Inversion of exciton level splitting in quantum dots

The demonstration of degeneracy of exciton spin states is an important step toward the production of entangled photon pairs from the biexciton cascade. We measure the fine structure of exciton and biexciton states for a large number of single InAs quantum dots in a GaAs matrix; the energetic splitting of the horizontally and vertically polarized components of the exciton doublet is shown to decrease as the exciton confinement decreases, crucially passing through zero and changing sign. Thermal annealing is shown to reduce the exciton confinement, thereby increasing the number of dots with splitting close to zero

Controlling the polarisation correlation of photon pairs from a charge-tuneable quantum dot

Correlation between the rectilinear polarisations of the photons emitted from the biexciton decay in a single quantum dot is investigated in a device which allows the charge-state of the dot to be controlled. Optimising emission from the neutral exciton states maximises the operating efficiency of the biexciton decay. This is important for single dot applications such as a triggered source of entangled photons. As the bias on the device is reduced correlation between the two photons is found to fall dramatically as emission from the negatively charged exciton becomes significant. Lifetime measurements demonstrate that electronic spin-scattering is the likely cause.Comment: 3 figure

Day 1. Posters – Sport and Performance

Background: Exercise tests are one of the most commonly used tools within sports science research. Therefore, the reliability of such exercise tests is of critical importance when investigating the efficacy of nutritional, physiological, psychological or training interventions. Purpose: The aim of this experiment was to measure the reliability of a 20 km cycling time trial performance test when performed by mounting the cyclists own bicycle frame on an electronic turbo trainer. Methods: Twenty one male cyclists (age 35 ± 8 y, height 1.82 ± 0.05 m, body mass 80.7 ± 9.0 kg) completed the 20 km time trial on three separate occasions; the initial visit was a habituation trial and was followed by two main trials. All laboratory visits were conducted at the same time of day, following a 24h diet and activity standardisation period, and at least 2 h postprandial. The time trial was completed on a Cyclus2 (RBM Electronic, Germany) ergometer. The cyclists mounted their own bike frames on to the ergometer and the settings on the Cyclus2 were adjusted for each individual bike, ensuring an accurate measurement of distance and performance. During the exercise trial, participants were deprived of any performance information other than distance covered and gear selection; no encouragement was provided by experimenters. Results: There was no order effect of the trials, inclusive of the habituation trial (p = 0.901). There was no significant difference in the time taken to complete the 20 km between trials 1 and 2 (trial 1: 1969 ± 112 s; trial 2: 1975 ± 119 s; p = 0.222). The intra-class correlation between trial 1 and 2 was r = 0.99, with the coefficient of variation being 0.7%. Conclusions: The use of a 20 km cycling time trial, in which the cyclists bicycle frame is mounted on a cycle ergometer, is highly reproducible. Such a test can, therefore, be reliably used to detect changes in performance due to various interventions

Influence of third-body particles originating from bone void fillers on the wear of ultra-high-molecular-weight polyethylene

Calcium sulfate bone void fillers are increasingly being used for dead space management in infected arthroplasty revision surgery. The presence of these materials as loose beads close to the bearing surfaces of joint replacements gives the potential for them to enter the joint becoming trapped between the articulating surfaces; the resulting damage to cobalt chrome counterfaces and the subsequent wear of ultra-high-molecular-weight polyethylene is unknown. In this study, third-body damage to cobalt chrome counterfaces was simulated using particles of the calcium sulfate bone void fillers Stimulan® (Biocomposites Ltd., Keele, UK) and Osteoset® (Wright Medical Technology, TN, USA) using a bespoke rig. Scratches on the cobalt chrome plates were quantified in terms of their density and mean lip height, and the damage caused by the bone void fillers was compared to that caused by particles of SmartSet GMV PMMA bone cement (DePuy Synthes, IN, USA). The surface damage from Stimulan® was below the resolution of the analysis technique used; SmartSet GMV caused 0.19 scratches/mm with a mean lip height of 0.03 µm; Osteoset® led to a significantly higher number (1.62 scratches/mm) of scratches with a higher mean lip height (0.04 µm). Wear tests of ultra-high-molecular-weight polyethylene were carried out in a six-station multi-axial pin on plate reciprocating rig against the damaged plates and compared to negative (highly polished) and positive control plates damaged with a diamond stylus (2 µm lip height). The wear of ultra-high-molecular-weight polyethylene was shown to be similar against the negative control plates and those damaged with third-body particles; there was a significantly higher (p < 0.001) rate of ultra-high-molecular-weight polyethylene wear against the positive control plates. This study showed that bone void fillers of similar composition can cause varying damage to cobalt chrome counterfaces. However, the lip heights of the scratches were not of sufficient magnitude to increase the wear of ultra-high-molecular-weight polyethylene above that of the negative controls

The lumbar spine has an intrinsic shape specific to each individual that remains a characteristic throughout flexion and extension.

The final publication is available at Springer via http://dx.doi.org/10.1007/s00586-013-3162-1PURPOSE: We have previously shown that the lumbar spine has an intrinsic shape specific to the individual and characteristic of sitting, standing and supine postures. The purpose of this study was to test the hypothesis that this intrinsic shape is detectable throughout a range of postures from extension to full flexion in healthy adults. METHODS: Sagittal images of the lumbar spine were taken using a positional MRI with participants (n = 30) adopting six postures: seated extension, neutral standing, standing with 30, 45 and 60° and full flexion. Active shape modelling (ASM) was used to identify and quantify 'modes' of variation in the shape of the lumbar spine. RESULTS: ASM showed that 89.5% of the variation in the shape of the spine could be explained by the first two modes; describing the overall curvature and the distribution of curvature of the spine. Mode scores were significantly correlated between all six postures (modes 1-9, r = 0.4-0.97, P < 0.05), showing that an element of intrinsic shape was maintained when changing postures. The spine was most even in seated extension (P < 0.001) and most uneven between 35 and 45° flexion (P < 0.05). CONCLUSIONS: This study shows that an individual's intrinsic lumbar spine shape is quantifiable and detectable throughout lumbar flexion and extension. These findings will enable the role of lumbar curvature in injury and low back pain to be assessed in the clinic and in the working and recreational environments.AVP is supported by a PhD studentship kindly donated by Roemex Ltd. to the Aberdeen Centre of the Oliver Bird Rheumatism Programme at the Nuffield Foundation

Cognitive architectures as Lakatosian research programmes: two case studies

Cognitive architectures - task-general theories of the structure and function of the complete cognitive system - are sometimes argued to be more akin to frameworks or belief systems than scientific theories. The argument stems from the apparent non-falsifiability of existing cognitive architectures. Newell was aware of this criticism and argued that architectures should be viewed not as theories subject to Popperian falsification, but rather as Lakatosian research programs based on cumulative growth. Newell's argument is undermined because he failed to demonstrate that the development of Soar, his own candidate architecture, adhered to Lakatosian principles. This paper presents detailed case studies of the development of two cognitive architectures, Soar and ACT-R, from a Lakatosian perspective. It is demonstrated that both are broadly Lakatosian, but that in both cases there have been theoretical progressions that, according to Lakatosian criteria, are pseudo-scientific. Thus, Newell's defense of Soar as a scientific rather than pseudo-scientific theory is not supported in practice. The ACT series of architectures has fewer pseudo-scientific progressions than Soar, but it too is vulnerable to accusations of pseudo-science. From this analysis, it is argued that successive versions of theories of the human cognitive architecture must explicitly address five questions to maintain scientific credibility

Sign-reversal of the in-plane resistivity anisotropy in hole-doped iron pnictides

The in-plane anisotropy of the electrical resistivity across the coupled orthorhombic and magnetic transitions of the iron pnictides has been extensively studied in the parent and electron-doped compounds. All these studies universally show that the resistivity $\rho_{a}$ across the long orthorhombic axis $a_{O}$ - along which the spins couple antiferromagnetically below the magnetic transition temperature - is smaller than the resistivity $\rho_{b}$ of the short orthorhombic axis $b_{O}$, i. e. $\rho_{a}<\rho_{b}$. Here we report that in the hole-doped compounds Ba$_{1-x}$K$_{x}$Fe$_{2}$As$_{2}$, as the doping level increases, the resistivity anisotropy initially becomes vanishingly small, and eventually changes sign for sufficiently large doping, i. e. $\rho_{b}<\rho_{a}$. This observation is in agreement with a recent theoretical prediction that considers the anisotropic scattering of electrons by spin-fluctuations in the orthorhombic/nematic state.Comment: This paper has been replaced by the new version offering new explanation of the experimental results first reported her

Structure and function of the type III pullulan hydrolase from Thermococcus kodakarensis

Pullulan-hydrolysing enzymes, more commonly known as debranching enzymes for starch and other polysaccharides, are of great interest and have been widely used in the starch-saccharification industry. Type III pullulan hydrolase from Thermococcus kodakarensis (TK-PUL) possesses both pullulanase and α-amylase activities. Until now, only two enzymes in this class, which are capable of hydrolysing both α-1,4- and α-1,6-glycosidic bonds in pullulan to produce a mixture of maltose, panose and maltotriose, have been described. TK-PUL shows highest activity in the temperature range 95–100°C and has a pH optimum in the range 3.5–4.2. Its unique ability to hydrolyse maltotriose into maltose and glucose has not been reported for other homologous enzymes. The crystal structure of TK-PUL has been determined at a resolution of 2.8 Å and represents the first analysis of a type III pullulan hydrolyse. The structure reveals that the last part of the N-terminal domain and the C-terminal domain are significantly different from homologous structures. In addition, the loop regions at the active-site end of the central catalytic domain are quite different. The enzyme has a well defined calcium-binding site and possesses a rare vicinal disulfide bridge. The thermostability of TK-PUL and its homologues may be attributable to several factors, including the increased content of salt bridges, helical segments, Pro, Arg and Tyr residues and the decreased content of serine

Efficient Numerical Schemes for Computing Cardiac Electrical Activation over Realistic Purkinje Networks: Method and Verification

We present a numerical solver for the fast conduction system in the heart using both a CPU and a hybrid CPU/GPU implementation. To verify both implementations, we construct analytical solutions and show that the L2-error is similar in both implementations and decreases linearly with the spatial step size. Finally, we test the performance of the implementations with networks of varying complexity, where the hybrid implementation is, on average, 5.8 times faster