28 research outputs found
Spatiotemporal release of VEGF from biodegradable polylactic-co-glycolic acid microspheres induces angiogenesis in chick chorionic allantoic membrane assay
The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.While vascular endothelial growth factor (VEGF) is an acknowledged potent pro-angiogenic agent there is a need
to deliver it at an appropriate concentration for several days to achieve angiogenesis. The aim of this study was
to produce microspheres of biodegradable polylactic-co-glycolic acid (PLGA) tailored to achieve sustained release
of VEGF at an appropriate concentration over seven days, avoiding excessive unregulated release of VEGF
that has been associated with the formation of leaky blood vessels. Several formulations were examined to
produce microspheres loaded with both human serum albumin (HSA) and VEGF to achieve release of VEGF
between 3 and 10 ng per ml for seven days to match the therapeutic window desired for angiogenesis. In vitro
experiments showed an increase in endothelial cell proliferation in response to microspheres bearing VEGF.
Similarly, when microspheres containing VEGF were added to the chorionic membrane of fertilised chicken eggs,
there was an increase in the development of blood vessels over seven days in response, which was significant for
microspheres bearing VEGF and HSA, but not VEGF alone. There was an increase in both blood vessel density
and branching – both signs of proangiogenic activity. Further, there was clearly migration of cells to the VEGF
loaded microspheres. In summary, we describe the development of an injectable delivery vehicle to achieve
spatiotemporal release of physiologically relevant levels of VEGF for several days and demonstrate the angiogenic
response to this. We propose that such a treatment vehicle would be suitable for the treatment of ischemic
tissue or wounds
Targeted protein delivery: carbodiimide crosslinking influences protein release from microparticles incorporated within collagen scaffolds
open access articleTissue engineering response may be tailored via controlled, sustained release of active agents from protein-loaded degradable microparticles incorporated directly within three-dimensional (3D) ice-templated collagen scaffolds. However, the effects of covalent crosslinking during scaffold preparation on the availability and release of protein from the incorporated microparticles have not been explored. Here, we load 3D ice-templated collagen scaffolds with controlled additions of poly-(DL-lactide-co-glycolide) microparticles. We probe the effects of subsequent N-(3-dimethylaminopropyl)- N0-ethylcarbodiimide hydrochloride crosslinking on protein release, using microparticles with different internal protein distributions. Fluorescein isothiocyanate labelled bovine serum albumin is used as a model protein drug. The scaffolds display a homogeneous microparticle distribution,
and a reduction in pore size and percolation diameter with increased microparticle addition, although these values did not fall below those reported as necessary for cell invasion. The protein distribution within the microparticles, near the surface or more deeply located within the microparticles, was important in determining the release profile and effect of crosslinking, as the surface
was affected by the carbodiimide crosslinking reaction applied to the scaffold. Crosslinking of microparticles with a high proportion of protein at the surface caused both a reduction and delay in protein release. Protein located within the bulk of the microparticles, was protected from the crosslinking reaction and no delay in the overall release profile was seen
Delivery of definable number of drug or growth factor loaded poly(dl-lactic acid-co-glycolic acid) microparticles within human embryonic stem cell derived aggregates
Embryoid bodies (EBs) generated from embryonic stem cells are used to study processes of differentiation within a three dimensional (3D) cell environment. In many instances however, EBs are dispersed to single cell suspensions with a subsequent monolayer culture. Moreover, where the 3D integrity of an EB is maintained, cytokines or drugs of interest to stimulate differentiation are often added directly to the culture medium at fixed concentrations and effects are usually limited to the outer layers of the EB. The aim of this study was to create an EB model with localised drug and or growth factor delivery directly within the EB. Using poly(DL-lactic acid-co-glycolic acid) microparticles (MPs) with an average diameter of 13 μm, we have demonstrated controllable incorporation of defined numbers of MPs within human ES cell derived EBs, down to 1 MP per EB. This was achieved by coating MPs with human ES cell lysate and centrifugation of specific ratios of ES cells and MPs to form 3D aggregates. Using MPs loaded with simvastatin (pro or active drug) or BMP-2, we have demonstrated osteogenic differentiation within the 3D aggregates, maintained in culture for up to 21 days, and quantified by real time QPCR for osteocalcin. Immunostaining for RUNX2 and osteocalcin, and also histochemical staining with picrosirius red to demonstrate collage type 1 and Alizarin red to demonstrate calcium/mineralisation further demonstrated osteogenic differentiation and revealed regional staining associated with the locations of MPs within the aggregates. We also demonstrated endothelial differentiation within human ES cell-derived aggregates using VEGF loaded MPs. In conclusion, we demonstrate an effective and reliable approach for engineering stem aggregates with definable number of MPs within the 3D cellular structure. We also achieved localised osteogenic and endothelial differentiation associated with MPs releasing encapsulated drug molecules or cytokines directly within the cell aggregate. This provides a powerful tool for controlling and investigating differentiation within 3D cell cultures and has applications to drug delivery, drug discovery, stem cell biology, tissue engineering and regenerative medicine
Targeted protein delivery: carbodiimide crosslinking influences protein release from microparticles incorporated within collagen scaffolds.
Tissue engineering response may be tailored via controlled, sustained release of active agents from protein-loaded degradable microparticles incorporated directly within three-dimensional (3D) ice-templated collagen scaffolds. However, the effects of covalent crosslinking during scaffold preparation on the availability and release of protein from the incorporated microparticles have not been explored. Here, we load 3D ice-templated collagen scaffolds with controlled additions of poly-(DL-lactide-co-glycolide) microparticles. We probe the effects of subsequent N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride crosslinking on protein release, using microparticles with different internal protein distributions. Fluorescein isothiocyanate labelled bovine serum albumin is used as a model protein drug. The scaffolds display a homogeneous microparticle distribution, and a reduction in pore size and percolation diameter with increased microparticle addition, although these values did not fall below those reported as necessary for cell invasion. The protein distribution within the microparticles, near the surface or more deeply located within the microparticles, was important in determining the release profile and effect of crosslinking, as the surface was affected by the carbodiimide crosslinking reaction applied to the scaffold. Crosslinking of microparticles with a high proportion of protein at the surface caused both a reduction and delay in protein release. Protein located within the bulk of the microparticles, was protected from the crosslinking reaction and no delay in the overall release profile was seen.This work was supported by the European Research Council [ERC Advanced Grant 320598 3D-E] and was also funded by a grant from the Medical Research Council, Arthritis Research UK, Reumafonds and the UKRM
A dual-application poly (DL-lactic-co-glycolic) acid (PLGA)-chitosan composite scaffold for potential use in bone tissue engineering
The development of patient-friendly alternatives to bone-graft procedures is the driving force for new frontiers in bone tissue engineering. Poly (DL-lactic-co-glycolic acid), (PLGA) and chitosan are well-studied and easy-to-process polymers from which scaffolds can be fabricated. In this study, a novel dual-application scaffold system was formulated from porous PLGA and protein-loaded PLGA/chitosan microspheres. Physicochemical and in vitro protein release attributes were established. The therapeutic relevance, cytocompatibility with primary human mesenchymal stem cells (hMSCs) and osteogenic properties were tested. There was a significant reduction in burst release from the composite PLGA/chitosan microspheres compared with PLGA alone. Scaffolds sintered from porous microspheres at 37°C were significantly stronger than the PLGA control, with compressive strengths of 0.846 ± 0.272 MPa and 0.406 ± 0.265 MPa, respectively (p < 0.05). The formulation also sintered at 37°C following injection through a needle, demonstrating its injectable potential. The scaffolds demonstrated cytocompatibility, with increased cell numbers observed over an 8-day study period. Von Kossa and immunostaining of the hMSC-scaffolds confirmed their osteogenic potential with the ability to sinter at 37°C in situ
Quality by design micro-engineering optimisation of NSAID-loaded electrospun fibrous patches
The purpose of this study was to apply the Quality by Design (QbD) approach to the electrospinning of fibres loaded with the nonsteroidal anti-inflammatory drugs (NSAIDs) indomethacin (INDO) and diclofenac sodium (DICLO). A Quality Target Product Profile (QTPP) was made, and risk assessments (preliminary hazard analysis) were conducted to identify the impact of material attributes and process parameters on the critical quality attributes (CQAs) of the fibres. A full factorial design of experiments (DoE) of 20 runs was built, which was used to carry out experiments. The following factors were assessed: Drugs, voltage, flow rate, and the distance between the processing needle and collector. Release studies exhibited INDO fibres had greater total release of active drug compared to DICLO fibres. Voltage and distance were found to be the most significant factors of the experiment. Multivariate statistical analytical software helped to build six feasible design spaces and two flexible, universal design spaces for both drugs, at distances of 5 cm and 12.5 cm, along with a flexible control strategy. The current findings and their analysis confirm that QbD is a viable and invaluable tool to enhance product and process understanding of electrospinning for the assurance of high-quality fibres
Electrohydrodynamic Atomisation Driven Design and Engineering of Opportunistic Particulate Systems For Applications in Drug Delivery, Therapeutics and Pharmaceutics
The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.Electrohydrodynamic atomisation (EHDA) technologies have evolved significantly over the past decade; branching into several established and emerging healthcare remits through timely advances in the engineering sciences and tailored conceptual process designs. More specifically for pharmaceutical and drug delivery spheres, electrospraying (ES) has presented itself as a high value technique enabling a plethora of different particulate structures. However, when coupled with novel formulations (e.g. co-flows) and innovative device aspects (e.g., materials and dimensions), core characteristics of particulates are manipulated and engineered specifically to deliver an application driven need, which is currently lacking, ranging from imaging and targeted delivery to controlled release and sensing. This demonstrates the holistic nature of these emerging technologies; which is often overlooked. Parametric driven control during particle engineering via the ES method yields opportunistic properties when compared to conventional methods, albeit at ambient conditions (e.g., temperature and pressure), making this extremely valuable for sensitive biologics and molecules of interest. Furthermore, several processing (e.g., flow rate, applied voltage and working distance) and solution (e.g., polymer concentration, electrical conductivity and surface tension) parameters impact ES modes and greatly influence the production of resulting particles. The formation of a steady cone-jet and subsequent atomisation during ES fabricates particles demonstrating monodispersity (or near monodispersed), narrow particle size distributions and smooth or textured morphologies; all of which are successfully incorporated in a one-step process. By following a controlled ES regime, tailored particles with various intricate structures (hollow microspheres, nanocups, Janus and cell-mimicking nanoparticles) can also be engineered through process head modifications central to the ES technique (single-needle spraying, coaxial, multi-needle and needleless approaches). Thus, intricate formulation design, set-up and combinatorial engineering of the EHDA process delivers particulate structures with a multitude of applications in tissue engineering, theranostics, bioresponsive systems as well as drug dosage forms for specific delivery to diseased or target tissues. This advanced technology has great potential to be implemented commercially, particularly on the industrial scale for several unmet pharmaceutical and medical challenges and needs. This review focuses on key seminal developments, ending with future perspectives addressing obstacles that need to be addressed for future advancement
Microparticles for sustained growth factor delivery in the regeneration of critically-sized segmental tibial bone defects
The Publisher's final version can be found by following the DOI link. Open access article.This study trialled the controlled delivery of growth factors within a biodegradable scaffold in a large segmental bone defect model. We hypothesised that co-delivery of vascular endothelial growth factor (VEGF) and platelet derived growth factor (PDGF) followed by bone morphogenetic protein-2 (BMP-2) could be more effective in stimulating bone repair than the delivery of BMP-2 alone. Poly(lactic-co-glycolic acid) (PLGA ) based microparticles were used as a delivery system to achieve a controlled release of growth factors within a medical-grade Polycaprolactone (PCL) scaffold. The scaffolds were assessed in a well-established preclinical ovine tibial segmental defect measuring 3 cm. After six months, mechanical properties and bone tissue regeneration were assessed. Mineralised bone bridging of the defect was enhanced in growth factor treated groups. The inclusion of VEGF and PDGF (with BMP-2) had no significant effect on the amount of bone regeneration at the six-month time point in comparison to BMP-2 alone. However, regions treated with VEGF and PDGF showed increased vascularity. This study demonstrates an effective method for the controlled delivery of therapeutic growth factors in vivo, using microparticles
Assessing the ex vivo permeation behaviour of functionalised contact lens coatings engineered using an electrohydrodynamic technique
In vitro testing alone is no longer considered sufficient evidence presented solely with respect to drug release and permeation testing. These studies are thought to be more reliable and representative when using tissue or animal models; as opposed to synthetic membranes. The release of anti-glaucoma drug timolol maleate from electrically atomised coatings was assessed here using freshly excised bovine corneal tissue. Electrohydrodynamic processing was utilised to engineer functionalised fibrous polyvinylpyrrolidone-Poly (N-isopropylacrylamide) coatings on the outer side of commercial silicone contact lenses. Benzalkonium chloride, ethylenediaminetetraacetic acid, Brij® 78 and borneol were employed as permeation enhancers to see their effect on ex vivo permeation of timolol maleate through the cornea. Formulations containing permeation enhancers showed a vast improvement with respect to cumulative amount of drug permeating through the cornea as shown by a six fold decrease in lag time compared to enhancer-free formulations. Most drug delivery systems require the drug to pass or permeate through a tissue or biological membrane. This study has shown that to fully appreciate and understand how a novel drug delivery system will behave not only within the device but with the external environment or tissue, it is imperative to have in vitro and ex vivo data in conjunction
Injectable and porous PLGA microspheres that form highly porous scaffolds at body temperature
Injectable scaffolds are of interest in the field of regenerative medicine because of their minimally invasive mode of delivery. For tissue repair applications, it is essential that such scaffolds have the mechanical properties, porosity and pore diameter to support the formation of new tissue. In the current study, porous poly(DL-lactic acid-co-glycolic acid) (PLGA) microspheres were fabricated with an average size of 84 ± 24 lm for use as injectable cell carriers. Treatment with ethanolic sodium hydroxide for 2 min was observed to increase surface porosity without causing the microsphere structure to disintegrate. This surface treatment also enabled the microspheres to fuse together at 37 C to form scaffold structures. The average compressive strength of the scaffolds after 24 h at 37 C was 0.9 ± 0.1 MPa, and the average Young’s modulus was 9.4 ± 1.2 MPa. Scaffold porosity levels were 81.6% on average, with a mean pore diameter of 54 ± 38 lm. This study demonstrates a method for fabricating porous PLGA microspheres that form solid porous scaffolds at body temperature, creating an injectable system capable of supporting NIH-3T3 cell attachment and proliferation in vitro