3,538 research outputs found

    Pyroelectric infrared detectors and materials—A critical perspective

    Get PDF
    Pyroelectric infrared detectors (PIRDs) have a number of advantages over other IR sensors, including room-temperature operation, wide wavelength sensitivity, and low cost, leading to their use in many applications and a market expected to reach U.S.$68 million by 2025. Physical models that can be used to accurately predict the performances of PIRDs of different types are reviewed in detail. All polar dielectrics exhibit the pyroelectric effect, so there are many materials potentially available for use in PIRDs. Traditionally, a range of “figures-of-merit” (FoMs) are employed to aid the selection of the best material to use in a given application. These FoMs, and their utility in determining how a given pyroelectric material will behave in a PIRD, are reviewed in the light of the physical models and the availability of dielectric data, which cover the frequency ranges of greatest interest for PIRDs (0.1–100 Hz). The properties of several pyroelectric materials are reviewed, and models are derived for their dielectric properties as functions of frequency. It is concluded, first, that the availability of full-frequency dielectric data is highly desirable if accurate predictions of device performance are to be obtained from the models and that second, the FoMs have practical utility in only very limited circumstances. Thus, they must be used with considerable care and circumspection. The circumstances under which each FoM is likely to give a good prediction for utility are discussed. The properties of some recently researched pyroelectric materials, including lead-containing single crystals in the Pb[(Mg⅓Nb⅔)xTi1−x]O3 system and Na½Bi½TiO3–K½Bi½TiO3 based lead-free crystals and ceramics, are reviewed in the light of this, and their properties and potential for device applications compared with the industry-standard material, LiTaO3. It is concluded that while there is potential for significant device performance improvements by using improved materials, especially with the PMN-PT-based materials, factors such as temperature stability, uniformity, and ease-of-processing are at least as important as device performance in determining material utility. The properties reported for the new lead-free materials do not, as yet, promise a performance likely to compete with LiTaO3 for mm-scale detectors, a material that is both readily available and lead-free

    Itinéraire d’une œuvre

    Get PDF
    Generation of a stable, soluble mimic of the HIV-1 envelope glycoprotein (Env) trimer on the virion surface has been considered an important first step for developing a successful HIV-1 vaccine. Recently, a soluble native-like Env trimer (BG505 SOSIP.664) has been described. This protein has facilitated major advances in the HIV-1 vaccine field, since it was the first Env immunogen that induced consistent neutralizing antibodies against a neutralization-resistant (tier 2) virus. Moreover, BG505 SOSIP.664 enabled elucidation of the atomic resolution structure of the Env trimer and facilitated the isolation and characterization of new broadly neutralizing antibodies against HIV-1. Here, we designed and characterized the BG505 SOSIP.664 trimer fused to fluorescent superfolder GFP (sfGFP), a GFP variant that allows efficient folding (BG505 SOSIP.664-sfGFP). Despite the presence of the sfGFP, the Env protein largely retained its morphology, antigenicity, glycan composition, and thermostability. In addition, we show that BG505 SOSIP.664-sfGFP can be used for fluorescence-based assays, such as flow cytometry.</p

    Balancing the dilution and oddity effects: Decisions depend on body size

    Get PDF
    Background Grouping behaviour, common across the animal kingdom, is known to reduce an individual's risk of predation; particularly through dilution of individual risk and predator confusion (predator inability to single out an individual for attack). Theory predicts greater risk of predation to individuals more conspicuous to predators by difference in appearance from the group (the ‘oddity’ effect). Thus, animals should choose group mates close in appearance to themselves (eg. similar size), whilst also choosing a large group. Methodology and Principal Findings We used the Trinidadian guppy (Poecilia reticulata), a well known model species of group-living freshwater fish, in a series of binary choice trials investigating the outcome of conflict between preferences for large and phenotypically matched groups along a predation risk gradient. We found body-size dependent differences in the resultant social decisions. Large fish preferred shoaling with size-matched individuals, while small fish demonstrated no preference. There was a trend towards reduced preferences for the matched shoal under increased predation risk. Small fish were more active than large fish, moving between shoals more frequently. Activity levels increased as predation risk decreased. We found no effect of unmatched shoal size on preferences or activity. Conclusions and Significance Our results suggest that predation risk and individual body size act together to influence shoaling decisions. Oddity was more important for large than small fish, reducing in importance at higher predation risks. Dilution was potentially of limited importance at these shoal sizes. Activity levels may relate to how much sampling of each shoal was needed by the test fish during decision making. Predation pressure may select for better decision makers to survive to larger size, or that older, larger fish have learned to make shoaling decisions more efficiently, and this, combined with their size relative to shoal-mates, and attractiveness as prey items influences shoaling decisions

    Comparison between Suitable Priors for Additive Bayesian Networks

    Full text link
    Additive Bayesian networks are types of graphical models that extend the usual Bayesian generalized linear model to multiple dependent variables through the factorisation of the joint probability distribution of the underlying variables. When fitting an ABN model, the choice of the prior of the parameters is of crucial importance. If an inadequate prior - like a too weakly informative one - is used, data separation and data sparsity lead to issues in the model selection process. In this work a simulation study between two weakly and a strongly informative priors is presented. As weakly informative prior we use a zero mean Gaussian prior with a large variance, currently implemented in the R-package abn. The second prior belongs to the Student's t-distribution, specifically designed for logistic regressions and, finally, the strongly informative prior is again Gaussian with mean equal to true parameter value and a small variance. We compare the impact of these priors on the accuracy of the learned additive Bayesian network in function of different parameters. We create a simulation study to illustrate Lindley's paradox based on the prior choice. We then conclude by highlighting the good performance of the informative Student's t-prior and the limited impact of the Lindley's paradox. Finally, suggestions for further developments are provided.Comment: 8 pages, 4 figure

    Antimalarial 4(1H)-pyridones bind to the Qisite of cytochromebc1

    Get PDF
    Cytochrome bc1 is a proven drug target in the prevention and treatment of malaria. The rise in drug-resistant strains of Plasmodium falciparum, the organism responsible for malaria, has generated a global effort in designing new classes of drugs. Much of the design/redesign work on overcoming this resistance has been focused on compounds that are presumed to bind the Qo site (one of two potential binding sites within cytochrome bc1) using the known crystal structure of this large membrane-bound macromolecular complex via in silico modeling. Cocrystallization of the cytochrome bc1 complex with the 4(1H)-pyridone class of inhibitors, GSK932121 and GW844520, that have been shown to be potent antimalarial agents in vivo, revealed that these inhibitors do not bind at the Qo site but bind at the Qi site. The discovery that these compounds bind at the Qi site may provide a molecular explanation for the cardiotoxicity and eventual failure of GSK932121 in phase-1 clinical trial and highlight the need for direct experimental observation of a compound bound to a target site before chemical optimization and development for clinical trials. The binding of the 4(1H)-pyridone class of inhibitors to Qi also explains the ability of this class to overcome parasite Qo-based atovaquone resistance and provides critical structural information for future design of new selective compounds with improved safety profiles

    Urinary biomarker concentrations of captan, chlormequat, chlorpyrifos and cypermethrin in UK adults and children living near agricultural land

    Get PDF
    There is limited information on the exposure to pesticides experienced by UK residents living near agricultural land. This study aimed to investigate their pesticide exposure in relation to spray events. Farmers treating crops with captan, chlormequat, chlorpyrifos or cypermethrin provided spray event information. Adults and children residing ≤100 m from sprayed fields provided first-morning void urine samples during and outwith the spray season. Selected samples (1–2 days after a spray event and at other times (background samples)) were analysed and creatinine adjusted. Generalised Linear Mixed Models were used to investigate if urinary biomarkers of these pesticides were elevated after spray events. The final data set for statistical analysis contained 1518 urine samples from 140 participants, consisting of 523 spray event and 995 background samples which were analysed for pesticide urinary biomarkers. For captan and cypermethrin, the proportion of values below the limit of detection was greater than 80%, with no difference between spray event and background samples. For chlormequat and chlorpyrifos, the geometric mean urinary biomarker concentrations following spray events were 15.4 μg/g creatinine and 2.5 μg/g creatinine, respectively, compared with 16.5 μg/g creatinine and 3.0 μg/g creatinine for background samples within the spraying season. Outwith the spraying season, concentrations for chlorpyrifos were the same as those within spraying season backgrounds, but for chlormequat, lower concentrations were observed outwith the spraying season (12.3 μg/g creatinine). Overall, we observed no evidence indicative of additional urinary pesticide biomarker excretion as a result of spray events, suggesting that sources other than local spraying are responsible for the relatively low urinary pesticide biomarkers detected in the study population

    Control over phase separation and nucleation using a laser-tweezing potential

    Get PDF
    Control over the nucleation of new phases is highly desirable but elusive. Even though there is a long history of crystallization engineering by varying physicochemical parameters, controlling which polymorph crystallizes or whether a molecule crystallizes or forms an amorphous precipitate is still a poorly understood practice. Although there are now numerous examples of control using laser-induced nucleation, the absence of physical understanding is preventing progress. Here we show that the proximity of a liquid–liquid critical point or the corresponding binodal line can be used by a laser-tweezing potential to induce concentration gradients. A simple theoretical model shows that the stored electromagnetic energy of the laser beam produces a free-energy potential that forces phase separation or triggers the nucleation of a new phase. Experiments in a liquid mixture using a low-power laser diode confirm the effect. Phase separation and nucleation using a laser-tweezing potential explains the physics behind non-photochemical laser-induced nucleation and suggests new ways of manipulating matter

    HIV non-B subtype distribution: emerging trends and risk factors for imported and local infections newly diagnosed in South Australia

    Get PDF
    Monitoring HIV subtype distribution is important for understanding transmission dynamics. Subtype B has historically been dominant in Australia, but in recent years new clades have appeared. Since 2000, clade data have been collected as part of HIV surveillance in South Australia. The aim of this study was to evaluate the prevalence of and risk factors for HIV-1 non-B subtypes. The study population was composed of newly diagnosed, genotyped HIV subjects in South Australia between 2000 and 2010. We analyzed time trends and subtype patterns in this cohort; notification data were aggregated into three time periods (2000–2003, 2004–2006, and 2007–2010). Main outcome measures were number of new non-B infections by year, exposure route, and other demographic characteristics. There were 513 new HIV diagnoses; 425 had information on subtype. The majority (262/425) were in men who have sex with men (MSM), predominantly subtype B and acquired in Australia. Infections acquired in Australia decreased from 77% (2000–2003) to 64% (2007–2010) ( p = 0.007) and correspondingly the proportion of subtype B declined from 85% to 68% ( p = 0.002). Non-B infections were predominantly (83%) heterosexual contacts, mostly acquired overseas (74%). The majority (68%) of non-B patients were born outside of Australia. There was a non-significant increase from 1.6% to 4.2% in the proportion of locally transmitted non-B cases (p = 0.3). Three non-B subtypes and two circulating recombinant forms (CRFs) were identified: CRF_AE (n = 41), C (n = 36), CRF_AG (n = 13), A (n = 9), and D (n = 2). There has been a substantial increase over the past decade in diagnosed non-B infections, primarily through cases acquired overseas

    Autologous neutralizing antibody responses to an HIV envelope glycan hole are not easily broadened in rabbits

    Get PDF
    Extensive studies with subtype A BG505-derived HIV Env immunogens have revealed that the dominant autologous neutralizing epitope in rabbits is located in an exposed region of the heavily glycosylated trimer that lacks potential N-linked glycosylation sites at positions 230, 241, and 289. The Env derived from B41, a subtype B virus, shares a glycan hole centered on positions 230 and 289. To test whether broader neutralization to the common glycan hole can be achieved, we immunized rabbits with B41 SOSIP alone, as well as B41 and BG505 co-immunization. We isolated autologous neutralizing antibodies (nAbs) and described their structure in complex with the B41 Env. Our data suggest that distinct autologous nAb lineages are induced by BG505 and B41 immunogens, even when both were administered together. In contrast to previously described BG505 glycan hole antibodies, the B41-specific nAbs accommodate the >97% conserved N241 glycan, which is present in B41. Single particle cryo-electron microscopy studies confirmed that B41 and BG505-specific nAbs bind to overlapping glycan hole epitopes. We then used our high-resolution data to guide mutations in the BG505 glycan hole epitope in an attempt to broaden the reactivity of a B41-specific nAb, but only recovered partial binding. Our data demonstrate that lack of cross-reactivity in glycan hole antibodies is due to amino acid differences within the epitope and our attempts to rationally design cross-reactive trimers resulted in only limited success. Thus, even for the immunodominant glycan hole shared between BG505 and B41 the prospect of designing prime-boost immunogens remains difficult
    corecore