2,147 research outputs found
Tumor bed brachytherapy for locally advanced laryngeal cancer: a feasibility assessment of combination with ferromagnetic hyperthermia
Purpose. To assess the feasibility of adding hyperthermia to an original method of organ-preserving brachytherapy treatment for locally advanced head and neck tumors. Methods and materials. The method involves organ-preserving tumor resection and adjunctive high-dose-rate (HDR) brachytherapy delivered via afterloading catheters. These catheters are embedded in a polymeric implant prepared intraoperatively to fill the resection cavity, allowing precise computer planning of dose distribution in the surrounding at-risk tumor bed tissue. Theoretical and experimental analyzes address the feasibility of heating the tumor bed implant by coupling energy from a 100 kHz magnetic field applied externally into ferromagnetic particles, which are uniformly distributed within the implant. The goal is to combine adjuvant hyperthermia (40 °C–45 °C) to at-risk tissue within 5 mm of the resection cavity for thermal enhancement of radiation and chemotherapy response. Results. A five-year relapse free survival rate of 95.8% was obtained for a select group of 48 male patients with T3N0M0 larynx tumors, when combining organ-preserving surgery with HDR brachytherapy from a tumor bed implant. Anticipating the need for additional treatment in patients with more advanced disease, a theoretical analysis demonstrates the ability to heat at-risk tissue up to 10 mm from the surface of an implant filled with magnetically coupled ferromagnetic balls. Using a laboratory induction heating system, it takes just over 2 min to increase the target tissue temperature by 10 °C using a 19% volume fraction of ferromagnetic spheres in a 2 cm diameter silicone implant. Conclusion. The promising clinical results of a 48 patient pilot study demonstrate the feasibility of a new organ sparing treatment for laryngeal cancer. Anticipating the need for additional therapy, theoretical estimations of potential implant heating are confirmed with laboratory experiments, preparing the way for future implementation of a thermobrachytherapy implant approach for organ-sparing treatment of locally advanced laryngeal cancer
Incidence and diversity of the fungal genera Aspergillus and Penicillium in Portuguese almonds and chestnuts
Almonds (Prunus dulcis (Miller) D.A. Webb) and European (sweet) chestnuts (Castanea sativa Miller) are of great economic and social impact in Mediterranean countries, and in some areas they constitute the main income of rural populations. Despite all efforts to control fungal contamination, toxigenic fungi are ubiquitous in nature and occur regularly in worldwide food supplies, and these nuts are no exception. This work aimed to provide knowledge on the general mycobiota of Portuguese almonds and chestnuts, and its evolution from field to the end of storage. For this matter, 45 field chestnut samples and 36 almond samples (30 field samples and six storage samples) were collected in Trás-os-Montes, Portugal. All fungi belonging to genus Aspergillus were isolated and identified to the section level. Fungi representative of other genera were identified to the genus level. In the field, chestnuts were mainly contaminated with the genera Fusarium, Cladosporium, Alternaria and Penicillium, and the genus Aspergillus was only rarely found, whereas almonds were more contaminated with Aspergillus. In almonds, Aspergillus incidence increased significantly from field to the end of storage, but diversity decreased, with potentially toxigenic isolates belonging to sections Flavi and Nigri becoming more significant and widespread throughout storage. These fungi were determined to be moderately associated, which can be indicative of mycotoxin co-contamination problems if adequate storage conditions are not secured.P. Rodrigues was supported by grants SFRH/BD/28332/2006 from Fundacao para a Ciencia e a Tecnologia (FCT), and SFRH/PROTEC/49555/2009 from FCT and Polytechnic Institute of Braganca, Portugal
Isolation of Uncultured Bacteria from Antarctica Using Long Incubation Periods and Low Nutritional Media
Uncultured microorganisms comprise most of the microbial diversity existing on our planet. Despite advances in environmental sequencing and single-cell genomics, in-depth studies about bacterial metabolism and screening of novel bioproducts can only be assessed by culturing microbes in the laboratory. Here we report uncultured, or recalcitrant, microorganisms from an Antarctic soil sample, using relatively simple methods: oligotrophic media, extended incubation periods, observation under stereo microscopy, and selection of slow-growing bacteria. We managed to isolate several rare microorganisms belonging to infrequently isolated or recently described genera, for example Lapillicoccus, Flavitalea, Quadrisphaera, Motilibacter, and Polymorphobacter. Additionally, we obtained isolates presenting 16S rRNA sequence similarity ranging from 92.08 to 94.46% with any other known cultured species, including two distinct isolates from the class Thermoleophilia, that although common in Antarctic soils (as identified by metagenomics), was never reported to be isolated from such samples. Our data indicates that simple methods are still useful for cultivating recalcitrant microorganisms, even when dealing with samples from extreme environments
Cultural Phylogenetics of the Tupi Language Family in Lowland South America
Background: Recent advances in automated assessment of basic vocabulary lists allow the construction of linguistic phylogenies useful for tracing dynamics of human population expansions, reconstructing ancestral cultures, and modeling transition rates of cultural traits over time. Methods: Here we investigate the Tupi expansion, a widely-dispersed language family in lowland South America, with a distance-based phylogeny based on 40-word vocabulary lists from 48 languages. We coded 11 cultural traits across the diverse Tupi family including traditional warfare patterns, post-marital residence, corporate structure, community size, paternity beliefs, sibling terminology, presence of canoes, tattooing, shamanism, men’s houses, and lip plugs. Results/Discussion: The linguistic phylogeny supports a Tupi homeland in west-central Brazil with subsequent major expansions across much of lowland South America. Consistently, ancestral reconstructions of cultural traits over the linguistic phylogeny suggest that social complexity has tended to decline through time, most notably in the independent emergence of several nomadic hunter-gatherer societies. Estimated rates of cultural change across the Tupi expansion are on the order of only a few changes per 10,000 years, in accord with previous cultural phylogenetic results in other languag
Protein-protein modelling using cryo-EM restraints
The recent improvements in cryo-electron microscopy (cryo-EM) in the past few
years are now allowing to observe molecular complexes at atomic resolution. As
a consequence, numerous structures derived from cryo-EM are now available in
the Protein Data Bank. However, if for some complexes atomic resolution is
reached, this is not true for all. This is also the case in cryo-electron
tomography where the achievable resolution is still limited. Furthermore the
resolution in a cryo-EM map is not a constant, with often outer regions being
of lower resolution, possibly linked to conformational variability. Although
those low to medium resolution EM maps (or regions thereof) cannot directly
provide atomic structure of large molecular complexes, they provide valuable
information to model the individual components and their assembly into them.
Most approaches for this kind of modelling are performing rigid fitting of the
individual components into the EM density map. While this would appear an
obvious option, they ignore key aspects of molecular recognition, the
energetics and flexibility of the interfaces. Moreover, these often restricts
the modelling to a unique source of data, the EM density map. In this chapter,
we describe a protocol where an EM map is used as restraint in HADDOCK to guide
the modelling process.Comment: 28 pages including 7 figure
Electric Field-Tuned Topological Phase Transition in Ultra-Thin Na3Bi - Towards a Topological Transistor
The electric field induced quantum phase transition from topological to
conventional insulator has been proposed as the basis of a topological field
effect transistor [1-4]. In this scheme an electric field can switch 'on' the
ballistic flow of charge and spin along dissipationless edges of the
two-dimensional (2D) quantum spin Hall insulator [5-9], and when 'off' is a
conventional insulator with no conductive channels. Such as topological
transistor is promising for low-energy logic circuits [4], which would
necessitate electric field-switched materials with conventional and topological
bandgaps much greater than room temperature, significantly greater than
proposed to date [6-8]. Topological Dirac semimetals(TDS) are promising systems
in which to look for topological field-effect switching, as they lie at the
boundary between conventional and topological phases [3,10-16]. Here we use
scanning probe microscopy/spectroscopy (STM/STS) and angle-resolved
photoelectron spectroscopy (ARPES) to show that mono- and bilayer films of TDS
Na3Bi [3,17] are 2D topological insulators with bulk bandgaps >400 meV in the
absence of electric field. Upon application of electric field by doping with
potassium or by close approach of the STM tip, the bandgap can be completely
closed then re-opened with conventional gap greater than 100 meV. The large
bandgaps in both the conventional and quantum spin Hall phases, much greater
than the thermal energy kT = 25 meV at room temperature, suggest that ultrathin
Na3Bi is suitable for room temperature topological transistor operation
Generation of Functional CLL-Specific Cord Blood CTL Using CD40-Ligated CLL APC
PMCID: PMC3526610This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
Determinants on an efficient cellulase recycling process for the production of bioethanol from recycled paper sludge under high solid loadings
Background: In spite of the continuous efforts and investments in the last decades, lignocellulosic ethanol is still not economically competitive with fossil fuels. Optimization is still required in different parts of the process. Namely, the cost effective usage of enzymes has been pursued by different strategies, one of them being recycling.
Results: Cellulase recycling was analyzed on Recycled Paper Sludge (RPS) conversion into bioethanol under intensified conditions. Different cocktails were studied regarding thermostability, hydrolysis efficiency, distribution in the multiphasic system and recovery from solid. Celluclast showed inferior stability at higher temperatures (45-55 ºC), nevertheless its performance at moderate temperatures (40ºC) was slightly superior to other cocktails (ACCELLERASE®1500 and Cellic®CTec2). Celluclast distribution in the solid-liquid medium was also more favorable, enabling to recover 88 % of final activity at the end of the process.
A Central Composite Design studied the influence of solids concentration and enzyme dosage on RPS conversion by Celluclast. Solids concentration showed a significant positive effect on glucose production, no major limitations being found from utilizing high amounts of solids under the studied conditions. Increasing enzyme loading from 20 to 30 FPU/ gcellulose had no significant effect on sugars production, suggesting that 22 % solids and 20 FPU/gcellulose are the best operational conditions towards an intensified process. Applying these, a system of multiple rounds of hydrolysis with enzyme recycling was implemented, allowing to maintain steady levels of enzyme activity with only 50 % of enzyme on each recycling stage. Additionally, interesting levels of solid conversion (70-81 %) were also achieved, leading to considerable improvements on glucose and ethanol production comparatively with the reports available so far (3.4 and 3.8 fold, respectively).
Conclusions: Enzyme recycling viability depends on enzyme distribution between the solid and liquid phases at the end of hydrolysis, as well as enzymes thermostability. Both are critical features to be observed for a judicious choice of enzyme cocktail. This work demonstrates that enzyme recycling in intensified biomass degradation can be achieved through simple means. The process is possibly much more effective at larger scale, hence novel enzyme formulations favoring this possibility should be developed for industrial usage.This work had the fnancial support of the Portuguese Foundation for Science
and Technology (FCT) under the scope of the strategic funding of UID/
BIO/04469/2013 unit, COMPETE 2020 (POCI-01-0145-FEDER-006684) and the
MultiBiorefnery project (POCI-01-0145-FEDER-016403). Furthermore, FCT
equally supported the Ph.D. grant to DG (SFRH/BD/88623/2012).info:eu-repo/semantics/publishedVersio
A new age to an old site: the earliest Tupiguarani settlement in Rio de Janeiro State?
Left ventricular free wall impeding rupture in post-myocardial infarction period diagnosed by myocardial contrast echocardiography: Case report
BACKGROUND: Left ventricular free wall rupture occurs in up to 10% of the in-hospital deaths following myocardial infarction. It is mainly associated with posterolateral myocardial infarction and its antemortem diagnosis is rarely made. Contrast echocardiography has been increasingly used for the evaluation of myocardial perfusion in patients with acute myocardial infarction, with important prognostic implications. In this case, we reported its use for the detection of a mechanical complication following myocardial infarction. CASE PRESENTATION: A 50-year-old man with acute myocardial infarction in the lateral wall underwent myocardial contrast echocardiography for the evaluation of myocardial perfusion in the third day post-infarction. A perfusion defect was detected in lateral and inferior walls as well as the presence of contrast extrusion from the left ventricular cavity into the myocardium, forming a serpiginous duct extending from the endocardium to the epicardial region of the lateral wall, without communication with the pericardial space. Magnetic resonance imaging confirmed the diagnosis of impending rupture of the left ventricular free wall. While waiting for cardiac surgery, patient presented with cardiogenic shock and died. Anatomopathological findings were consistent with acute myocardial infarction in the lateral wall and a left ventricular free wall rupture at the infarct site. CONCLUSION: This case illustrates the early diagnosis of left ventricular free wall rupture by contrast echocardiography. Due to its ability to be performed at bedside this modality of imaging has the potential to identify this catastrophic condition in patients with acute myocardial infarction and help to treat these patients with emergent surgery
- …