and the results show an interesting dual-band behavior. Furthermore a near-field measurement technique is applied to characterize the FSS response to different angles of incidence. Finally, it is shown that it is possible to tune the FSS response by properly perturbating the geometry of the Sierpinski dipolePeer Reviewe

Radar for Measuring Soil Moisture Under Vegetation

A two-frequency, polarimetric, spaceborne synthetic-aperture radar (SAR) system has been proposed for measuring the moisture content of soil as a function of depth, even in the presence of overlying vegetation. These measurements are needed because data on soil moisture under vegetation canopies are not available now and are necessary for completing mathematical models of global energy and water balance with major implications for global variations in weather and climate

Self-similar prefractal frequency selective surfaces for multiband and dual-polarized applications

Frequency-selective surfaces (FSS) that have been designed using the iterative techniques of fractals have been fabricated and measured. Fractals contain many scales of the starting geometry, each of which acts as a scaled version of the original. A multiband FSS can be designed that uses several iterations of the geometry to form a prefractal that resonates corresponding to each of the scales present in the geometry. Minkowski and Sierpinski Carpet fractals have been utilized in the design of three surfaces which exhibit two or three stopbands depending on how many iterations are used to generate the geometry of the cell. These surfaces are dual polarized due to the symmetry of the geometry. Simulation capabilities have been developed to analyze these periodic structures including periodic method of moments (MOM) and finite- difference time-domain (FDTD) techniques which show good correlation to the measured results.Peer Reviewe

Compact Ku-Band T/R Module for High-Resolution Radar Imaging of Cold Land Processes

Global measurement of terrestrial snow cover is critical to two of the NASA Earth Science focus areas: (1) climate variability and change and (2) water and energy cycle. For radar backscatter measurements, Ku-band frequencies, scattered mainly within the volume of the snowpack, are most suitable for the SWE (snow-water equivalent) measurements. To isolate the complex effects of different snowpack (density and snowgrain size), and underlying soil properties and to distinctly determine SWE, the space-based synthetic aperture radar (SAR) system will require a dual-frequency (13.4 and 17.2 GHz) and dual polarization approach. A transmit/receive (T/R) module was developed operating at Ku-band frequencies to enable the use of active electronic scanning phased-array antenna for wide-swath, high-resolution SAR imaging of terrestrial snow cover. The T/R module has an integrated calibrator, which compensates for all environmental- and time-related changes, and results in very stable power and amplitude characteristics. The module was designed to operate over the full frequency range of 13 to 18 GHz, although only the two frequencies, 13.4 GHz and 17.2 GHz, will be used in this SAR radar application. Each channel of the transmit module produces > 4 W (35 dbm) over the operating bandwidth of 20 MHz. The stability requirements of <0.1 dB receive gain accuracy and <0.1 dB transmit power accuracy over a wide temperature range are achieved using a self-correction scheme, which does real-time amplitude calibration so that the module characteristics are continually corrected. All the calibration circuits are within the T/R module. The timing and calibration sequence is stored in a control FPGA (field-programmable gate array) while an internal 128K 8bit high-speed RAM (random access memory) stores all the calibration values. The module was designed using advanced components and packaging techniques to achieve integration of the electronics in a 2 x6.5x1-in. (5x17x2.5-cm) package. The module size allows 4 T/R modules to feed the 16 16-element subarray on an antenna panel. The T/R module contains four transmit channels and eight receive channels (horizontal and vertical polarizations)

Radar for Monitoring Hurricanes from Geostationary Orbit

A document describes a scanning Doppler radar system to be placed in a geostationary orbit for monitoring the three-dimensional structures of hurricanes, cyclones, and severe storms in general. The system would operate at a frequency of 35 GHz. It would include a large deployable spherical antenna reflector, instead of conventional paraboloidal reflectors, that would allow the reflector to remain stationary while moving the antenna feed(s), and thus, create a set of scanning antenna beams without degradation of performance. The radar would have separate transmitting and receiving antenna feeds moving in spiral scans over an angular excursion of 4 from the boresight axis to providing one radar image per hour of a circular surface area of 5,300-km diameter. The system would utilize a real-time pulse-compression technique to obtain 300-m vertical resolution without sacrificing detection sensitivity and without need for a high-peakpower transmitter. An onboard data-processing subsystem would generate three-dimensional rainfall reflectivity and Doppler observations with 13-km horizontal resolution and line-of-sight Doppler velocity at a precision of 0.3 m/s

Advanced Antennas for Small Satellites

Antenna is one of the key components onboard small satellites as its design determines the performance of all the wireless systems including telemetry, tracking and control, high-speed data downlink, navigation, intersatellite communications, intrasatellite communications, wireless power transfer, radars and sensors, etc. This paper presents a review of recent development in advanced antennas for small satellites (MiniSat, MicroSat, NanoSat, CubeSat, etc.). A number of recent examples of antennas for small satellite applications are shown and discussed. A conclusion and future development in antennas for small satellites are given in the end

Advanced Antennas for Small Satellites

Antenna is one of the key components onboard small satellites as its design determines the performance of all the wireless systems including telemetry, tracking and control, high-speed data downlink, navigation, intersatellite communications, intrasatellite communications, wireless power transfer, radars and sensors, etc. This paper presents a review of recent development in advanced antennas for small satellites (MiniSat, MicroSat, NanoSat, CubeSat, etc.). A number of recent examples of antennas for small satellite applications are shown and discussed. A conclusion and future development in antennas for small satellites are given in the end

Small Triple-Band Meandered PIFA for Brain-Implantable Bio-telemetric Systems : Optimization of Substrate/Superstrate Effectiveness

We optimize and characterize our latest reported small triple-band implantable planar inverted-F antenna (PIFA) resonating at Medical Device Radiocommunication Service (MedRadio) band (401-406 MHz), and Industrial, Scientific, and Medical (ISM) bands (902-928 MHz and 2400-2483.5 MHz) for wireless brain implants. To this end, we used a numerical 7-layer human head model to assess the impact of the substrate and superstrate properties on the peak gain of the antenna. Our results have demonstrated the gain improvements of 2 dB and up to 4.4 dB in the MedRadio and ISM bands, respectively, by optimizing the substrate properties and removing the superstrate.acceptedVersionPeer reviewe