188 research outputs found

    Reference standardization and triglyceride interference of a new homogeneous HDL-cholesterol assay compared with a former chemical precipitation assay

    Get PDF
    A homogeneous HDL-c assay (HDL-H), which uses polyethylene glycol-modified enzymes and sulfated alpha-cyclodextrin, was assessed for precision, accuracy, and cholesterol and triglyceride interference. In addition, its analytical performance was compared with that of a phosphotungstic acid (PTA)/MgCl2 precipitation method (HDL-P). Within-run CVs were < or = 1.87%; total CVs were < or = 3.08%. Accuracy was evaluated in fresh normotriglyceridemic sera using the Designated Comparison Method (HDL-H = 1.037 Designated Comparison Method + 4 mg/L; n = 63) and in moderately hypertriglyceridemic sera by using the Reference Method (HDL-H = 1.068 Reference Method - 17 mg/L; n = 41). Mean biases were 4.5% and 2.2%, respectively. In hypertriglyceridemic sera (n = 85), HDL-H concentrations were increasingly positively biased with increasing triglyceride concentrations. The method comparison between HDL-H and HDL-P yielded the following equation: HDL-H = 1.037 HDL-P + 15 mg/L; n = 478. We conclude that HDL-H amply meets the 1998 NCEP recommendations for total error; its precision is superior compared with that of HDL-P, and its average bias remains below +/-5% as long as triglyceride concentrations are < or = 10 g/L and in case of moderate hypercholesterolemia

    Organizing Engineering Work - A Comparative-Analysis

    Get PDF
    This article analyzes the organization of engineering work in six industrial capitalist countries. It identifies four major models for the organization of engineering work; the engineering profession did not succeed in achieving professional “closure” in any of the six countries under review. A review of the historical evolution of the organization of engineering work in each of the six countries reveals that engineering has been shaped by a complex interaction among the profession itself, employers, the state, labor, and preindustrial forces. However, none of the national variations on the four models for organizing engineering labor is stable or without internal contradiction because of the ambiguous “intermediate” position of engineers

    Collaboration and knowledge exchange between scholars in Britain and the empire, 1830–1914

    Get PDF
    In recent years there has been a growing interest among historians in the British Empire as a space of knowledge production and circulation. Much of this work assumes that scholarly cooperation and collaboration between individuals and institutions within the Empire had the effect (and often also the aim) of strengthening both imperial ties and the idea of empire. This chapter argues, however, that many examples of scholarly travel, exchange, and collaboration were undertaken with very different goals in mind. In particular, it highlights the continuing importance of an ideal of scientific internationalism, which stressed the benefits of scholarship for the whole of humanity and prioritized the needs and goals of individual academic and scientific disciplines. As the chapter shows, some scholars even went on to develop nuanced critiques of the imperial project while using the very structures of empire to further their own individual, disciplinary and institutional goals

    Effects of Crystalline Anisotropy and Indenter Size on Nanoindentation by Multiscale Simulation

    Get PDF
    Nanoindentation processes in single crystal Ag thin film under different crystallographic orientations and various indenter widths are simulated by the quasicontinuum method. The nanoindentation deformation processes under influences of crystalline anisotropy and indenter size are investigated about hardness, load distribution, critical load for first dislocation emission and strain energy under the indenter. The simulation results are compared with previous experimental results and Rice-Thomson (R-T) dislocation model solution. It is shown that entirely different dislocation activities are presented under the effect of crystalline anisotropy during nanoindentation. The sharp load drops in the load–displacement curves are caused by the different dislocation activities. Both crystalline anisotropy and indenter size are found to have distinct effect on hardness, contact stress distribution, critical load for first dislocation emission and strain energy under the indenter. The above quantities are decreased at the indenter into Ag thin film along the crystal orientation with more favorable slip directions that easy trigger slip systems; whereas those will increase at the indenter into Ag thin film along the crystal orientation with less or without favorable slip directions that hard trigger slip systems. The results are shown to be in good agreement with experimental results and R-T dislocation model solution

    Survey of Leafhopper Species in Almond Orchards Infected with Almond Witches'-Broom Phytoplasma in Lebanon

    Get PDF
    Leafhoppers (Hemiptera: Auchenorrhyncha: Cicadellidae) account for more than 80% of all “Auchenorrhynchous” vectors that transmit phytoplasmas. The leafhopper populations in two almond witches'-broom phytoplasma (AlmWB) infected sites: Tanboureet (south of Lebanon) and Bourj El Yahoudieh (north of Lebanon) were surveyed using yellow sticky traps. The survey revealed that the most abundant species was Asymmetrasca decedens, which represented 82.4% of all the leafhoppers sampled. Potential phytoplasma vectors in members of the subfamilies Aphrodinae, Deltocephalinae, and Megophthalminae were present in very low numbers including: Aphrodes makarovi, Cicadulina bipunctella, Euscelidius mundus, Fieberiella macchiae, Allygus theryi, Circulifer haematoceps, Neoaliturus transversalis, and Megophthalmus scabripennis. Allygus theryi (Horváth) (Deltocephalinae) was reported for the first time in Lebanon. Nested PCR analysis and sequencing showed that Asymmetrasca decedens, Empoasca decipiens, Fieberiella macchiae, Euscelidius mundus, Thamnottetix seclusis, Balclutha sp., Lylatina inexpectata, Allygus sp., and Annoplotettix danutae were nine potential carriers of AlmWB phytoplasma. Although the detection of phytoplasmas in an insect does not prove a definite vector relationship, the technique is useful in narrowing the search for potential vectors. The importance of this information for management of AlmWB is discussed

    Political travel across the ‘Iron Curtain’ and Communist youth identities in West Germany and Greece in the 1970s and 1980s

    Get PDF
    This article explores tours through the Iron Curtain arranged by West German and Greek pro-Soviet Communist youth groups, in an attempt to shed light on the transformation of European youth cultures beyond the ‘Americanisation’ story. It argues that the concept of the ‘black box’, employed by Rob Kroes to describe the influence of American cultural patterns on Western European youth, also applies to the reception of Eastern Bloc policies and norms by the Communists under study. Such selective reception was part of these groups’ efforts to devise a modernity alternative to the ‘capitalist’ one, an alternative modernity which tours across the Iron Curtain would help establish. Nevertheless, the organisers did not wish such travel to help eliminate American/Western influences on youth lifestyles entirely: the article analyses the excursions’ aims with regard to two core components of youth lifestyles in Western Europe since the 1960s, which have been affected by intra-Western flows, the spirit of ‘doing one’s own thing’ and transformations of sexual practices. The article also addresses the experience of the travellers in question, showing that they felt an unresolved tension: the tours neither served as a means of Sovietisation nor as an impulse to develop an openly anti-Soviet stance.PostprintPeer reviewe
    • 

    corecore