Molecular characterization of a phytoplasma causing phyllody in clover and other herbaceous hosts in northern Italy

Red clover (Trifolium pratense) and Ladino clover (Trifolium repens) plants showing phytoplasma-associated symptoms (yellowing/reddening, virescence and phyllody) have been recovered in Friuli-Venezia Giulia, Italy. Using AluI RFLP analysis of PCR amplified 16S rDNA we showed that the disease can be caused independently by two phylogenetically distinct phytoplasmas. One of them showed the very typical 16S rDNA RFLP pattern of the agent of Clover Phyllody in Canada (CCPh). The 16S rDNA of the other phytoplasma (Italian Clover Phyllody phytoplasma, ICPhp) has been PCR amplified, cloned and sequenced. The sequence revealed high similarity (>98%) with phytoplasmas belonging to the X disease cluster, which includes organisms not reported to cause phyllody on their hosts. The analysis by AluI RFLP of the PCR amplified pathogen 16S rDNA from other herbaceous plants (Crepis biennis, Taraxacum officinale, Leucanthemum vulgare) collected nearby with phytoplasma-associated symptoms showed similar patterns. Southern blot hybridization of their EcoRI digested total DNA revealed identical RFLP patterns, suggesting that the causative agent may be the same organism

Exploring perinatal asphyxia by metabolomics

Brain damage related to perinatal asphyxia is the second cause of neuro-disability worldwide. Its incidence was estimated in 2010 as 8.5 cases per 1000 live births worldwide, with no further recent improvement even in more industrialized countries. If so, hypoxic-ischemic encephalopathy is still an issue of global health concern. It is thought that a consistent number of cases may be avoided, and its sequelae may be preventable by a prompt and efficient physical and therapeutic treatment. The lack of early, reliable, and specific biomarkers has up to now hampered a more effective use of hypothermia, which represents the only validated therapy for this condition. The urge to unravel the biological modifications underlying perinatal asphyxia and hypoxic-ischemic encephalopathy needs new diagnostic and therapeutic tools. Metabolomics for its own features is a powerful approach that may help for the identification of specific metabolic profiles related to the pathological mechanism and foreseeable outcome. The metabolomic profiles of animal and human infants exposed to perinatal asphyxia or developing hypoxic-ischemic encephalopathy have so far been investigated by means of 1H nuclear magnetic resonance spectroscopy and mass spectrometry coupled with gas or liquid chromatography, leading to the identification of promising metabolomic signatures. In this work, an extensive review of the relevant literature was performed

Optimal box-covering algorithm for fractal dimension of complex networks

The self-similarity of complex networks is typically investigated through computational algorithms the primary task of which is to cover the structure with a minimal number of boxes. Here we introduce a box-covering algorithm that not only outperforms previous ones, but also finds optimal solutions. For the two benchmark cases tested, namely, the E. Coli and the WWW networks, our results show that the improvement can be rather substantial, reaching up to 15% in the case of the WWW network.Comment: 5 pages, 6 figure

A Preliminary Investigation of the Cr3Si-Mo Pseudo-Binary Phase Diagram

An investigation was undertaken to study the phase relations in Cr3Si alloyed with Mo varying from 10 to 83.5 wt. % of the material. Specimens were prepared from arc-melted buttons that were subsequently heat treated at 1673 K for 200 h and air quenched to room temperature to structures. Alloys containing more than 20 wt. % MO were primarily two-phase materials of M3Si and M5Si3, where M is (Cr,Mo). Three alloys contained less than 5% of a third phase, which also had the M5Si3 crystal structure. Differential thermal analysis (DTA) was performed on several specimens at temperatures up to 2073 K in order to determine a solidus curve for the M3Si phase. Since only one DTA peak was observed in each alloy, the M5Si3 phase must melt above 2073 K, the maximum temperature examined. A preliminary pseudo-binary phase diagram for (Cr,Mo)3Si and a portion of the 1673 K isothermal section of the Cr-Mo-Si ternary phase diagram are presented

Creep Properties of NiAl-1Hf Single Crystals Re-Investigated

NiAl-1Hf single crystals have been shown to be quite strong at 1027 C, with strength levels approaching those of advanced Ni-based superalloys. Initial testing, however, indicated that the properties might not be reproducible. Study of the 1027 C creep behavior of four different NiAl-1Hf single-crystal ingots subjected to several different heat treatments indicated that strength lies in a narrow band. Thus, we concluded that the mechanical properties are reproducible. Recent investigations of the intermetallic NiAl have confirmed that minor alloying additions combined with single-crystal growth technology can produce elevated temperature strength levels approaching those of Ni-based superalloys. For example, General Electric alloy AFN 12 {Ni-48.5(at.%) Al-0.5Hf-1Ti-0.05Ga} has a creep rupture strength equivalent to Rene 80 combined with a approximately 30-percent lower density, a fourfold improvement in thermal conductivity, and the ability to form a self-protective alumina scale in aggressive environments. Although the compositions of strong NiAl single crystals are relatively simple, the microstructures are complex and vary with the heat treatment and with small ingot-toingot variations in the alloy chemistry. In addition, initial testing suggested a strong dependence between microstructure and creep strength. If these observations were true, the ability to utilize NiAl single-crystal rotating components in turbine machinery could be severely limited. To investigate the possible limitations in the creep response of high-strength NiAl single crystals, the NASA Glenn Research Center at Lewis Field initiated an in depth investigation of the effect of heat treatment on the microstructure and subsequent 1027 C creep behavior of [001]-oriented NiAl-1Hf with a nominal chemistry of Ni-47.5Al-1Hf-0.5Si. This alloy was selected since four ingots, grown over a number of years and possessing slightly different compositions, were available for study. Specimens taken from the ingots were subjected to several heat treatment schedules, examined by transmission electron microscopy, and tested in both compression and tension. An example of the microstructure found in a [001]-oriented NiAl-1Hf specimen after a solution treatment at 1317 C for 50 hr followed by air cooling is illustrated in the image on the left, where the NiAl matrix contains a uniform distribution of nanometer-scale Gphase (Ni16Hf6Si7) precipitates. Other heat treating schedules produced microstructures with nanometer-sized G-phase cubes and plates or, in an extreme case, produced a microstructure with all the G-phase converted to Heusler (Ni2AlHf) particles. The results of 1027 C creep strength and strain rate testing are illustrated which summarizes data from tensile and compressive testing of samples cut from all four NiAl-1Hf ingots and subjected to a variety of heat treatment schedules. With one exception, all the strength values lie in a narrow band that spans six orders of magnitude in strain rate. The only factor that produced results outside of this band was the heat treatment schedule that dissolved all the G-phase and replaced it with Heusler precipitates. The results portrayed in this figure lead to the important practical conclusion that the elevated-temperature creep properties of NiAl-1Hf single crystals are reproducible and are not affected by small variations in alloy chemistry from ingot to ingot or by different initial distributions of G-phase in the heat-treated alloy. The only variable in this study that produced a significant and delerious effect on mechanical strength was a post-solution heat treatment that lead to the complete disappearance of the G-phase in favor of Heusler precipitates

Pharmacological treatment of ceftriaxone-related cholelithiasis in children: is it worthwhile?

Ceftriaxone treatment of bacterial infections can be associated with biliary complications, more commonly in children than adults, in a dosedependent manner. This study describes a clinical case series of children with ceftriaxone-related cholelithiasis. We performed a retrospective analysis of cases of ceftriaxone-related biliary complications admitted to the Pediatric Clinic, Department of Clinical and Experimental Medicine, University of Sassari, Italy, during the period 2005-2015. Four children with cholelithiasis occurring during, or soon after, the treatment with ceftriaxone are reported. Case 1 (6-month-old), case 2 (9-yearold) and case 4 (10-year-old) were symptomatic, while case 3 (3-year-old) was asymptomatic. After the ultrasonographic diagnosis of gallstones (cases 1 and 2) or biliary sludge (cases 3 and 4), ceftriaxone treatment was withdrawn, and ursodeoxycholic acid (UDCA) was started in cases 1 and 2. A complete recovery was observed in all but case 1, in whom cholelithiasis was still detectable at one-year follow-up by ultrasonography. This case underwent a triple antibiotic protocol for bacterial meningitis. The protocol included rifampicin, which is known to have an effect in decreasing hepatic concentration of bile salts. Therefore, in this case, both rifampicin and UDCA were of no benefit in preventing or treating ceftriaxone biliary complications. The current pharmacological approach for the treatment of ceftriaxonerelated cholelithiasis seems to be ineffective, likely due to the high calcium content of gallstones. Therefore, the best strategy of intervention for ceftriaxone biliary complications in children remains the prevention of the risk factors

High Resolution X-Ray Micro-CT of Ultra-Thin Wall Space Components

A high resolution micro-CT system has been assembled and is being used to provide optimal characterization for ultra-thin wall space components. The Glenn Research Center NDE Sciences Team, using this CT system, has assumed the role of inspection vendor for the Advanced Stirling Convertor (ASC) project at NASA. This article will discuss many aspects of the development of the CT scanning for this type of component, including CT system overview; inspection requirements; process development, software utilized and developed to visualize, process, and analyze results; calibration sample development; results on actual samples; correlation with optical/SEM characterization; CT modeling; and development of automatic flaw recognition software. Keywords: Nondestructive Evaluation, NDE, Computed Tomography, Imaging, X-ray, Metallic Components, Thin Wall Inspectio

Comparative use of aqueous humour 1H NMR metabolomics and potassium concentration for PMI estimation in an animal model

Estimation of the post-mortem interval (PMI) remains a matter of concern in the forensic scenario. Traditional and novel approaches are not yet able to fully address this issue, which relies on complex biological phenomena triggered by death. For this purpose, eye compartments may be chosen for experimental studies because they are more resistant to post-mortem modifications. Vitreous humour, in particular, has been extensively investigated, with potassium concentration ([K+]) being the marker that is better correlated with PMI estimation. Recently, a 1H nuclear magnetic resonance (NMR) metabolomic approach based on aqueous humour (AH) from an animal model was proposed for PMI estimation, resulting in a robust and validated regression model. Here we studied the variation in [K+] in the same experimental setup. [K+] was determined through capillary ion analysis (CIA) and a regression analysis was performed. Moreover, it was investigated whether the PMI information related to potassium could improve the metabolome predictive power in estimating the PMI. Interestingly, we found that a part of the metabolomic profile is able to explain most of the information carried by potassium, suggesting that the rise in both potassium and metabolite concentrations relies on a similar biological mechanism. In the first 24-h PMI window, the AH metabolomic profile shows greater predictive power than [K+] behaviour, suggesting its potential use as an additional tool for estimating the time since death