Optical emission investigation of laser-produced MgB2 plume expanding in an Ar buffer gas

Optical emission spectroscopy is used to study the dynamics of the plasma generated by pulsed-laser irradiation of a MgB2 target, both in vacuum and at different Ar buffer gas pressures. The analysis of the time-resolved emission of selected species shows that the Ar background gas strongly influences the plasma dynamics. Above a fixed pressure, plasma propagation into Ar leads to the formation of blast waves causing both a considerable increase of the fraction of excited Mg atoms and a simultaneous reduction of their kinetic flux energy. These results can be particularly useful for optimizing MgB2 thin film deposition processes.Comment: 11 pages,4 figures, Applied Physics Letters in pres

Measurement of the two-photon absorption cross-section of liquid argon with a time projection chamber

This paper reports on laser-induced multiphoton ionization at 266 nm of liquid argon in a time projection chamber (LAr TPC) detector. The electron signal produced by the laser beam is a formidable tool for the calibration and monitoring of next-generation large-mass LAr TPCs. The detector that we designed and tested allowed us to measure the two-photon absorption cross-section of LAr with unprecedented accuracy and precision: sigma_ex=(1.24\pm 0.10stat \pm 0.30syst) 10^{-56} cm^4s{-1}.Comment: 15 pages, 9 figure

Growth methods of c-axis oriented MgB2 thin films by pulsed laser deposition

High quality MgB2 thin films have been obtained by pulsed laser deposition both on MgO and on Al2O3 substrates using different methods. In the standard two-step procedure, an amorphous precursor layer is deposited at room temperature starting both from stoichiometric target and from boron target: after this first step, it is annealed in magnesium atmosphere in order to crystallize the superconducting phase. The so obtained films show a strong c-axis orientation, evidenced by XRD analysis, a critical temperature up to 38 K and very high critical fields along the basal planes, up to 22T at 15K. Also an in situ one step technique for the realization of superconducting MgB2 thin films has been developed. In this case, the presence of an argon buffer gas during deposition is crucial and we observe a strong dependence of the quality of the deposited film on the background gas pressure. The influence of the Ar atmosphere has been confirmed by time and space-resolved spectroscopy measurements on the emission spectrum of the plume. The Ar pressure modifies strongly the plasma kinetics by promoting excitation and ionization of the plume species, especially of the most volatile Mg atoms, increasing their internal energy.Comment: Paper presented at Boromag Workshop, Genoa 17-19 June 2002, in press on SUS

The GINGER Project and status of the ring-laser of LNGS

A ring-laser attached to the Earth measures the absolute angular velocity of the Earth summed to the relativistic precessions, de Sitter and Lense-Thirring. GINGER (Gyroscopes IN GEneral Relativity) is a project aiming at measuring the LenseThirring effect with a ground based detector; it is based on an array of ring-lasers. Comparing the Earth angular velocity measured by IERS and the measurement done with the GINGER array, the Lense-Thirring effect can be evaluated. Compared to the existing space experiments, GINGER provides a local measurement, not the averaged value and it is unnecessary to model the gravitational field. It is a proposal, but it is not far from being a reality. In fact the GrossRing G of the Geodesy Observatory of Wettzell has a sensitivity very close to the necessary one. G ofWettzell is part of the IERS system which provides the measure of the Length Of the DAY (LOD); G provides information on the fast component of LOD. In the last few years, a roadmap toward GINGER has been outlined. The experiment G-GranSasso, financed by the INFN Commission II, is developing instrumentations and tests along the roadmap of GINGER. In this short paper the main activities of G-GranSasso and some results will be presented. The first results of GINGERino will be reported, GINGERino is the large ring-laser installed inside LNGS and now in the commissioning phase. Ring-lasers provide as well important informations for geophysics, in particular the rotational seismology, which is an emerging field of science. GINGERino is one of the three experiments of common interest between INFN and INGV

Theoretical description of adiabatic laser alignment and mixed-field orientation: the need for a non-adiabatic model

We present a theoretical study of recent laser-alignment and mixed-field-orientation experiments of asymmetric top molecules. In these experiments, pendular states were created using linearly polarized strong ac electric fields from pulsed lasers in combination with weak electrostatic fields. We compare the outcome of our calculations with experimental results obtained for the prototypical large molecule benzonitrile (C$_7$H$_5$N) [J.L. Hansen et al, Phys. Rev. A, 83, 023406 (2011)] and explore the directional properties of the molecular ensemble for several field configurations, i.e., for various field strengths and angles between ac and dc fields. For perpendicular fields one obtains pure alignment, which is well reproduced by the simulations. For tilted fields, we show that a fully adiabatic description of the process does not reproduce the experimentally observed orientation, and it is mandatory to use a diabatic model for population transfer between rotational states. We develop such a model and compare its outcome to the experimental data confirming the importance of non-adiabatic processes in the field-dressed molecular dynamics.Comment: 11 pages, 9 figure

Orientation dependence of high-order harmonic generation in molecules

Published versio

One- and two-photon time-resolved fluorescence of visible and near-infrared dyes in scattering media

n/

Loading of Polydimethylsiloxane with a Human ApoB-Derived Antimicrobial Peptide to Prevent Bacterial Infections

Background: medical device-induced infections affect millions of lives worldwide and innovative preventive strategies are urgently required. Antimicrobial peptides (AMPs) appear as ideal candidates to efficiently functionalize medical devices surfaces and prevent bacterial infections. In this scenario, here, we produced antimicrobial polydimethylsiloxane (PDMS) by loading this polymer with an antimicrobial peptide identified in human apolipoprotein B, r(P)ApoBLPro. Methods: once obtained loaded PDMS, its structure, anti-infective properties, ability to release the peptide, stability, and biocompatibility were evaluated by FTIR spectroscopy, water contact angle measurements, broth microdilution method, time-killing kinetic assays, quartz crystal microbalance analyses, MTT assays, and scanning electron microscopy analyses. Results: PDMS was loaded with r(P)ApoBLPro peptide which was found to be present not only in the bulk matrix of the polymer but also on its surface. ApoB-derived peptide was found to retain its antimicrobial properties once loaded into PDMS and the antimicrobial material was found to be stable upon storage at 4◦ C for a prolonged time interval. A gradual and significant release (70% of the total amount) of the peptide from PDMS was also demonstrated upon 400 min incubation and the antimicrobial material was found to be endowed with anti-adhesive properties and with the ability to prevent biofilm attachment. Furthermore, PDMS loaded with r(P)ApoBLPro peptide was found not to affect the viability of eukaryotic cells. Conclusions: an easy procedure to functionalize PDMS with r(P)ApoBLPro peptide has been here developed and the obtained functionalized material has been found to be stable, antimicrobial, and biocompatible