91 research outputs found
Extrapolated shock fitting for two-dimensional flows on structured grids
Over the years the development of structured-grid shock-fitting techniques faced two main problems: the handling of a moving discontinuity on a fixed background grid and the capability of simulating complex flow configurations. In the proposed work, the authors present a new shock-fitting technique for structured-grid solvers that is capable of overcoming the limitations that affected the different approaches originally developed. The technique presented here removes the tight link between grid topology and shock topology, which characterizes previous shock fitting as well as front tracking methods. This significantly simplifies their implementation and more importantly reduces the computational overhead related to these geometrical manipulations. Interacting discontinuities and shocks interacting with a solid boundary are discussed and analyzed. Finally, a quantitative investigation of the error reduction obtained with the approach proposed via a global grid convergence analysis is presented
Numerical Investigation of the Failure Phenomena in Adhesively Bonded Joints by Means of a Multi-Linear Equivalent Plastic Stress/Strain Approach
Abstract In this work, a multi-linear material model for elastic-plastic response of ductile adhesives is proposed. Indeed, the proposed formulation allows to evaluate equivalent stress and strains to be used as material model input in FE commercial codes instead of the classical true stress and true strains. The presented model, which is capable to simulate the plasticity related phenomena and the failure event, has been implemented in the FEM code ABAQUS and used to numerically simulate the mechanical behaviour of adhesively bonded joints in traction. Several joints configurations have been considered with ductile, fragile and mix adhesives' behaviour to test the effectiveness and the range of applicability of the proposed model. Encouraging comparisons with literature experimental data demonstrates the added value of the suggested material model in predicting the failure of adhesively bonded joints
Hypersensitivity in molar incisor hypomineralization: Superficial infiltration treatment
To date, there are no standardized protocols available in the literature for hypersensitivity treatment in molar incisor hypomineralization (MIH) patients. The aim of this study was to evaluate the efficacy of erosion\u2013infiltration treatments with resin in children with a strong hypersensitivity and also to develop a minimally invasive diagnostic\u2013therapeutic pathway for young MIH patients. Patients with clinical signs of MIH were enrolled according to international guidelines. A total of 42 patients (8\u201314 years old) with sensitivity of at least one molar and patients with post eruptive enamel fractures, but without dentin involvement or cavitated carious lesions were selected. A single superficial infiltration treatment with ICON (DMG, Germany) was performed with a modified etching technique. Sensitivity was tested with the Schiff Scale and Wong Baker Face Scale and was repeated at 12 months follow\u2010up. All patients reported lower sensitivity values at the end of the treatment. Significant differences of sensitivity according to the Schiff scale were reported between T0 and all subsequent follow\u2010ups, p < 0.05. The treatment of erosion infiltration with ICON resin is a minimally invasive preventive treatment that significantly improves the problem of hypersensitivity in permanent molars with MIH
Runge-Kutta residual distribution schemes
We are concerned with the solution of time-dependent non-linear hyperbolic partial differential equations. We investigate the combination of residual distribution methods with a consistent mass matrix (discretisation in space) and a RungeâKutta-type time-stepping (discretisation in time). The introduced non-linear blending procedure allows us to retain the explicit character of the time-stepping procedure. The resulting methods are second order accurate provided that both spatial and temporal approximations are. The proposed approach results in a global linear system that has to be solved at each time-step. An efficient way of solving this system is also proposed. To test and validate this new framework, we perform extensive numerical experiments on a wide variety of classical problems. An extensive numerical comparison of our approach with other multi-stage residual distribution schemes is also given
Improved Detection Criteria for the Multi-dimensional Optimal Order Detection (MOOD) on unstructured meshes with very high-order polynomials
This paper extends the MOOD method proposed by the authors in ["A high-order finite volume method for hyperbolic systems: Multidimensional Optimal Order Detection (MOOD)", J. Comput. Phys. 230, pp 4028-4050, (2011)], along two complementary axes: extension to very high-order polynomial reconstruction on non-conformal unstructured meshes and new Detection Criteria. The former is a natural extension of the previous cited work which confirms the good behavior of the MOOD method. The latter is a necessary brick to overcome limitations of the Discrete Maximum Principle used in the previous work. Numerical results on advection problems and hydrodynamics Euler equations are presented to show that the MOOD method is effectively high-order (up to sixth-order), intrinsically positivity-preserving on hydrodynamics test cases and computationally efficient
QM/MM MD and Free Energy Simulations of G9a-Like Protein (GLP) and Its Mutants: Understanding the Factors that Determine the Product Specificity
Certain lysine residues on histone tails could be methylated by protein lysine methyltransferases (PKMTs) using S-adenosyl-L-methionine (AdoMet) as the methyl donor. Since the methylation states of the target lysines play a fundamental role in the regulation of chromatin structure and gene expression, it is important to study the property of PKMTs that allows a specific number of methyl groups (one, two or three) to be added (termed as product specificity). It has been shown that the product specificity of PKMTs may be controlled in part by the existence of specific residues at the active site. One of the best examples is a Phe/Tyr switch found in many PKMTs. Here quantum mechanical/molecular mechanical (QM/MM) molecular dynamics (MD) and free energy simulations are performed on wild type G9a-like protein (GLP) and its F1209Y and Y1124F mutants for understanding the energetic origin of the product specificity and the reasons for the change of product specificity as a result of single-residue mutations at the Phe/Tyr switch as well as other positions. The free energy barriers of the methyl transfer processes calculated from our simulations are consistent with experimental data, supporting the suggestion that the relative free energy barriers may determine, at least in part, the product specificity of PKMTs. The changes of the free energy barriers as a result of the mutations are also discussed based on the structural information obtained from the simulations. The results suggest that the space and active-site interactions around the Δ-amino group of the target lysine available for methyl addition appear to among the key structural factors in controlling the product specificity and activity of PKMTs
A Comparative Study on the Nonlinear Interaction Between a Focusing Wave and Cylinder Using State-of-the-art Solvers: Part A
This paper presents ISOPEâs 2020 comparative study on the interaction between focused waves and a fixed cylinder. The paper discusses the qualitative and quantitative comparisons between 20 different numerical solvers from various universities across the world for a fixed cylinder. The moving cylinder cases are reported in a companion paper as part B (Agarwal, Saincher, et al., 2021). The numerical solvers presented in this paper are the recent state of the art in the field, mostly developed in-house by various academic institutes. The majority of the participants used hybrid modeling (i.e., a combination of potential flow and NavierâStokes solvers). The qualitative comparisons based on the wave probe and pressure probe time histories and spectral components between laminar, turbulent, and potential flow solvers are presented in this paper. Furthermore, the quantitative error analyses based on the overall relative error in peak and phase shifts in the wave probe and pressure probe of all the 20 different solvers are reported. The quantitative errors with respect to different spectral component energy levels (i.e., in primary, sub-, and superharmonic regions) capturing capability are reported. Thus, the paper discusses the maximum, minimum, and median relative errors present in recent solvers as regards application to industrial problems rather than attempting to find the best solver. Furthermore, recommendations are drawn based on the analysis
Preliminary results on very high order oscillation free Residual Distribution schemes for hyperbolic systems
Since a few years, the Residual Distribution (RD) methodology has become a more mature numerical technique. It has been applied to several physical problems: standard aerodynamic problems, MHD flows, multiphase flow problems, the Shallow Water equations, aeroacoustic, to give a few examples [1,2,3]. There are also interesting contributions from other groups. These schemes are devoted to steady and unsteady problems and lead to nonlinear problems. In most cases, the expected order of accuracy is second order in space (and time for non steady problems). The accuracy is obtained only if the solution of the non linear problem is obtained with enough accuracy. The RD schemes borrow features from the finite element world: they can be interpreted as a Petrovâ Galerkin scheme where the test space may depend on the solution. They also borrow features from the high order TVDâlike world in that the stabilization mechanism for non smooth problems is constructed by mimicking the non oscillatory mechanism of some monotone schemes without sacrificing (formal) accuracy. Since some times there is an attempt to extend them to more than second order accuracy. Early results were obtained in [4] for steady scalar problems. The expected order of accuracy (third and fourth order) was obtained in practice for smooth solutions, while the schemes were proved to be non oscillatory. However, some problems were observed by M. Ricchiuto in his PhD thesis and by M. Hubbards (Leeds). More recently, the authors hav
- âŠ