Investigating Ramp Wave Propagation inside Silica Glass with Laser Experiments and Molecular Simulations

Under elastic shock compression silica glass exhibits a very specific behaviour. A shock propagating inside a material is usually seen as the propagation of a discontinuity. However in silica glass, shocks are unstable and lead to the propagation of a ramp wave where the shock front becomes gradually larger over time. Ramp waves were already reported in the literature, however their origin remain uncertain. This work presents an original study combining laser shock-induced experiments and molecular dynamics simulation aiming to improve the understanding of the mechanisms involved. Experimental ramp waves were directly observed using shadowgraphy technique allowing for an estimation of the head and tail velocities. Molecular dynamics simulations were carried out in order to reproduce ramp waves and to gain insight into the material properties. Ramp waves were observed for both elastic and plastic shockwaves. In the latter case, the plastic waves were preceded by an elastic ramp precursor. The sound speed, related to the material compressibility, was found to decrease with increasing pressure, as observed experimentally for quasi-static hydrostatic loading, thus providing an explanation for the instabilities that lead to the propagation of ramp waves

Band offsets at zincblende-wurtzite GaAs nanowire sidewall surfaces

The band structure and the Fermi level pinning at clean and well-ordered sidewall surfaces of zincblende (ZB)-wurtzite (WZ) GaAs nanowires are investigated by scanning tunneling spectroscopy and density functional theory calculations. The WZ-ZB phase transition in GaAs nanowires introduces p-i junctions at the sidewall surfaces. This is caused by the presence of numerous steps, which induce a Fermi level pinning at different energies on the non-polar WZ and ZB sidewall facets.This study was financially supported by the EQUIPEX program Excelsior, the European Community’s Seventh Framework Program (Grant No. PITN-GA-2012- 316751, “Nanoembrace” Project) and the Impuls- und Vernetzungsfonds of the Helmholtz-Gemeinschaft Deutscher Forschungszentren under Grant No. HIRG-0014. T. Xu acknowledges the support from the National Natural Science Foundation of China (Grant No. 61204014)

Laser impulse coupling measurements at 400 fs and 80 ps using the LULI facility at 1057 nm wavelength

At the École Polytechnique « LULI » facility, we have measured the impulse coupling coefficient Cm (target momentum per joule of incident laser light) with several target materials in vacuum, at 1057 nm and 400 fs and 80 ps pulse duration. A total of 64 laser shots were completed in a two-week experimental campaign, divided between the two pulse durations and among the materials. Our main purpose was to resolve wide discrepancies among reported values for Cm in the 100 ps region, where many applications exist. A secondary purpose was to compare Cm at 400 fs and 80 ps pulse duration. The 80 ps pulse was obtained by partial compression. Materials were Al, Ta, W, Au, and POM (polyoxymethylene, trade name Delrin). One application of these results is to pulsed laser ablation propulsion in space, including space debris re-entry, where narrow ranges in Cm and specific impulse Isp spell the difference between dramatic and uneconomical performance. We had difficulty measuring mass loss from single shots. Imparted momentum in single laser shots was determined using pendulum deflection and photonic Doppler velocimetry. Cm was smaller at the 400 fs pulse duration than at 80 ps. To our surprise, Cm for Al at 80 ps was at most 30 N/MW with 30 kJ/m2 incident fluence. On the other extreme, polyoxymethylene (POM, trade name Delrin) demonstrated 770 N/MW under these conditions. Together, these results offer the possibility of designing a Cm value suited to an application, by mixing the materials appropriately

Electron transport via local polarons at interface atoms

Electronic transport is profoundly modified in the presence of strong electron-vibration coupling. We show that in certain situations, the electron flow takes place only when vibrations are excited. By controlling the segregation of boron in semiconducting Si(111)-3√×3√R30° surfaces, we create a type of adatom with a dangling-bond state that is electronically decoupled from any other electronic state. However, probing this state with scanning tunnelling microscopy at 5 K yields high currents. These findings are rationalized by ab-initio calculations that show the formation of a local polaron in the transport process

A Small but Efficient Collaboration for the Spiral2 Control System Development

http://accelconf.web.cern.ch/AccelConf/ICALEPCS2013/papers/tucobab01.pdfThe Spiral2 radioactive ion beam facility to be commissioned in 2014 at Ganil (Caen) is built within international collaborations. This also concerns the control system development shared by three laboratories: Ganil has to coordinate the control and automated systems work packages, CEA/IRFU is in charge of the "injector" (sources and low energy beam lines) and the LLRF, CNRS/IPHC provides the emittancemeters and a beam diagnostics platform. Besides the technology Epics based, this collaboration, although being handled with a few people, nevertheless requires an appropriate and tight organization to reach the objectives given by the project. This contribution describes how, started in 2006, the collaboration for controls has been managed both from the technological point of view and the organizational one, taking into account not only the previous experience, technical background or skill of each partner, but also their existing working practices and "cultural" approaches. A first feedback comes from successful beam tests carried out at Saclay and Grenoble; a next challenge is the migration to operation, Ganil having to run Spiral2 as the other members are moving to new projects

Physical Activity and Cardiac Function in Long-Term Breast Cancer Survivors:A Cross-Sectional Study

Background: Higher levels of physical activity are associated with a lower risk of cardiovascular disease in the general population. Whether the same holds for women who underwent treatment for breast cancer is unclear. Objectives: The aim of this study was to evaluate the association between physical activity in a typical week in the past 12 months and cardiac dysfunction in breast cancer survivors. Methods: We used data from a cohort of breast cancer survivors who were treated at ages 40 to 50 years (N = 559). The association between physical activity and global longitudinal strain (GLS) and left ventricular ejection fraction (LVEF) was evaluated using both linear and modified Poisson regression analyses adjusted for relevant confounders. Results: In total, 559 breast cancer survivors were included, with median age of 55.5 years and a median time since treatment of 10.2 years. GLS was less favorable in inactive survivors (−17.1%) than in moderately inactive (−18.4%), moderately active (−18.2%), and active survivors (−18.5%), with an adjusted significant difference for active versus inactive survivors (β = −1.31; 95% CI: −2.55 to −0.06)). Moderately active (n = 57/130) and active survivors (n = 87/124) had significantly lower risks of abnormal GLS (defined as >−18%) compared with inactive survivors (n = 17/26) (RR: 0.65 [95% CI: 0.45-0.94] and RR: 0.61 [95% CI: 0.43-0.87], respectively). LVEF, in normal ranges in all activity categories, was not associated with physical activity. Conclusions: In long-term breast cancer survivors, higher physical activity levels were associated with improved GLS but not LVEF, with the relatively largest benefit for doing any activity versus none. This finding suggests that increasing physical activity may contribute to cardiovascular health benefits, especially in inactive survivors

Laser induced dynamic fracture of fused silica: Experiments and simulations

Fused silica samples were subjected to laser induced shock loading. Laser flux was varied in order to obtain different amounts and characteristics of damage in the samples. Three dimensional damage and fracture maps of two identical samples impacted by high and low laser flux values were obtained using both optical microscopy and X-ray computed micro-tomography. Three prevalent fracture and damage patterns were identified. Peridynamic approach was used to simulate the laser impact conditions on the samples in order to explain the causes of the observed fracture and damage morphologies. A proprietary shock physics code, ESTHER, was used to calculate the transient kinetic energy imparted to the samples based on the experimental laser flux values. The kinetic energy values were then integrated over time and provided target values to match for the peridynamic impact conditions. The main fracture patterns were captured by peridynamic simulations with reasonable quantitative accuracy. Explanations for initiation and propagation of each of the fracture patterns were presented based on the peridynamic dynamic fracture simulations. Limitations of the computational approach and recommendations for future work is provided