Ignition of thermally sensitive explosives between a contact surface and a shock

The dynamics of ignition between a contact surface and a shock wave is investigated using a one-step reaction model with Arrhenius kinetics. Both large activation energy asymptotics and high-resolution finite activation energy numerical simulations are employed. Emphasis is on comparing and contrasting the solutions with those of the ignition process between a piston and a shock, considered previously. The large activation energy asymptotic solutions are found to be qualitatively different from the piston driven shock case, in that thermal runaway first occurs ahead of the contact surface, and both forward and backward moving reaction waves emerge. These waves take the form of quasi-steady weak detonations that may later transition into strong detonation waves. For the finite activation energies considered in the numerical simulations, the results are qualitatively different to the asymptotic predictions in that no backward weak detonation wave forms, and there is only a weak dependence of the evolutionary events on the acoustic impedance of the contact surface. The above conclusions are relevant to gas phase equation of state models. However, when a large polytropic index more representative of condensed phase explosives is used, the large activation energy asymptotic and finite activation energy numerical results are found to be in quantitative agreement

Numerical experiments on short-term meteorological effects on solar variability

A set of numerical experiments was conducted to test the short-range sensitivity of a large atmospheric general circulation model to changes in solar constant and ozone amount. On the basis of the results of 12-day sets of integrations with very large variations in these parameters, it is concluded that realistic variations would produce insignificant meteorological effects. Any causal relationships between solar variability and weather, for time scales of two weeks or less, rely upon changes in parameters other than solar constant or ozone amounts, or upon mechanisms not yet incorporated in the model

Grain boundaries in polycrystalline materials for energy applications: First principles modeling and electron microscopy

\ua9 2024 Author(s). Polycrystalline materials are ubiquitous in technology, and grain boundaries have long been known to affect materials properties and performance. First principles materials modeling and electron microscopy methods are powerful and highly complementary for investigating the atomic scale structure and properties of grain boundaries. In this review, we provide an introduction to key concepts and approaches for investigating grain boundaries using these methods. We also provide a number of case studies providing examples of their application to understand the impact of grain boundaries for a range of energy materials. Most of the materials presented are of interest for photovoltaic and photoelectrochemical applications and so we include a more in depth discussion of how modeling and electron microscopy can be employed to understand the impact of grain boundaries on the behavior of photoexcited electrons and holes (including carrier transport and recombination). However, we also include discussion of materials relevant to rechargeable batteries as another important class of materials for energy applications. We conclude the review with a discussion of outstanding challenges in the field and the exciting prospects for progress in the coming years

Sample-Clock Phase-Control Feedback

To demodulate a communication signal, a receiver must recover and synchronize to the symbol timing of a received waveform. In a system that utilizes digital sampling, the fidelity of synchronization is limited by the time between the symbol boundary and closest sample time location. To reduce this error, one typically uses a sample clock in excess of the symbol rate in order to provide multiple samples per symbol, thereby lowering the error limit to a fraction of a symbol time. For systems with a large modulation bandwidth, the required sample clock rate is prohibitive due to current technological barriers and processing complexity. With precise control of the phase of the sample clock, one can sample the received signal at times arbitrarily close to the symbol boundary, thus obviating the need, from a synchronization perspective, for multiple samples per symbol. Sample-clock phase-control feedback was developed for use in the demodulation of an optical communication signal, where multi-GHz modulation bandwidths would require prohibitively large sample clock frequencies for rates in excess of the symbol rate. A custom mixedsignal (RF/digital) offset phase-locked loop circuit was developed to control the phase of the 6.4-GHz clock that samples the photon-counting detector output. The offset phase-locked loop is driven by a feedback mechanism that continuously corrects for variation in the symbol time due to motion between the transmitter and receiver as well as oscillator instability. This innovation will allow significant improvements in receiver throughput; for example, the throughput of a pulse-position modulation (PPM) with 16 slots can increase from 188 Mb/s to 1.5 Gb/s

DOT Transmit Module

The Deep Space Optical Terminal (DOT) transmit module demonstrates the DOT downlink signaling in a flight electronics assembly that can be qualified for deep space. The assembly has the capability to generate an electronic pulse-position modulation (PPM) waveform suitable for driving a laser assembly to produce the optical downlink signal. The downlink data enters the assembly through a serializer/ deserializer (SERDES) interface, and is encoded using a serially concatenated PPM (SCPPM) forward error correction code. The encoded data is modulated using PPM with an inter-symbol guard time to aid in receiver synchronization. Monitor and control of the assembly is via a low-voltage differential signal (LVDS) interfac

Neuronal regulation of cochlear blood flow in the guinea‐pig.

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/110011/1/tjp19944803563.pd

Processing second-order stochastic dominance models using cutting-plane representations

This is the post-print version of the Article. The official published version can be accessed from the links below. Copyright @ 2011 Springer-VerlagSecond-order stochastic dominance (SSD) is widely recognised as an important decision criterion in portfolio selection. Unfortunately, stochastic dominance models are known to be very demanding from a computational point of view. In this paper we consider two classes of models which use SSD as a choice criterion. The first, proposed by Dentcheva and Ruszczyński (J Bank Finance 30:433–451, 2006), uses a SSD constraint, which can be expressed as integrated chance constraints (ICCs). The second, proposed by Roman et al. (Math Program, Ser B 108:541–569, 2006) uses SSD through a multi-objective formulation with CVaR objectives. Cutting plane representations and algorithms were proposed by Klein Haneveld and Van der Vlerk (Comput Manage Sci 3:245–269, 2006) for ICCs, and by Künzi-Bay and Mayer (Comput Manage Sci 3:3–27, 2006) for CVaR minimization. These concepts are taken into consideration to propose representations and solution methods for the above class of SSD based models. We describe a cutting plane based solution algorithm and outline implementation details. A computational study is presented, which demonstrates the effectiveness and the scale-up properties of the solution algorithm, as applied to the SSD model of Roman et al. (Math Program, Ser B 108:541–569, 2006).This study was funded by OTKA, Hungarian National Fund for Scientific Research, project 47340; by Mobile Innovation Centre, Budapest University of Technology, project 2.2; Optirisk Systems, Uxbridge, UK and by BRIEF (Brunel University Research Innovation and Enterprise Fund)

Pentoxifylline increases cochlear blood flow while decreasing blood pressure in guinea pigs

The effects of pentoxifylline on cochlear blood flow (CoBF) were investigated in anesthetized guinea pigs by laser Doppler flowmetry and intravital microscopy red blood cell velocity measurement. Intra-arterial infusion of pentoxifylline (3, 4, and 5 mg/kg/min) produced dose-dependent reductions in blood pressure, accompanied by significant elevations in CoBF that were not dose-dependent. These results are in general agreement with previous findings from our laboratory utilizing normotensive and spontaneously hypertensive rats, however, in contrast with rats, guinea pigs revealed an initial decrease in CoBF followed by an increase. Also, pentoxifylline produced relatively smaller elevations in CoBF in guinea pigs as compared with those previously reported in rats. Taken together these results support the hypothesis that pentoxifylline increases vascular perfusion by decreasing blood viscosity and increasing the plasticity of red blood cells.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/28442/1/0000229.pd

Grain boundaries in polycrystalline materials for energy applications : First principles modeling and electron microscopy

Polycrystalline materials are ubiquitous in technology, and grain boundaries have long been known to affect materials properties and performance. First principles materials modeling and electron microscopy methods are powerful and highly complementary for investigating the atomic scale structure and properties of grain boundaries. In this review, we provide an introduction to key concepts and approaches for investigating grain boundaries using these methods. We also provide a number of case studies providing examples of their application to understand the impact of grain boundaries for a range of energy materials. Most of the materials presented are of interest for photovoltaic and photoelectrochemical applications and so we include a more in depth discussion of how modeling and electron microscopy can be employed to understand the impact of grain boundaries on the behavior of photoexcited electrons and holes (including carrier transport and recombination). However, we also include discussion of materials relevant to rechargeable batteries as another important class of materials for energy applications. We conclude the review with a discussion of outstanding challenges in the field and the exciting prospects for progress in the coming years