Energy efficient engine preliminary design and integration studies

The characteristics and systems benefits of an energy efficient engine (E3) suitable for use on advanced subsonic transport aircraft were determined. Relative to a current CF6-50C engine, the following benefits were estimated: 14.4% reduction in installed cruise specific fuel consumption, and a reduction in direct operating cost of more than 5%. The advanced technology E3 system would also permit: compliance with FAR 36 (1977) noise limits, and compliance with 1981 EPA emission standards

Keeper-animal interactions: differences between the behaviour of zoo animals affect stockmanship

Stockmanship is a term used to describe the management of animals with a good stockperson someone who does this in a in a safe, effective, and low-stress manner for both the stock-keeper and animals involved. Although impacts of unfamiliar zoo visitors on animal behaviour have been extensively studied, the impact of stockmanship i.e familiar zoo keepers is a new area of research; which could reveal significant ramifications for zoo animal behaviour and welfare. It is likely that different relationships are formed dependant on the unique keeper-animal dyad (human-animal interaction, HAI). The aims of this study were to (1) investigate if unique keeper-animal dyads were formed in zoos, (2) determine whether keepers differed in their interactions towards animals regarding their attitude, animal knowl- edge and experience and (3) explore what factors affect keeper-animal dyads and ultimately influence animal behaviour and welfare. Eight black rhinoceros (Diceros bicornis), eleven Chapman’s zebra (Equus burchellii), and twelve Sulawesi crested black macaques (Macaca nigra) were studied in 6 zoos across the UK and USA. Subtle cues and commands directed by keepers towards animals were identified. The animals latency to respond and the respective behavioural response (cue-response) was recorded per keeper-animal dyad (n=93). A questionnaire was constructed following a five-point Likert Scale design to record keeper demographic information and assess the job satisfaction of keepers, their attitude towards the animals and their perceived relationship with them. There was a significant difference in the animals’ latency to appropriately respond after cues and commands from different keepers, indicating unique keeper-animal dyads were formed. Stockmanship style was also different between keepers; two main components contributed equally towards this: “attitude towards the animals” and “knowledge and experience of the animals”. In this novel study, data demonstrated unique dyads were formed between keepers and zoo animals, which influenced animal behaviour

THE EFQM EXCELLENCE MODEL AS ENABLER OF E-PROCUREMENT ADOPTION AND THE EFFECT ON PERFORMANCE

The objective of this paper is to examine the EFQM Excellence Model as an enabler of E-procurement adoption and the effect on purchasing performance. The study utilized a cross-sectional telephone survey of a sample of Spanish manufacturing companies using multiple informants. A total of 200 firms responded making a total of 800 responses. Data was analyzed using structural equations modelling. The results indicate that the Business Excellence Enablers (Leadership, Strategy, People, Resources, and Processes) act as enablers of E-procurement and help to realize gains in purchasing performance

Activity, stability and 3-D structure of the Cu(II) form of a chitin-active lytic polysaccharide monooxygenase from Bacillus amyloliquefaciens

The enzymatic deconstruction of recalcitrant polysaccharide biomass is central to the conversion of these substrates for societal benefit, such as in biofuels. Traditional models for enzyme-catalysed polysaccharide degradation involved the synergistic action of endo-, exo-and processive glycoside hydrolases working in concert to hydrolyse the substrate. More recently this model has been succeeded by one featuring a newly discovered class of mononuclear copper enzymes: lytic polysaccharide monooxygenases (LPMOs; classified as Auxiliary Activity (AA) enzymes in the CAZy classification). In 2013, the structure of an LPMO from Bacillus amyloliquefaciens, BaAA10, was solved with the Cu centre photoreduced to Cu(I) in the X-ray beam. Here we present the catalytic activity of BaAA10. We show that it is a chitin-active LPMO, active on both α and β chitin, with the Cu(II) binding with low nM KD, and the substrate greatly increasing the thermal stability of the enzyme. A spiral data collection strategy has been used to facilitate access to the previously unobservable Cu(II) state of the active centre, revealing a coordination geometry around the copper which is distorted from axial symmetry, consistent with the previous findings from EPR spectroscopy

Floor feeding sows their daily allocation over multiple drops per day does not result in more equitable feeding opportunities in later drops

This research studied whether floor feeding group-housed sows their daily allocation overmultiple feed drops per day provides more equitable feeding opportunities in later drops. Over four time replicates, 275 sows were mixed into groups of 10 for both their first and second gestations (200 sows/gestation, 126 sows observed in both gestations). The feeding behavior of individual sows was recorded for 10 min following each of four feed drops per day (0730, 0900, 1100, 1500 h) on days 2, 9 and 51 post-mixing. The location of feeding sows (i.e., feeding in areas associated with high, reduced or little/no food availability) was also recorded. Sow aggressive behavior on day 2 was used to classify sows as dominant (D), subdominant (SD), or submissive (SM). Dominant sows spent the most time feeding in areas of high-food availability (gestation 1, p p = 0.023); SD sows fed more frequently than D sows from areas of reduced food availability (gestation 1, p = 0.001; gestation 2, p = 0.025); and SM sows performed more feeding behavior in areas of little/no food availability (gestation 1, p p p > 0.05). Further research on the management and design of floor feeding systems is required, with a particular emphasis on increasing accessibility to sows that avoid the feeding area

Craig Goch Report No. 9 Mass mortalities of adult salmon (Salmo salar L.) in the R. Wye, 1976

The physical, biological and chemical conditions leading to a mass mortality of adult salmon (Salmo salar L.) in the lower reaches of the R. Wye are described. As a result of sunny and low flow conditions during late June, 1976, water temperatures increased to a maximum of 27.6oC and accelerated the decay of substantial plant stands, the growth of which had been enhanced by the prevailing conditions: this resulted in severe de-oxygenation of the water. It is concluded that the low oxygen concentration in the water at this time was the principal factor in causing mass mortalities of fish and was probably accentuated by high water temperatures

Craig Goch Report No. 10 The effect of density on mortality in juvenile Atlantic salmon (Salmo salar L.)

Le Cren (1973) suggested that the most likely population-regulating process in salmonid populations is density-dependent territorial behaviour. Thus, in trout (Salmo trutta L.) populations aggressive territorial behaviour was manifested in density-dependent mortality and the size of the adult stock was largely dependent on the area of suitable rearing ground for the fry (Le Cren, 1973). Ricker (1954) also concluded that in most fish populations compensatory mortality in the juvenile stages, rather than in the mature stock, was of greatest importance as a regulator of population size. The nature of such regulating mechanisms in juvenile populations is, therefore, of fundamental importance in the understanding of the dynamics of fish populations and the implementation of management policies. This paper considers mortality rates of young Atlantic salmon (Salmo salar L.) in the upper catchment of the R. Wye over a two year period. The work forms part of a broader study of fish populations in the R. Wye

Overview of the design of the ITER heating neutral beam injectors

The heating neutral beam injectors (HNBs) of ITER are designed to deliver 16.7MWof 1 MeVD0 or 0.87 MeVH0 to the ITER plasma for up to 3600 s. They will be the most powerful neutral beam\uf0a0(NB) injectors ever, delivering higher energy NBs to the plasma in a tokamak for longer than any previous systems have done. The design of the HNBs is based on the acceleration and neutralisation of negative ions as the efficiency of conversion of accelerated positive ions is so low at the required energy that a realistic design is not possible, whereas the neutralisation ofH 12 andD 12 remains acceptable ( 4856%). The design of a long pulse negative ion based injector is inherently more complicated than that of short pulse positive ion based injectors because: \u2022 negative ions are harder to create so that they can be extracted and accelerated from the ion source; \u2022 electrons can be co-extracted from the ion source along with the negative ions, and their acceleration must be minimised to maintain an acceptable overall accelerator efficiency; \u2022 negative ions are easily lost by collisions with the background gas in the accelerator; \u2022 electrons created in the extractor and accelerator can impinge on the extraction and acceleration grids, leading to high power loads on the grids; \u2022 positive ions are created in the accelerator by ionisation of the background gas by the accelerated negative ions and the positive ions are back-accelerated into the ion source creating a massive power load to the ion source; \u2022 electrons that are co-accelerated with the negative ions can exit the accelerator and deposit power on various downstream beamline components. The design of the ITER HNBs is further complicated because ITER is a nuclear installation which will generate very large fluxes of neutrons and gamma rays. Consequently all the injector components have to survive in that harsh environment. Additionally the beamline components and theNBcell, where the beams are housed, will be activated and all maintenance will have to be performed remotely. This paper describes the design of theHNBinjectors, but not the associated power supplies, cooling system, cryogenic system etc, or the high voltage bushingwhich separates the vacuum of the beamline fromthehighpressureSF6 of the high voltage (1MV) transmission line, through which the power, gas and coolingwater are supplied to the beam source. Also themagnetic field reduction system is not described