38,786 research outputs found
Self-organized Criticality and Absorbing States: Lessons from the Ising Model
We investigate a suggested path to self-organized criticality. Originally,
this path was devised to "generate criticality" in systems displaying an
absorbing-state phase transition, but closer examination of the mechanism
reveals that it can be used for any continuous phase transition. We used the
Ising model as well as the Manna model to demonstrate how the finite-size
scaling exponents depend on the tuning of driving and dissipation rates with
system size.Our findings limit the explanatory power of the mechanism to
non-universal critical behavior.Comment: 5 pages, 2 figures, REVTeX
The effects of bedrest on crew performance during simulated shuttle reentry. Volume 2: Control task performance
A simplified space shuttle reentry simulation performed on the NASA Ames Research Center Centrifuge is described. Anticipating potentially deleterious effects of physiological deconditioning from orbital living (simulated here by 10 days of enforced bedrest) upon a shuttle pilot's ability to manually control his aircraft (should that be necessary in an emergency) a comprehensive battery of measurements was made roughly every 1/2 minute on eight military pilot subjects, over two 20-minute reentry Gz vs. time profiles, one peaking at 2 Gz and the other at 3 Gz. Alternate runs were made without and with g-suits to test the help or interference offered by such protective devices to manual control performance. A very demanding two-axis control task was employed, with a subcritical instability in the pitch axis to force a high attentional demand and a severe loss-of-control penalty. The results show that pilots experienced in high Gz flying can easily handle the shuttle manual control task during 2 Gz or 3 Gz reentry profiles, provided the degree of physiological deconditioning is no more than induced by these 10 days of enforced bedrest
On the nonlinear deformation geometry of Euler-Bernoulli beams
Nonlinear expressions are developed to relate the orientation of the deformed beam cross section, torsion, local components of bending curvature, angular velocity, and virtual rotation to deformation variables. The deformed beam kinematic quantities are proven to be equivalent to those derived from various rotation sequences by identifying appropriate changes of variable based on fundamental uniqueness properties of the deformed beam geometry. The torsion variable used is shown to be mathematically analogous to an axial deflection variable commonly used in the literature. Rigorous applicability of Hamilton's principle to systems described by a class of quasi-coordinates that includes these variables is formally established
Avalanche Behavior in an Absorbing State Oslo Model
Self-organized criticality can be translated into the language of absorbing
state phase transitions. Most models for which this analogy is established have
been investigated for their absorbing state characteristics. In this article,
we transform the self-organized critical Oslo model into an absorbing state
Oslo model and analyze the avalanche behavior. We find that the resulting gap
exponent, D, is consistent with its value in the self-organized critical model.
For the avalanche size exponent, \tau, an analysis of the effect of the
external drive and the boundary conditions is required.Comment: 4 pages, 2 figures, REVTeX 4, submitted to PRE Brief Reports; added
reference and some extra information in V
Hingeless helicopter rotor with improved stability
Improved stability was provided in a hingeless helicopter rotor by inclining the principal elastic flexural axes and coupling pitching of the rotor blade with the lead-lag bending of the blade. The primary elastic flex axes were inclined by constructing the blade of materials that display non-uniform stiffness, and the specification described various cross section distributions and the resulting inclined flex axes. Arrangements for varying the pitch of the rotor blade in a predetermined relationship with lead-lag bending of the blade, i.e., bending of the blade in a plane parallel to its plane of rotation were constructed
New design of hingeless helicopter rotor improves stability
Cantilever blades are attached directly to rotor hub, thereby substantially reducing cost and complexity and increasing reliability of helicopter rotor. Combination of structural flap-lag coupling and pitch-lag coupling provides damping of 6 to 10%, depending on magnitude of coupling parameters
Characterizations of linear sufficient statistics
A surjective bounded linear operator T from a Banach space X to a Banach space Y must be a sufficient statistic for a dominated family of probability measures defined on the Borel sets of X. These results were applied, so that they characterize linear sufficient statistics for families of the exponential type, including as special cases the Wishart and multivariate normal distributions. The latter result was used to establish precisely which procedures for sampling from a normal population had the property that the sample mean was a sufficient statistic
Capturing, using, and managing quality assurance knowledge for shuttle post-MECO flight design
Ascent initialization values used by the Shuttle's onboard computer for nominal and abort mission scenarios are verified by a six degrees of freedom computer simulation. The procedure that the Ascent Post Main Engine Cutoff (Post-MECO) group uses to perform quality assurance (QA) of the simulation is time consuming. Also, the QA data, checklists and associated rationale, though known by the group members, is not sufficiently documented, hindering transfer of knowledge and problem resolution. A new QA procedure which retains the current high level of integrity while reducing the time required to perform QA is needed to support the increasing Shuttle flight rate. Documenting the knowledge is also needed to increase its availability for training and problem resolution. To meet these needs, a knowledge capture process, embedded into the group activities, was initiated to verify the existing QA checks, define new ones, and document all rationale. The resulting checks were automated in a conventional software program to achieve the desired standardization, integrity, and time reduction. A prototype electronic knowledge base was developed with Macintosh's HyperCard to serve as a knowledge capture tool and data storage
Influence of diesel surrogates on the behavior of simplified spray models
Numerous experimental investigations make use of diesel surrogates to make the computational time reasonable. In the few studies where measured (surrogate and real diesel) and computed (surrogate only) results have been compared, the selection methodology for the surrogate constituent compounds and the measures taken to validate the chemical kinetic models are not discussed, and the range of operating conditions used is often small. Additionally, most simplified models use tuning variables to fit model results to measurements. This work makes the comparison between some frequently used diesel surrogates using a simple 1D vaporizing spray model, with the spray cone angle as the tuning parameter. Results show that liquid length and fuel fraction strongly depend on the physical properties of the used fuel for a fixed spray angle. These parameters are important for modeling auto-ignition and pollutant formation. The spray angle is varied till the spray length is the same for each surrogate. Results show important differences between other spray parameters such as local mixture fraction and axial velocity
Correcting turnover correlations: A critique
In this article, the authors argue that turnover correlations do not need to be corrected. First, they maintain that correction formulas cannot correct for poor construct validity. Second, they discuss the original purposes of turnover correction formulas. Third, the authors describe the logical fallacies of correcting turnover correlations. Finally, they show why turnover correlations are not, as is widely believed, statistically limited to a maximum of .80
- …