3D printed grid shell in ice composite

This paper presents the design of a grid shell that is made of fibre reinforced ice and constructed by combining additive manufacturing with an inflatable mould. While previous fibre reinforced ice structures were constructed by spraying, additive manufacturing with ice has not yet been tested before. Additive manufacturing is a stepwise production technique where material is being added layer by layer, resulting in a high degree of formability. Combining this printing technique with sustainable materials such as ice makes it possible to develop more sustainable structures and building applications in cold environments such as Mars or the poles. To test this application, a grid shell of fibre reinforced ice was designed and eventually constructed. The grid shell was designed by considering the design constraints of the inflatable mould that needed to support the wet ice layers during construction. The structural capacity of the grid shell was enhanced by performing an optimization procedure on the gridlines. In the end, a theoretical failure load calculation shows that the middle part of the structure could carry more than 6000 kg of additional load. To test this finding, the constructed grid shell was loaded on site with approximately 3000 kg, without showing any signs of failure. By designing and testing this innovative object, this project illustrates that additive manufacturing can successfully be applied for other structural applications such as sculptures, moulding and Mars missions.</p

Криостимуляция околораневых и раневых тканей в лечении длительно не заживающих ран и язв конечностей

Представлен опыт применения разработанного автором метода криостимуляции околораневых и раневых тканей, его сочетания с атравматическим адгезивным растяжением тканей у больных с длительно не заживающими ранами и язвами конечностей. Определены критерии его безопасного применения и эффекты влияния на ткани. Получены положительные результаты в восстановлении опорных и других тканей конечностей.The experience of application of the original method of cryostimulation of wound tissue and its combination with atraumatic adhesive stretching of the tissue in patients with persisting wounds and ulcers of the extremities is presented. The criteria of its safe use and effects of influence on the tissue were determined. Positive results in restoration of supporting and other tissue of the extremities were obtained

Recommendation to Reduce Patients’ Blood Pressure and Cholesterol Medication Costs

The Community Preventive Services Task Force recommends reducing patient out-of-pocket costs (ROPC) for medications to control high blood pressure and high cholesterol when combined with additional interventions aimed at improving patient–provider interaction and patient knowledge, such as team-based care with medication counseling, and patient education

Acidithiobacillus ferrooxidans metabolism: from genome sequence to industrial applications

<p>Abstract</p> <p>Background</p> <p><it>Acidithiobacillus ferrooxidans </it>is a major participant in consortia of microorganisms used for the industrial recovery of copper (bioleaching or biomining). It is a chemolithoautrophic, γ-proteobacterium using energy from the oxidation of iron- and sulfur-containing minerals for growth. It thrives at extremely low pH (pH 1–2) and fixes both carbon and nitrogen from the atmosphere. It solubilizes copper and other metals from rocks and plays an important role in nutrient and metal biogeochemical cycling in acid environments. The lack of a well-developed system for genetic manipulation has prevented thorough exploration of its physiology. Also, confusion has been caused by prior metabolic models constructed based upon the examination of multiple, and sometimes distantly related, strains of the microorganism.</p> <p>Results</p> <p>The genome of the type strain <it>A. ferrooxidans </it>ATCC 23270 was sequenced and annotated to identify general features and provide a framework for <it>in silico </it>metabolic reconstruction. Earlier models of iron and sulfur oxidation, biofilm formation, quorum sensing, inorganic ion uptake, and amino acid metabolism are confirmed and extended. Initial models are presented for central carbon metabolism, anaerobic metabolism (including sulfur reduction, hydrogen metabolism and nitrogen fixation), stress responses, DNA repair, and metal and toxic compound fluxes.</p> <p>Conclusion</p> <p>Bioinformatics analysis provides a valuable platform for gene discovery and functional prediction that helps explain the activity of <it>A. ferrooxidans </it>in industrial bioleaching and its role as a primary producer in acidic environments. An analysis of the genome of the type strain provides a coherent view of its gene content and metabolic potential.</p

Evaluation of sit-stand workstations in an office setting: A randomised controlled trial

Background: Excessive sitting time is a risk factor for cardiovascular disease mortality and morbidity independent of physical activity. This aim of this study was to evaluate the impact of a sit-stand workstation on sitting time, and vascular, metabolic and musculoskeletal outcomes in office workers, and to investigate workstation acceptability and feasibility. Methods: A two-arm, parallel-group, individually randomised controlled trial was conducted in one organisation. Participants were asymptomatic full-time office workers aged ≥18 years. Each participant in the intervention arm had a sit-stand workstation installed on their workplace desk for 8 weeks. Participants in the control arm received no intervention. The primary outcome was workplace sitting time, assessed at 0, 4 and 8 weeks by an ecological momentary assessment diary. Secondary behavioural, cardiometabolic and musculoskeletal outcomes were assessed. Acceptability and feasibility were assessed via questionnaire and interview. ANCOVA and magnitude-based inferences examined intervention effects relative to controls at 4 and 8 weeks. Participants and researchers were not blind to group allocation. Results: Forty-seven participants were randomised (intervention n = 26; control n = 21). Relative to the control group at 8 weeks, the intervention group had a beneficial decrease in sitting time (-80.2 min/8-h workday (95 % CI = -129.0, -31.4); p = 0.002), increase in standing time (72.9 min/8-h workday (21.2, 124.6); p = 0.007) and decrease in total cholesterol (-0.40 mmol/L (-0.79, -0.003); p = 0.049). No harmful changes in musculoskeletal discomfort/pain were observed relative to controls, and beneficial changes in flow-mediated dilation and diastolic blood pressure were observed. Most participants self-reported that the workstation was easy to use and their work-related productivity did not decrease when using the device. Factors that negatively influenced workstation use were workstation design, the social environment, work tasks and habits. Conclusion: Short-term use of a feasible sit-stand workstation reduced daily sitting time and led to beneficial improvements in cardiometabolic risk parameters in asymptomatic office workers. These findings imply that if the observed use of the sit-stand workstations continued over a longer duration, sit-stand workstations may have important ramifications for the prevention and reduction of cardiometabolic risk in a large proportion of the working population. Trial registration: ClinicalTrials.gov NCT02496507

Etk/Bmx Regulates Proteinase-Activated-Receptor1 (PAR1) in Breast Cancer Invasion: Signaling Partners, Hierarchy and Physiological Significance

BACKGROUND: While protease-activated-receptor 1 (PAR(1)) plays a central role in tumor progression, little is known about the cell signaling involved. METHODOLOGY/PRINCIPAL FINDINGS: We show here the impact of PAR(1) cellular activities using both an orthotopic mouse mammary xenograft and a colorectal-liver metastasis model in vivo, with biochemical analyses in vitro. Large and highly vascularized tumors were generated by cells over-expressing wt hPar1, Y397Z hPar1, with persistent signaling, or Y381A hPar1 mutant constructs. In contrast, cells over-expressing the truncated form of hPar1, which lacks the cytoplasmic tail, developed small or no tumors, similar to cells expressing empty vector or control untreated cells. Antibody array membranes revealed essential hPar1 partners including Etk/Bmx and Shc. PAR(1) activation induces Etk/Bmx and Shc binding to the receptor C-tail to form a complex. Y/A mutations in the PAR(1) C-tail did not prevent Shc-PAR(1) association, but enhanced the number of liver metastases compared with the already increased metastases obtained with wt hPar1. We found that Etk/Bmx first binds via the PH domain to a region of seven residues, located between C378-S384 in PAR(1) C-tail, enabling subsequent Shc association. Importantly, expression of the hPar1-7A mutant form (substituted A, residues 378-384), which is incapable of binding Etk/Bmx, resulted in inhibition of invasion through Matrigel-coated membranes. Similarly, knocking down Etk/Bmx inhibited PAR(1)-induced MDA-MB-435 cell migration. In addition, intact spheroid morphogenesis of MCF10A cells is markedly disrupted by the ectopic expression of wt hPar1. In contrast, the forced expression of the hPar1-7A mutant results in normal ball-shaped spheroids. Thus, by preventing binding of Etk/Bmx to PAR(1) -C-tail, hPar1 oncogenic properties are abrogated. CONCLUSIONS/SIGNIFICANCE: This is the first demonstration that a cytoplasmic portion of the PAR(1) C-tail functions as a scaffold site. We identify here essential signaling partners, determine the hierarchy of binding and provide a platform for therapeutic vehicles via definition of the critical PAR(1)-associating region in the breast cancer signaling niche