Optimal behavior of viscoelastic flow at resonant frequencies

The global entropy generation rate in the zero-mean oscillatory flow of a Maxwell fluid in a pipe is analyzed with the aim at determining its behavior at resonant flow conditions. This quantity is calculated explicitly using the analytic expression for the velocity field and assuming isothermal conditions. The global entropy generation rate shows well-defined peaks at the resonant frequencies where the flow displays maximum velocities. It was found that resonant frequencies can be considered optimal in the sense that they maximize the power transmitted to the pulsating flow at the expense of maximum dissipation.Comment: Paper accepted to be published in Phys. Rev.

Application-layer Performance Analysis of PRIME in Smart Metering Networks

This paper assesses the performance of actual PRIME v1.3.6 and PRIME v1.4 systems when used for Smart Metering applications. The analysis is performed at the application level using the DLMS/COSEM stack. Hence, it considers performance indicators that are of practical interest for distribution system operators, such as the availability and the average time needed to read the energy load profile of all the meters. To this end, two test networks with 112 smart meters have been deployed in the laboratory (to ensure the stability of the network). In one of them all the Service Nodes communicate directly with the Base Node, while there exist up to 5 switching levels in the other tested network. First, the PRIME v1.3.6 system is evaluated, stressing the significant performance gain that can be obtained by implementing some MAC layer strategies, which are compatible with the specification but not specifically defined on it. Then,the improvement offered by the PRIME v1.4 system is assessed.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Multilayer hazes over Saturn’s hexagon from Cassini ISS limb images

Producción CientíficaVer abstract

Membranas sintéticas impermeables y capas auxiliares separadoras en la cubierta plana invertida. Efecto de la presión sobre la degradación

Flat roofs are inverted when the insulation material is placed over the waterproofing membrane. This widely-used constructive system sets materials which may interact easily with each other causing their deterioration. The incompatibilities and the materials that may interact with each other are not completely described, the elements currently used to separate the materials are not totally efficient to avoid deterioration. This paper intends to enlarge the knowledge regarding the materials that are incompatible for inverted flat roofs, the conditions were interactions take place and the efficiency of some alternative solutions to separate the materials. The ethylene propylene diene monomer (EPDM) waterproofing membranes are incompatible with the extruded polystyrene (XPS). The interactions between incompatible materials increase with the pressure.Las cubiertas planas son invertidas cuando el material aislante se coloca sobre la membrana impermeable. Este sistema constructivo ampliamente utilizado emplea materiales que pueden interactuar con facilidad entre ellos, produciendo deterioro. Las incompatibilidades y los materiales que pueden interactuar no se han descrito completamente, los elementos utilizados actualmente para separar los materiales no son totalmente eficientes para evitar el deterioro. Este artículo pretende aumentar el conocimiento acerca de que materiales son incompatibles en la cubierta invertida plana, las condiciones para que las interacciones se den, y la eficiencia de algunas alternativas para separar materiales. Las membranas impermeables de etileno propileno monómero dieno (EPDM) son incompatibles con el poliestireno extrusionado (XPS). Las interacciones entre materiales incompatibles aumentan con la presión

Estudio comparativo con microscopio electrónico de barrido de la degradación de una lámina impermeable de cloruro de polivinilo plastificado en diferentes condiciones

This paper discusses the analysis of several samples of a plasticized polyvinyl chloride (PVC-P) waterproofing membrane. The samples were extracted from different areas of the same flat roof, which was in service for over 12 years. An original sample of an identical PVC-P membrane that was not installed on the roof was also analyzed. The analysis of the materials was carried out using a scanning electron microscope (SEM). An elemental analysis of every sample was also performed by energy dispersive X-ray spectroscopy (EDS). Micrographs and the elemental composition of the samples were compared with the data obtained in the analysis of the original sample. The results show dehydrochlorination of the polymer in two of the samples studied and great deterioration that was not visible to the naked eye in the sample that was totally exposed to the weather.Este estudio discute el análisis de varias muestras de una membrana impermeable de cloruro de polivinilo plastificado (PVC-P). Las muestras fueron extraídas de diferentes áreas de la misma cubierta plana, que estuvo en servicio durante más de 12 años. Una muestra original de idéntica membrana de PVC-P que no estuvo instalada en la cubierta fue también analizada. El análisis de los materiales se llevó a cabo utilizando un microscopio electrónico de barrido (MEB). Además se realizó un análisis elemental sobre cada una de las muestras mediante espectroscopía de dispersión de energía de rayos X (EDS). Las micrografías, y la composición elemental de las muestras, se comparan con los datos obtenidos en el análisis de la muestra original. Los resultados muestran deshidrocloración del polímero en dos de las muestras estudiadas, y un gran deterioro de la muestra totalmente expuesta a la intemperie, que no era visible a simple vista