534 research outputs found
Sign patterns for chemical reaction networks
Most differential equations found in chemical reaction networks (CRNs) have
the form , where lies in the nonnegative orthant, where
is a real matrix (the stoichiometric matrix) and is a column vector
consisting of real-valued functions having a special relationship to . Our
main interest will be in the Jacobian matrix, , of , in particular
in whether or not each entry has the same sign for all in the
orthant, i.e., the Jacobian respects a sign pattern. In other words species
always acts on species in an inhibitory way or its action is always
excitatory.
In Helton, Klep, Gomez we gave necessary and sufficient conditions on the
species-reaction graph naturally associated to which guarantee that the
Jacobian of the associated CRN has a sign pattern. In this paper, given we
give a construction which adds certain rows and columns to , thereby
producing a stoichiometric matrix corresponding to a new CRN with
some added species and reactions. The Jacobian for this CRN based on
has a sign pattern. The equilibria for the and the based CRN are
in exact one to one correspondence with each equilibrium for the original
CRN gotten from an equilibrium for the new CRN by removing its added
species. In our construction of a new CRN we are allowed to choose rate
constants for the added reactions and if we choose them large enough the
equilibrium is locally asymptotically stable if and only if the
equilibrium is locally asymptotically stable. Further properties of the
construction are shown, such as those pertaining to conserved quantities and to
how the deficiencies of the two CRNs compare.Comment: 23 page
Shot Noise in Ballistic Graphene
We have investigated shot noise in graphene field effect devices in the
temperature range of 4.2--30 K at low frequency ( = 600--850 MHz). We find
that for our graphene samples with large width over length ratio , the
Fano factor reaches a maximum 1/3 at the
Dirac point and that it decreases strongly with increasing charge density. For
smaller , the Fano factor at Dirac point is significantly lower. Our
results are in good agreement with the theory describing that transport at the
Dirac point in clean graphene arises from evanescent electronic states.Comment: Phys. Rev. Lett. 100, 196802 (2008
Molybdenum targets for production of 99mTc by a medical cyclotron
Introduction
Alternative methods for producing the medical imaging isotope 99mTc are actively being developed around the world in anticipation of the imminent shutdown of the National Research Universal (NRU) reactor in Chalk River, Ontario, Canada and the high flux reactor (HFR) in Petten, Holland that together currently produce up to 80 % of the world’s supply through fission. The most promising alternative methods involve accelerators that focus Bremsstrahlung radiation or protons on metallic targets comprised of 100Mo and a supporting material used to conduct heat away during irradiation. As an example, the reaction 100Mo(p,2n)99mTc provides a direct route that can be incorporated into routine production in regional nuclear medicine centers that possess medical cyclotrons for production of other isotopes, such as those used for Positron Emission Tomography (PET).
The targets used to produce 99mTc are subject to a number of operational constraints. They must withstand the temperatures generated by the irradiation and be fashioned to accommodate temperature gradients from in situ cooling. The targets must be resilient, which means they cannot disintegrate during irradiation or post processing, because of the radioactive nature of the products. Yet, the targets must be easily post-processed to separate the 99mTc. In addition, the method used to manufacture the targets must not be wasteful of the 100Mo, because of its cost (~$2/mg). Any manufacturing process should be able to function remotely in a shielded space to accommodate the possibility of radioactive recycled target feedstock. There are a number of methods that have been proposed for large-scale target manufacturing including electrophoretic deposition, pressing and sinter-ing, electroplating and carburization [1]. How to develop these methods for routine production is an active business [2,3]. From the industrial perspective, plasma spraying showed promising results initially [4], but the process became very expensive requiring customized equipment in order to reduce losses because of overspray,which also required a large inventory of expen-sive feedstock. In this paper we report the ex-perimental validation of an industrial process for production of targets comprising a Mo layer and a copper support.
Materials and methods
Target Design
Targets have been manufactured for irradiation at 15 MeV. Two targets are shown in FIG. 1: one as-manufactured and another after irradiation; no visible changes were observed following irradiation. The supporting circular copper (C101) disks have diameters of 24 mm and thickness of 1.6 mm. The molybdenum in the center of the target is fully dense with thickness 230 μm determined from SEM cross-sections.Targets have also been manufactured for irradi-ation in a general-purpose target holder designed to be attached to all makes of cyclotrons found in regional nuclear medicine centers. The elliptical targets were designed for high-volume production of 99mTc with 15 MeV protons at currents of 400 µA with 15% collimation [4]. The elliptical shape reduces the heat flux associated with high current sources. The cooling channels on the back of the target are designed to with-stand the high temperature generated during Irradiation.
A thermal simulation of expected temperatures during irradiation is shown in FIG. 3. The center of the target is expected to reach 260 oC during irradiation. The elliptical targets were formed from a 27 mm C101 copper plate with width 22 mm and length 55 mm. The molybdenum in the center of the target is fully dense with thickness 60 m de-termined from SEM cross-sections. FIG. 4 shows the molybdenum deposition in the center of the target in a form of an ellipse (38×10 mm).
Results and Conclusions
Circular targets have been produced and suc-cessfully irradiated for up to 5 h with a proton beam with energy 15 MeV and current 50 µA. (FIG. 1). The targets were resilient. Before irradi-ation the targets were subjected to mechanical shock tests and thermal gradients with no ob-servable effect. After irradiation there was no indication of any degradation. The manufacturing process produced 20 consistently reproducible targets within an hour with a molybdenum loss of less than 2 %. After irradiation the targets were chemically processed and the products characterized by Ge-HP gamma spectrometry. Only Tc isotopes were found. No other contami-nants were identified after processing. The de-tails of the separation and purification are de-scribed elsewhere [5].
Circular targets suitable for low-volume produc-tion of 99mTc have been manufactured and test-ed. The targets have been shown to meet the required operation constraints: the targets are resilient withstanding mechanical shock and irradiation conditions; they are readily produced with minimal losses; and post-processing after irradiation for 5 h has been shown to produce 99mTc.
Elliptical targets suitable for high-volume pro-duction of 99mTc with high power cyclotrons have been manufactured (FIG. 4). Like the circular targets, the elliptical targets are readily pro-duced with minimal losses and are able to with-stand mechanical shock and thermal gradients; however, they have yet to be irradiated
Octahedral tilting, monoclinic phase and the phase diagram of PZT
Anelastic and dielectric spectroscopy measurements on PZT close to the
morphotropic (MPB) and antiferroelectric boundaries provide new insight in some
controversial aspects of its phase diagram. No evidence is found of a border
separating monoclinic (M) from rhombohedral (R) phases, in agreement with
recent structural studies supporting a coexistence of the two phases over a
broad composition range x < 0.5, with the fraction of M increasing toward the
MPB. It is also discussed why the observed maximum of elastic compliance
appears to be due to a rotational instability of the polarisation and therefore
cannot be explained by extrinsic softening from finely twinned R phase alone,
but indicates the presence also of M phase, not necessarily homogeneous.
A new diffuse transition is found within the ferroelectric phase near x ~
0.1, at a temperature T_IT higher than the well established boundary T_T to the
phase with tilted octahedra. It is proposed that around T_IT the octahedra
start rotating in a disordered manner and finally become ordered below T_T. In
this interpretation, the onset temperature for octahedral tilting monotonically
increases up to the antiferroelectric transition of PbZrO3, and the depression
of T_T(x) below x = 0.18 would be a consequence of the partial relieve of the
mismatch between the cation radii with the initial stage of tilting below T_IT.Comment: submitted to J. Phys.: Condens. Matte
High intensity femtosecond laser deposition of diamond-like carbon thin films
Hydrogen-free diamond-like carbon (DLC) films have been deposited with a 100 fs (FWHM) Ti:sapphire laser beam at intensities I in the 1014–1015 W/cm21014–1015W/cm2 range. The films were studied with scanning probe microscopy, variable angle spectroscopic ellipsometry, Raman spectroscopy, and electron energy loss spectroscopy. DLC films with good scratch resistance, excellent chemical inertness, and high optical transparency in the visible and near infrared range were deposited at room temperature. As the laser intensity was increased from 3×10143×1014 to 6×1015 W/cm2,6×1015W/cm2, the films showed an increased surface particle density, a decreased optical transparency (85%→60%),(85%→60%), and Tauc band gap (1.4→0.8 eV),(1.4→0.8eV), as well as a lower sp3sp3 content (60%→50%).(60%→50%). The time-of-flight spectra recorded from the laser plume exhibited a double-peak distribution, with a high energy suprathermal ion peak preceding a slower thermal component. The most probable ion kinetic energy showed an I0.55I0.55 dependence, increasing from 300 to 2000 eV, when the laser intensity was varied from 3×10143×1014 to 6×1015 W/cm2,6×1015W/cm2, while the kinetic energy of suprathermal ions increased from 3 to over 20 keV and showed an I0.33I0.33 dependence. These high energy ions are believed to have originated from an electrostatic acceleration field established by suprathermal electrons which were formed by resonant absorption of the intense laser beams. © 1999 American Institute of Physics.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/70817/2/JAPIAU-86-4-2281-1.pd
Large-area functionalized CVD graphene for work function matched transparent electrodes
PublishedArticleThe efficiency of flexible photovoltaic and organic light emitting devices is heavily dependent on the availability of flexible and transparent conductors with at least a similar workfunction to that of Indium Tin Oxide. Here we present the first study of the work function of large area (up to 9 cm2) FeCl3 intercalated graphene grown by chemical vapour deposition on Nickel, and demonstrate values as large as 5.1 eV. Upon intercalation, a charge density per graphene layer of 5 ⋅ 1013 ± 5 ⋅ 1012 cm−2 is attained, making this material an attractive platform for the study of plasmonic excitations in the infrared wavelength spectrum of interest to the telecommunication industry. Finally, we demonstrate the potential of this material for flexible electronics in a transparent circuit on a polyethylene naphthalate substrate.EPSRCRoyal Society international Exchanges Schem
Data sources and computational approaches for generating models of gene regulatory networks
[No abstract available
Large scale flood risk mapping in data scarce environments: An application for Romania
Large-scale flood risk assessment is essential in supporting national and global policies, emergency operations and land-use management. The present study proposes a cost-efficient method for the large-scale mapping of direct economic flood damage in data-scarce environments. The proposed framework consists of three main stages: (i) deriving a water depth map through a geomorphic method based on a supervised linear binary classification; (ii) generating an exposure land-use map developed from multi-spectral Landsat 8 satellite images using a machine-learning classification algorithm; and (iii) performing a flood damage assessment using a GIS tool, based on the vulnerability (depth-damage) curves method. The proposed integrated method was applied over the entire country of Romania (including minor order basins) for a 100-year return time at 30-m resolution. The results showed how the description of flood risk may especially benefit from the ability of the proposed cost-efficient model to carry out large-scale analyses in data-scarce environments. This approach may help in performing and updating risk assessments and management, taking into account the temporal and spatial changes in hazard, exposure, and vulnerability
- …