The Last Mile Concept for the Bydgoszcz Logistics Hub

Purpose: The purpose of this article is to discuss the last mile concept for the proposed Bydgoszcz Logistics Hub in the Kujawsko-Pomorskie region, and thus to present the forecast distribution of goods within the last mile from and to the Hub, and to indicate the role that it could play in the region.Method: The development of the last mile concept for the Bydgoszcz Logistics Hub was based on secondary data. The first two stages of work, not discussed in this article, included case studies of 6 successfully operating foreign and domestic transhipment terminals and an analysis of the supply and demand for transport in the Kujawsko-Pomorskie Voivodeship. The third stage, the results of which are presented in this article, involved the identification of the most important national centres generating supply and demand for transport within a radius of 280 km from the Hub. Data, allowing to estimate the potential demand for the fright transport on the analysed routes and their costs depending on the mode of transport, came mainly from the Central Statistical Office, the Railway Transport Office, the General Board of National Roads, the National Bank of Poland and Port of Gdynia and Gdańsk Authorities.Results: The data show that in the period covered by the forecast (2019-2034), the most important change in the transport model of the Hub service area will be a significant increase in inland waterways transport of the Vistula River.Conclusions: The forecast operation of the last mile for the Bydgoszcz Logistics Hub justifies the reloading, storage and forwarding of goods in the area of the Bydgoszcz-Toruń agglomeration. The construction of the Bydgoszcz Logistic Hub will bring improvement to the already existing road links leading to the most important logistic centres, located, on the one hand, in the Tricity seaports, on the other hand, in large economic centres in Poznań, Łódź and Warsaw.Keywords: Baltic Sea Region, combine transport, logistics hub, last milePaper type: Research pape

Third Worldwide Occurrence of Juangodoyite, Na2Cu(CO3)2, and Other Secondary Na, Cu, Mg, and Ca Minerals in the Fore-Sudetic Monocline (Lower Silesia, SW Poland)

Na-Cu carbonates are relatively rare secondary minerals in weathering zones of ore deposits. Hereby we describe mineral composition and crystal chemistry of the most important secondary (Na)Cu minerals and their Na- and Mg-bearing associates forming rich paragenesis in Rudna IX mine. A non-bulky Ca-rich dripstone-like paragenesis from Lubin Główny mine is also characterized, using Powder X-Ray Di raction, Rietveld, and Electron Microprobe methods. Light blue juangodoyite (3rd occurrence worldwide) and darker chalconatronite are the most important members of the Rudna IX paragenesis, being associated with malachite, aragonite (intergrown with hydromagnesite and northupite), and probably cornwallite. Most of the minerals are chemically close to their ideal composition, with minor Mg substitution in malachite. Cu chlorides are mainly represented by clinoatacamite and probably herbertsmithite. Additional, minor phases include trace Cu minerals langite, wroewolfeite, and a lavendulan-group mineral, and monohydrocalcite. Separate halite-rich encrustations are shown to be filled with eriochalcite, ktenasite, and kröhnkite. The most likely to be confirmed coexisting species include paratacamite, wooldridgeite/nesquehonite, johillerite, melanothallite, and kipushite. The Lubin paragenesis mainly comprises aragonite, gypsum, rapidcreekite, and monohydrocalcite, with trace vaterite. Blue colouration is mainly provided by a yet unspecified Ni-, Co-, Mg-, and Mn-bearing Cu-Zn-Ca arsenate mineral close to parnauite

Super-Tonks-Girardeau Quench in the Extended Bose-Hubbard Model

We investigate the effect of a quench from a one-dimensional gas with strong and repulsive local interactions to a strongly attractive one, known as the super-Tonks-Girardeau effect. By incorporating both an optical lattice and non-local interactions, we discover a previously unexplored phenomenon: the disruption of the state during the quench, but within a specific range of interactions. Our study employs the extended Bose-Hubbard model across various system sizes, starting with analytical results for two atoms and progressing to few-body systems using exact diagonalization, DMRG and TDVP methods. Finally, we use a numerical implementation of the local density approximation for a macroscopic number of atoms. Consistently, our findings unveil a region where the initially self-bound structure expands due to the super-Tonks-Girardeau quench. The fast evaporation provides a tool to characterize the phase diagram in state-of-art experiments exploring the physics of the extended Bose-Hubbard model.Comment: Comments welcome

Seasonal changes in chemical and mineralogical composition of sewage sludge incineration residues and their potential for metallic elements and valuable components recovery

The incineration products composition is dependent on the incineration technology, operating conditions and also on the waste feed composition, which can change seasonally, depending on the temporal growth of the population due to tourism, micro-industry seasonality, intensity of atmospheric precipitation and other factors. Seasonal variations in potentially valuable elements concentrations in incineration products are visible but their overall content is low, therefore this material should not be considered as a source of valuable elements. Due to high content of phosphorus (7.5 wt%) only the fly ash can be considered as a potential source of this critical raw material

Impact of Stripe Shape on the Reflectivity of Monolithic High Contrast Gratings

Monolithic high contrast gratings (MHCGs) composed of a one-dimensional grating patterned in a monolithic layer provide up to 100% optical power reflectance and can be fabricated in almost any semiconductor and dielectric material used in modern optoelectronics. MHCGs enable monolithic integration, polarization selectivity, and versatile phase tuning. They can be from 10 to 20 times thinner than distributed Bragg reflectors. The subwavelength dimensions of MHCGs significantly reduce the possibility of ensuring the smoothness of the sidewalls of the MHCG stripes and make precise control of the shape of the MHCG stripe cross-section difficult during the etching process. The question is then whether it is more beneficial to improve the etching methods to obtain a perfect cross-section shape, as assumed by the design, or whether it is possible to find geometrical parameters that enable high optical power reflectance using the shape that a given etching method provides. Here, we present a numerical study supported by the experimental characterization of MHCGs fabricated in various materials using a variety of common surface nanometer-scale shaping methods. We demonstrate that MHCG stripes with an arbitrary cross-section shape can provide optical power reflectance of nearly 100%, which greatly relaxes their fabrication requirements. Moreover, we show that optical power reflectance exceeding 99% with a record spectral bandwidth of more than 20% can be achieved for quasi-Trapezoidal cross-sections of MHCGs. We also show that sidewall corrugations of the MHCG stripes have only a slight impact on MHCG optical power reflectance if the amplitude of the corrugation is less than 16% of the MHCG period. This level of stripe fabrication precision can be achieved using the most current surface etching methods. Our results are significant for the design and production of a variety of photonic devices employing MHCGs. The flexibility with regard to cross-section shape facilitates the reliable fabrication of highly reflective subwavelength grating mirrors. This in turn will enable the manufacture of monolithically integrated high-quality-factor optical micro-and nanocavity devices

EXAMPLES OF MEDICAL SOFTWARE AND HARDWARE EXPERT SYSTEMS FOR DYSFUNCTION ANALYSIS AND TREATMENT

Paper present the recent research in DMCS. The medical and biometric research projects are presented. One of the key element is an image acquisition and processing. The paper presents research of diagnostic application of voice analysis for stroke patients with speech dysfunction, as well as the method for diagnosing and monitoring the effectiveness of medical rehabilitation of patients with dysfunction of the cervical spine. Then the method for sudden cardiac death risk stratification is elaborated

RECENT RESEARCH IN VLSI, MEMS AND POWER DEVICES WITH PRACTICAL APPLICATION TO THE ITER AND DREAM PROJECTS

Several MEMS (Micro Electro-Mechanical Systems) devices have been analysed and simulated. The new proposed model of SiC MPS (Merged PIN-Schottky) diodes is in full agreement with the real MPS devices. The real size DLL (Dynamic Lattice Liquid) simulator as well as the research on modelling and simulation of modern VLSI devices with practical applications have been presented. In the basis of experience in the field of ATCA (Advanced Telecommunications Computing Architecture) based systems a proof-of-concept DAQ (data acquisition) system for ITER (International Thermonuclear Experimental Reactor) have been proposed

A Machine-Learning-Based Approach to Prediction of Biogeographic Ancestry within Europe

Data obtained with the use of massive parallel sequencing (MPS) can be valuable in population genetics studies. In particular, such data harbor the potential for distinguishing samples from different populations, especially from those coming from adjacent populations of common origin. Machine learning (ML) techniques seem to be especially well suited for analyzing large datasets obtained using MPS. The Slavic populations constitute about a third of the population of Europe and inhabit a large area of the continent, while being relatively closely related in population genetics terms. In this proof-of-concept study, various ML techniques were used to classify DNA samples from Slavic and non-Slavic individuals. The primary objective of this study was to empirically evaluate the feasibility of discerning the genetic provenance of individuals of Slavic descent who exhibit genetic similarity, with the overarching goal of categorizing DNA specimens derived from diverse Slavic population representatives. Raw sequencing data were pre-processed, to obtain a 1200 character-long binary vector. A total of three classifiers were used—Random Forest, Support Vector Machine (SVM), and XGBoost. The most-promising results were obtained using SVM with a linear kernel, with 99.9% accuracy and F1-scores of 0.9846–1.000 for all classes

The Mix of Accountancy Policy and Tax Strategy in Company’s Financial Result

The use of legally possible accountancy methods may influence entrepreneurs’ real economic situation as well as their ability to perform in the future. This article presents an introduction to the problems of decision dilemmas in the area of balance law. A future result-oriented approach to the accountancy policy requires devising a method which would help choose an optimal variant among the least risky ones. Since a choice dilemma deals with future and uncertain events, it is necessary to apply statistical analysis with its rules of inference. Because of the changing environment, this issue poses a complex decision problem in conditions of uncertainty. It, therefore, means that the rules of probability theory need to be used in the inference process. With subjective probability it is then possible to calculate the value of expected profits and define the risk of the variants within the discussed accountancy policy