Defect Reduction with the Use of Seven Quality Control Tools for Productivity Improvement at an Automobile Company

The goal of zero defects is pursued by many manufacturing and service companies. In this regard, statistical tools are being used for defect reduction leading to productivity improvement. In this work, seven traditional QC tools (flow chart, check sheet, histogram, Pareto chart, cause, and effect diagram, scatter diagram and control chart) have been developed and implemented in an automobile company to assess and improve the defect reduction level in the assembly line. Chassis and trim lined were selected for data collection to assess and improve the defect level for productivity improvement. It was found from the results that after the successful implementation of the QC tools, the defect level reduced by 90% (from 132 to 13 defects) at the chassis line. Similarly, the defect level was reduced by 80% (from 157 to 28 defects) at the trim line. The automobile company implemented only a few of the seven QC tools in their assembly line. It is suggested that the company may need to manage a mechanism for the implementation of all seven QC tools in every section of the company

Cell Death or Survival Promoted by Alternative Isoforms of ErbB4

The report demonstrates that two distinct isoforms of the ErbB4 receptor tyrosine kinase stimulate either proliferation or apoptosis by mechanisms involving differential transcriptional regulation of the PDGFRA gene. These data have implications for developing approaches to target ErbB4 signaling in cancer

Evaluation of cadmium, lead, nickel and zinc status in biological samples of smokers and nonsmokers hypertensive patients

The objective of this study was to evaluate the association between trace and toxic elements zinc (Zn), cadmium (Cd), nickel (Ni) and lead (Pb) in biological samples (scalp hair, blood and urine) of smoker and nonsmoker hypertensive patients (n=457), residents of Hyderabad, Pakistan. For the purpose of comparison, the biological samples of age-matched healthy controls were selected as referents. The concentrations of trace and toxic elements were measured by atomic absorption spectrophotometer prior to microwave-assisted acid digestion. The validity and accuracy of the methodology were checked using certified reference materials and by the conventional wet acid digestion method on the same certified reference materials and real samples. The recovery of all the studied elements was found to be in the range of 97.8–99.3% in certified reference materials. The results of this study showed that the mean values of Cd, Ni and Pb were significantly higher in scalp hair, blood and urine samples of both smoker and nonsmoker patients than in referents (P<0.001), whereas the concentration of Zn was lower in the scalp hair and blood, but higher in the urine samples of hypertensive patients. The deficiency of Zn and the high exposure of toxic metals as a result of tobacco smoking may be synergistic with risk factors associated with hypertension

Supply chain sustainability performance measurement of small and medium sized enterprises using structural equation modeling

Sustainability of small and medium sized enterprises (SMEs) is significant as SMEs contribute to GDP substantially in every economy. This research develops an innovative sustainable supply chain performance measurement model for SMEs. Prior researches predominantly use balanced score card (BSC) approach that presume causal relationship of criteria and Data Envelopment Analysis (DEA), which derive efficiency of units from a few input and output criteria. While DEA is effective for policymakers, BSC is more suitable for individual SME. The proposed method that uses structural equation modeling (SEM) approach to derive the relationship of criteria and criteria weights formulates regression-type models for a specific region as well as for specific SME. The SEM-based supply chain sustainability performance measurement model is beneficial to policymakers as they can determine means for improvement at a regional level. The proposed method could also facilitate managers/owners of individual SMEs with measures for improving their supply chain sustainability performance. The method has been applied to three varied geographical locations in the UK, France and India in order to demonstrate its effectiveness

Complement component 3 (C3) expression in the hippocampus after excitotoxic injury: role of C/EBPβ

[Background] The CCAAT/enhancer-binding protein β (C/EBPβ) is a transcription factor implicated in the control of proliferation, differentiation, and inflammatory processes mainly in adipose tissue and liver; although more recent results have revealed an important role for this transcription factor in the brain. Previous studies from our laboratory indicated that CCAAT/enhancer-binding protein β is implicated in inflammatory process and brain injury, since mice lacking this gene were less susceptible to kainic acid-induced injury. More recently, we have shown that the complement component 3 gene (C3) is a downstream target of CCAAT/enhancer-binding protein β and it could be a mediator of the proinflammatory effects of this transcription factor in neural cells.[Methods] Adult male Wistar rats (8–12 weeks old) were used throughout the study. C/EBPβ+/+ and C/EBPβ–/– mice were generated from heterozygous breeding pairs. Animals were injected or not with kainic acid, brains removed, and brain slices containing the hippocampus analyzed for the expression of both CCAAT/enhancer-binding protein β and C3.[Results] In the present work, we have further extended these studies and show that CCAAT/enhancer-binding protein β and C3 co-express in the CA1 and CA3 regions of the hippocampus after an excitotoxic injury. Studies using CCAAT/enhancer-binding protein β knockout mice demonstrate a marked reduction in C3 expression after kainic acid injection in these animals, suggesting that indeed this protein is regulated by C/EBPβ in the hippocampus in vivo.[Conclusions] Altogether these results suggest that CCAAT/enhancer-binding protein β could regulate brain disorders, in which excitotoxic and inflammatory processes are involved, at least in part through the direct regulation of C3.This work was supported by MINECO, Grant SAF2014-52940-R and partially financed with FEDER funds. CIBERNED is funded by the Instituto de Salud Carlos III. JAM-G was supported by CIBERNED. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).Peer reviewe

Participative Leadership and Organizational Identification in SMEs in the MENA Region: Testing the Roles of CSR Perceptions and Pride in Membership

The aim of this research is to explore the process linking participative leadership to organizational identification. The study examines the relationship between participative leadership and internal CSR perceptions of employees and also investigates the role that pride in membership plays in the affiliation of CSR perceptions with organizational identification. By studying these relationships, the paper aspires to contemplate new presumed mediators in the association of participative leadership with organizational identification as well as determine a possible novel antecedent of employee CSR perceptions. Empirical evidence is provided from data that was collected through a survey distributed to employees working for small- and medium-sized enterprises in three countries in the Middle East and North Africa regions, particularly the United Arab Emirates, Lebanon, and Tunisia. Findings show that participative leadership leads to positive internal CSR perceptions of employees and that these CSR perceptions lead to pride in membership which, in turn, results in organizational identification. Implications of these findings are also discussed

Guidelines for the use and interpretation of assays for monitoring autophagy (4th edition)1.

In 2008, we published the first set of guidelines for standardizing research in autophagy. Since then, this topic has received increasing attention, and many scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Thus, it is important to formulate on a regular basis updated guidelines for monitoring autophagy in different organisms. Despite numerous reviews, there continues to be confusion regarding acceptable methods to evaluate autophagy, especially in multicellular eukaryotes. Here, we present a set of guidelines for investigators to select and interpret methods to examine autophagy and related processes, and for reviewers to provide realistic and reasonable critiques of reports that are focused on these processes. These guidelines are not meant to be a dogmatic set of rules, because the appropriateness of any assay largely depends on the question being asked and the system being used. Moreover, no individual assay is perfect for every situation, calling for the use of multiple techniques to properly monitor autophagy in each experimental setting. Finally, several core components of the autophagy machinery have been implicated in distinct autophagic processes (canonical and noncanonical autophagy), implying that genetic approaches to block autophagy should rely on targeting two or more autophagy-related genes that ideally participate in distinct steps of the pathway. Along similar lines, because multiple proteins involved in autophagy also regulate other cellular pathways including apoptosis, not all of them can be used as a specific marker for bona fide autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field