3,894 research outputs found
Analysis and calculation of macrosegregation in a casting ingot. MPS solidification model. Volume 1: Formulation and analysis
The physical and numerical formulation of a model for the horizontal solidification of a binary alloy is described. It can be applied in an ingot. The major purpose of the model is to calculate macrosegregation in a casting ingot which results from flow of interdendritic liquid during solidification. The flow, driven by solidification contractions and by gravity acting on density gradients in the interdendritic liquid, was modeled as flow through a porous medium. The symbols used are defined. The physical formulation of the problem leading to a set of equations which can be used to obtain: (1) the pressure field; (2) the velocity field: (3) mass flow and (4) solute flow in the solid plus liquid zone during solidification is presented. With these established, the model calculates macrosegregation after solidification is complete. The numerical techniques used to obtain solution on a computational grid are presented. Results, evaluation of the results, and recommendations for future development of the model are given. The macrosegregation and flow field predictions for tin-lead, aluminum-copper, and tin-bismuth alloys are included as well as comparisons of some of the predictions with published predictions or with empirical data
MPS solidification model. Analysis and calculation of macrosegregation in a casting ingot
Work performed on several existing solidification models for which computer codes and documentation were developed is presented. The models describe the solidification of alloys in which there is a time varying zone of coexisting solid and liquid phases; i.e., the S/L zone. The primary purpose of the models is to calculate macrosegregation in a casting or ingot which results from flow of interdendritic liquid in this S/L zone during solidification. The flow, driven by solidification contractions and by gravity acting on density gradients in the interdendritic liquid, is modeled as flow through a porous medium. In Model 1, the steady state model, the heat flow characteristics are those of steady state solidification; i.e., the S/L zone is of constant width and it moves at a constant velocity relative to the mold. In Model 2, the unsteady state model, the width and rate of movement of the S/L zone are allowed to vary with time as it moves through the ingot. Each of these models exists in two versions. Models 1 and 2 are applicable to binary alloys; models 1M and 2M are applicable to multicomponent alloys
A comparison between detailed and configuration-averaged collisional-radiative codes applied to non-local thermal equilibrium plasma
A collisional-radiative model describing nonlocal-thermodynamic-equilibrium
plasmas is developed. It is based on the HULLAC (Hebrew University Lawrence
Livermore Atomic Code) suite for the transitions rates, in the zero-temperature
radiation field hypothesis. Two variants of the model are presented: the first
one is configuration averaged, while the second one is a detailed level
version. Comparisons are made between them in the case of a carbon plasma; they
show that the configuration-averaged code gives correct results for an
electronic temperature Te=10 eV (or higher) but fails at lower temperatures
such as Te=1 eV. The validity of the configuration-averaged approximation is
discussed: the intuitive criterion requiring that the average
configuration-energy dispersion must be less than the electron thermal energy
turns out to be a necessary but far from sufficient condition. Another
condition based on the resolution of a modified rate-equation system is
proposed. Its efficiency is emphasized in the case of low-temperature plasmas.
Finally, it is shown that near-threshold autoionization cascade processes may
induce a severe failure of the configuration-average formalism.Comment: 9
Complex microwave conductivity of PrCeCuO thin films using a cavity perturbation method
We report a study of the microwave conductivity of electron-doped
PrCeCuO superconducting thin films using a
cavity perturbation technique. The relative frequency shifts obtained for the
samples placed at a maximum electric field location in the cavity are treated
using the high conductivity limit presented recently by Peligrad
Using two resonance modes, TE (16.5 GHz) and TE
(13 GHz) of the same cavity, only one adjustable parameter is needed
to link the frequency shifts of an empty cavity to the ones of a cavity loaded
with a perfect conductor. Moreover, by studying different sample
configurations, we can relate the substrate effects on the frequency shifts to
a scaling factor. These procedures allow us to extract the temperature
dependence of the complex penetration depth and the complex microwave
conductivity of two films with different quality. Our data confirm that all the
physical properties of the superconducting state are consistent with an order
parameter with lines of nodes. Moreover, we demonstrate the high sensitivity of
these properties on the quality of the films
Reconciling Semiclassical and Bohmian Mechanics: I. Stationary states
The semiclassical method is characterized by finite forces and smooth,
well-behaved trajectories, but also by multivalued representational functions
that are ill-behaved at turning points. In contrast, quantum trajectory
methods--based on Bohmian mechanics (quantum hydrodynamics)--are characterized
by infinite forces and erratic trajectories near nodes, but also well-behaved,
single-valued representational functions. In this paper, we unify these two
approaches into a single method that captures the best features of both, and in
addition, satisfies the correspondence principle. Stationary eigenstates in one
degree of freedom are the primary focus, but more general applications are also
anticipated.Comment: 17 pages, 5 figure
Study on the neuronal circuits implicated in postural tremor and hypokinesia
The effect of various tegmentary lesions at the level of the pontomesenchphalon in monkeys on motor function was observed. The importance of the monoaminergic mechanisms of the brainstem is discussed. The results also show the importance of the descending tegmentary rubral system and the rubroolivocerebellar circuit in controlling peripheral motor activity. The destruction of the sensory motor cortex proves to be a more effective way of eliminating spontaneous or harmaline induced tremor than the complete interruption of the pyramidal system on the level of the cerebral peduncle
The PS 40 MHz bunching cavity
A 40 MHz cavity has been designed and built at CERN as part of the preparation of the PS as injector for LHC. The cavity will provide the necessary bunch spacing of 25 ns prior to injection into SPS and subsequently LHC. The mechanical design of the copper coated steel cavity was dominated by space constraints in the PS tunnel and by vacuum requirements. The salient design features described are i) tight, multipactor-free, capacitive coupling from the power amplifier, ii) fast RF feedback, iii) inductively coupled tuners, iv) an efficient, pneumatically operated gap short-circuit. The operation cycle consists of an adiabatic capture up to 100 kV gap voltage, a non-adiabatic jump to 300 kV, and subsequent bunch rotation. The multipactor voltage level at the gap lies below the operating voltage range and is easily passed through. A fast RF feedback system with a total group delay of 220 ns copes with heavy beam loading (1011 protons/bunch) and prevents unwanted interaction with other beams in the PS. The cavity has recently been installed, the nominal gap voltage of 300 kV has been attained, and bunch lengths below 8 ns have been achieved in first tests at nominal intensity. Experimental results are reported
- …