Variable force, eddy-current or magnetic damper

An object of the invention is to provide variable damping for resonant vibrations which may occur at different rotational speeds in the range of rpms in which a rotating machine is operated. A variable force damper in accordance with the invention includes a rotating mass carried on a shaft which is supported by a bearing in a resilient cage. The cage is attached to a support plate whose rim extends into an annular groove in a housing. Variable damping is effected by tabs of electrically conducting nonmagnetic material which extend radially from the cage. The tabs at an index position lie between the pole face of respective C shaped magnets. The magnets are attached by cantilever spring members to the housing

Potable water dispenser

A dispenser particularly suited for use in dispensing potable water into food and beverage reconstitution bags is described. The dispenser is characterized by an expansible chamber, selectively adjustable stop means for varying the maximum dimensions, a rotary valve, and a linear valve coupled in a cooperating relation for delivering potable water to and from the chamber

Optimization of 4-Mercaptobenzoic Acid in SiO2-Ag Colloid Aerogel Using Surface-Enhanced Raman Spectroscopy

Aerogels have been studied as potential insulating and conducting materials, but little research has been conducted characterizing organic molecules in aerogel matrices using surface-enhanced Raman spectroscopy (SERS). In this study, SiO2-Ag colloid aerogels were used as enhanced surfaces for SERS. SERS spectra of 4-mercaptobenzoic acid (4-MCBA) adsorbed to acid- and base-catalyzed SiO2-Ag colloid aerogels were obtained. It was observed that acid-catalyzed silver sol gels with 4-MCBA mixed within the matrix provided SERS spectra with sharper and more enhanced peaks than the base-catalyzed silver sol gels

Hydrostatic bearing support

A hydrostatic bearing support system is provided which comprises a bearing housing having a polygonally configured outer surface which defines at least three symmetrically disposed working faces and a plurality of pressure plates, each of which is disposed relatively opposite a corresponding working face and spaced therefrom to define a gap therebetween. A hydrostatic support film is created in the gap for supporting the housing in spaced relationship to the pressure plates

Passive eddy-current damping as a means of vibration control in cryogenic turbomachinery

Lateral shaft vibrations produced by a rotating unbalance weight were damped by means of eddy currents generated in copper conductors that were precessing cyclicly in the gap formed by the pole faces of C-shaped, permanent magnets. The damper assembly, which was located at the lower bearing support of a vertically oriented rotor was completely immersed in liquid nitrogen during the test run. The test rotor was operated over a speed range from 800 to 10,000 rpm. Three magnet/conductor designs were evaluated. Experimental damping coefficients varied from 180 to 530 N sec/m. Reasonable agreement was noted for theoretical values of damping for these same assemblies. Values of damping coefficients varied from 150 to 780 N sec/m. The results demonstrate that passive eddy-current damping is a viable candidate for vibration control in cryogenic turbomachinery

Steady-state unbalance response of a three-disk flexible rotor on flexible, damped supports

Experimental data are presented for the unbalance response of a flexible, ball bearing supported rotor to speeds above the third lateral bending critical. Values of squeeze film damping coefficients obtained from measured data are compared to theoretical values obtained from short bearing approximation over a frequency range from 5000 to 31 000 cycles/min. Experimental response for an undamped rotor is compared to that of one having oil squeeze film dampers at the bearings. Unbalance applied varied from 0.62 to 15.1 gm-cm

Experimentally determined stiffness and damping of an inherently compensated air squeeze-film damper

Values of damping and stiffness were determined experimentally for an externally pressurized, inherently compensated, compressible squeeze-film damper up to excitation frequencies of 36,000 cycles per minute. Experimental damping values were higher than theory predicted at low squeeze numbers and less than predicted at high squeeze numbers. Experimental values of air film stiffness were less than theory predicted at low squeeze numbers and much greater at higher squeeze numbers. Results also indicate sufficient damping to attenuate amplitudes and forces at the critical speed when using three dampers in the flexible support system of a small, lightweight turborotor

A system for extracting 3-dimensional measurements from a stereo pair of TV cameras

Obtaining accurate three-dimensional (3-D) measurement from a stereo pair of TV cameras is a task requiring camera modeling, calibration, and the matching of the two images of a real 3-D point on the two TV pictures. A system which models and calibrates the cameras and pairs the two images of a real-world point in the two pictures, either manually or automatically, was implemented. This system is operating and provides three-dimensional measurements resolution of + or - mm at distances of about 2 m

On the problem of embedding picture elements in regions

A few new algorithms for region growing in pictures were developed. These algorithms are a step toward finding a satisfactory solution to the image segmentation problem, and in-depth understanding of the problems of nonsemantic image segmentation. The algorithms utilize a sequential decision approach for region boundaries detection. The sequential decisions are supported by a stochastic algorithm that maintains local statistics of the region near the boundaries as the region grows. A few illustrations of the algorithm's performance are included