385 research outputs found

    Optical quality assurance of GEM foils

    Full text link
    An analysis software was developed for the high aspect ratio optical scanning system in the Detec- tor Laboratory of the University of Helsinki and the Helsinki Institute of Physics. The system is used e.g. in the quality assurance of the GEM-TPC detectors being developed for the beam diagnostics system of the SuperFRS at future FAIR facility. The software was tested by analyzing five CERN standard GEM foils scanned with the optical scanning system. The measurement uncertainty of the diameter of the GEM holes and the pitch of the hole pattern was found to be 0.5 {\mu}m and 0.3 {\mu}m, respectively. The software design and the performance are discussed. The correlation between the GEM hole size distribution and the corresponding gain variation was studied by comparing them against a detailed gain mapping of a foil and a set of six lower precision control measurements. It can be seen that a qualitative estimation of the behavior of the local variation in gain across the GEM foil can be made based on the measured sizes of the outer and inner holes.Comment: 12 pages, 29 figure

    When fecundity does not equal fitness: evidence of an offspring quantity versus quality trade-off in pre-industrial humans

    Get PDF
    Maternal fitness should be maximized by the optimal division of reproductive investment between offspring number and offspring quality. While evidence for this is abundant in many taxa, there have been fewer tests in mammals, and in particular, humans. We used a dataset of humans spanning three generations from pre-industrial Finland to test how increases in maternal fecundity affect offspring quality and maternal fitness in contrasting socio-economic conditions. For ‘resource-poor’ landless families, but not ‘resource-rich’ landowning families, maternal fitness returns diminished with increased maternal fecundity. This was because the average offspring contribution to maternal fitness declined with increased maternal fecundity for landless but not landowning families. This decline was due to reduced offspring recruitment with increased maternal fecundity. However, in landowning families, recruited offspring fecundity increased with increased maternal fecundity. This suggests that despite decreased offspring recruitment, maternal fitness is not reduced in favourable socio-economic conditions due to an increase in subsequent offspring fecundity. These results provide evidence consistent with an offspring quantity–quality trade-off in the lifetime reproduction of humans from poor socio-economic conditions. The results also highlight the importance of measuring offspring quality across their whole lifespan to estimate reliably the fitness consequences of increased maternal fecundity

    Dual Specificity Phosphatase 1 Regulates Human Inducible Nitric Oxide Synthase Expression by p38 MAP Kinase

    Get PDF
    The role of dual specificity phosphatase 1 (DUSP1) in inducible nitric oxide synthase (iNOS) expression in A549 human pulmonary epithelial cells, J774 mouse macrophages and primary mouse bone marrow-derived macrophages (BMMs) was investigated. iNOS expression was induced by a cytokine mixture (TNF, IFNγ and IL-1β) in A549 cells and by LPS in J774 cells, and it was inhibited by p38 MAPK inhibitors SB202190 and BIRB 796. Stimulation with cytokine mixture or LPS enhanced also DUSP1 expression. Down-regulation of DUSP1 by siRNA increased p38 MAPK phosphorylation and iNOS expression in A549 and J774 cells. In addition, LPS-induced iNOS expression was enhanced in BMMs from DUSP1(−/−) mice as compared to that in BMMs from wild-type mice. The results indicate that DUSP1 suppresses iNOS expression by limiting p38 MAPK activity in human and mouse cells. Compounds that enhance DUSP1 expression or modulate its function may be beneficial in diseases complicated with increased iNOS-mediated NO production

    Quality assessment of cadmium telluride as a detector material for multispectral medical imaging

    Get PDF
    Cadmiumtelluride (CdTe) is a high-Z material with excellent photon radiation absorption properties, making it a promising material to include in radiation detection technologies. However, the brittleness of CdTe crystals as well as their varying concentration of defects necessitate a thorough quality assessment before the complex detector processing procedure. We present our quality assessment of CdTe as a detector material for multispectralmedical imaging, a research which is conducted as part of the Consortium Project Multispectral Photon-counting for Medical Imaging and Beam characterization (MPMIB). The aim of the project is to develop novel CdTe detectors and obtain spectrum-per-pixel information that make the distinction between different radiation types and tissues possible. To evaluate the defect density inside the crystals - which can deteriorate the detector performance - we employ infrared microscopy (IRM). Posterior data analysis allows us to visualise the defect distributions as 3D defect maps. Additionally, we investigate front and backside differences of the material with current-voltage (IV) measurements to determine the preferred surface for the pixelisation of the crystal, and perform test measurements with the prototypes to provide feedback for further processing. We present the different parts of our quality assessment chain and will close with first experimental results obtained with one of our prototype photon-counting detectors in a small tomographic setup.Peer reviewe

    Development of a New Clusterization Method for the GEM-TPC Detector

    Get PDF
    The Facility for Antiproton and Ion Research FAIR, in Darmstadt Germany, will be one of the largest accelerator laboratories worldwide. The Superconducting FRagment Separator (Super-FRS)* is one of its main components. The Super-FRS can produce, separate and deliver high-energy radioactive beams with intensities up to 1e11 ions/s, covering projectiles from protons up to uranium and it can be used as an independent experimental device. The Gas Electron Multiplier-based Time Projection Chambers (GEM-TPC) in twin configuration is a newly developed beam tracking detector capable of providing spatial resolution of less than 1 mm with a tracking efficiency close to 100% at 1 MHz counting rate. The GEM-TPC (HGB4) was tested at the FRagment Separator (FRS), with 238U beam at 850 MeV/u. A new clusterization method was developed, for the first time and used for an analysis. This method allowed to access to waveforms of each strip signal within a single trigger in an event-by-event basis. The procedures involved in this method will be shown in details.Peer reviewe

    Simulations of the GEM-TPC response

    Get PDF
    corecore